A high temperature ultrafast isolated converter to turn-off normally-on SiC JFETs

Silicon Carbide (SiC) components are accepted devices for high temperature and high efficiency applications. Normally-on SiC JFETs are now commercialized and will be used in future power converters. However, such devices are conducting when not driven with a sufficient negative voltage, which can lead to safety issues during start-up or abnormal operation of the gate driver. Therefore, it is needed to generate an auxiliary negative voltage to turn-off the JFET in order to protect the system. Moreover, insulation is necessary to cover all failure modes. Prior papers presented solution to protect such devices but no high temperature isolated solution were demonstrated. In this paper, a solution to protect JFETs used in a high temperature (200°C) voltage source inverter is proposed. The protection circuit, components selection and characterizations for high temperature application are detailed. Experimental results are provided and validate the design of the isolated normally-on protection circuit up to 200°C.

[1]  Tarek Ben Salah,et al.  Failure modes and robustness of SiC JFET transistors under current limiting operations , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[2]  T. Friedli,et al.  Design and Performance of a 200-kHz All-SiC JFET Current DC-Link Back-to-Back Converter , 2009, IEEE Transactions on Industry Applications.

[3]  Di Zhang,et al.  Development of a 10 kW high power density three-phase ac-dc-ac converter using SiC devices , 2009, 2009 13th European Conference on Power Electronics and Applications.

[4]  Bruno Allard,et al.  High temperature anti short circuit function for normally-on SiC JFET in an inverter leg configuration , 2012 .

[5]  B. Allard,et al.  Towards an airborne high temperature SiC inverter , 2008, 2008 IEEE Power Electronics Specialists Conference.

[6]  Sung Joon Kim,et al.  Implementation of a fully integrated 50 kW inverter using a SiC JFET based six-pack power module , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[7]  Régis Meuret,et al.  High Temperature Inverter for Airborne Application , 2010 .

[8]  Hervé Morel,et al.  Design of High Temperature EMI Input Filter for a 2 kW HVDC-fed Inverter , 2010 .

[9]  Rémi Robutel.  Etude des composants passifs pour l'électronique de puissance à "haute température" : application au filtre CEM d'entrée , 2011 .

[10]  Richard L. Patterson,et al.  SOI N-Channel Field Effect Transistors, CHT-NMOS80, for Extreme Temperatures , 2009 .

[11]  Santosh Kumar Singh,et al.  Gate driver for SiC JFETs with protection against normally-on behaviour induced fault , 2011 .

[12]  D. Boroyevich,et al.  Design of high-temperature SiC three-phase AC-DC converter for >100°C ambient temperature , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[13]  Sung Joon Kim,et al.  High density 50 kW SiC inverter systems using a JFET based six-pack power module , 2011, 8th International Conference on Power Electronics - ECCE Asia.