Regional synergies for sustainable resource processing: a status report

This project is carried out under the auspice and with the financial support of the Centre for Sustainable Resource Processing, which is established and supported under the Australian Government’s Cooperative Research Centres Program. The Centre for Sustainable Resource Processing is a joint venture between Alcoa, ANSTO, CSIRO, Curtin University of Technology, Newmont, Rio Tinto, University of Queensland, University of Sydney, WMC, Xstrata, OneSteel, Orica, Rocla, Central TAFE, Ausmelt, Environment Australia, Hatch, Kwinana Industries Council, Minerals Council of Australia, NSW Minerals Council, Tesla, Gladstone Area Industrial Network and URS.

[1]  Sunil Kumar.  A perspective study on fly ash-lime gypsum bricks and hollow blocks for low cost housing development , 2002 .

[2]  A. I. Stankiewicz,et al.  Process Intensification: Transforming Chemical Engineering , 2000 .

[3]  T. Kotas.  Exergy concepts for thermal plant , 1980 .

[4]  Kim Dam-Johansen,et al.  Full-scale measurements of SO2 gas phase concentrations and slurry compositions in a wet flue gas desulphurisation spray absorber , 2004 .

[5]  Murat Mirata,et al.  Experiences from early stages of a national industrial symbiosis programme in the UK: determinants and coordination challenges , 2004 .

[6]  今井 正明,et al.  Gemba kaizen : a commonsense low-cost approach to management , 1997 .

[7]  Eugeniusz Mokrzycki,et al.  Use of alternative fuels in the Polish cement industry , 2003 .

[8]  Amory B. Lovins,et al.  Natural Capitalism: Creating the Next Industrial Revolution , 1999 .

[9]  N. Yalçın,et al.  Utilization of bauxite waste in ceramic glazes , 2000 .

[10]  V. Mymrin,et al.  Environment-friendly method of high alkaline bauxite's Red Mud and Ferrous Slag utilization as an example of green chemistry , 2003 .

[11]  Alan P. Rossiter.  ENERGY MANAGEMENT Succeed at Process Integration , 2004 .

[12]  Ralf Isenmann,et al.  Industrial ecology: shedding more light on its perspective of understanding nature as model , 2003 .

[13]  Ron Zevenhoven,et al.  CEMENT MANUFACTURING USING ALTERNATIVE FUELS AND THE ADVANTAGES OF PROCESS MODELLING , 2004 .

[14]  Judy Kincaid,et al.  Industrial Ecosystem Development at the Metropolitan Level , 2001 .

[15]  Wim G. Haije,et al.  Techno-economic feasibility of high-temperature high-lift chemical heat pumps for upgrading industrial waste heat , 2002 .

[16]  L. Ruth,et al.  Energy from municipal solid waste : A comparison with coal combustion technology , 1998 .

[17]  Akira Ono,et al.  Production of FeNi by the rotary kiln-electric furnace process at Hyuga Smelter , 1987 .

[18]  Suresh K. Bhargava,et al.  The surface chemistry of Bayer process solids: a review , 1999 .

[19]  Jouni Korhonen,et al.  Regional industrial recycling network in energy supply—the case of Joensuu city, Finland , 2002 .

[20]  R. J. Pagan,et al.  Cleaner production applications for coal utilisation , 2003 .

[21]  Nick Hallale,et al.  A NEW GRAPHICAL TARGETING METHOD FOR WATER MINIMISATION , 2002 .

[22]  Maneesh Singh,et al.  Preparation of special cements from red mud , 1996 .

[23]  L. Lorenzen,et al.  New generation leaching reactors for effective mass transfer in mineral processing operations , 2000 .

[24]  D Hjeresen,et al.  Green Chemistry: Environment, Economics, and Competitiveness , 2002 .

[25]  Roshan Jeet Jee Jachuck.  Process Intensification for Responsive Processing , 2002 .

[26]  B. Linnhoff,et al.  The pinch design method for heat exchanger networks , 1983 .

[27]  F. Boons,et al.  Eco-industrial parks : stimulating sustainable development in mixed industrial parks , 2002 .

[28]  Klaus-Viktor Peinemann,et al.  Membrane Technology: in the Chemical Industry , 2001 .

[29]  Bodo Linnhoff,et al.  A User guide on process integration for the efficient use of energy , 1994 .

[30]  C.W.M. van Berkel,et al.  Cleaner production in practice: methodology development for environmental improvement of industrial production and evaluation of practical experiences , 1996 .

[31]  K. L. Narayana,et al.  Intensification of leaching process by dual-frequency ultrasound. , 2001, Ultrasonics sonochemistry.

[32]  Erich J. Schwarz,et al.  Implementing nature's lesson: The industrial recycling network enhancing regional development , 1997 .

[33]  James D. Kilgroe,et al.  Control of dioxin, furan, and mercury emissions from municipal waste combustors , 1996 .

[34]  J. Watson,et al.  Vortex magnetic separation , 1997 .

[35]  W. Vermeulen,et al.  Eco-industrial park initiatives in the USA and the Netherlands: first lessons , 2004 .

[36]  T. Hansen,et al.  Recycled concrete and fly ash make calcium silicate bricks , 1983 .

[37]  Eugeniusz Mokrzycki,et al.  Alternative fuels for the cement industry , 2003 .

[38]  Sunil Kumar,et al.  Fly ash–lime–phosphogypsum hollow blocks for walls and partitions , 2003 .

[39]  Yanmin Wang,et al.  Dry comminution and liberation with microwave assistance , 2005 .

[40]  Rene Van Berkel,et al.  Cleaner Production in Australia: Revolutionary Strategy or Incremental Tool? , 2000 .

[41]  Robert Summers,et al.  Effect of application of bauxite residue (red mud) to very sandy soils on subterranean clover yield and P response , 2001 .

[42]  Ernest A. Lowe,et al.  Creating by-product resource exchanges: Strategies for eco-industrial parks , 1997 .

[43]  L. Aylmore,et al.  Reduced leaching of nitrate, ammonium, and phosphorus in a sandy soil by fly ash amendment , 2002 .

[44]  T. Graedel,et al.  Industrial ecology: goals and definitions , 2002 .

[45]  René van Berkel,et al.  The Relationship between Cleaner Production and Industrial Ecology , 1997 .

[46]  J. Korhonen.  Four ecosystem principles for an industrial ecosystem , 2001 .

[47]  Mikhail Sorin,et al.  Combined exergy and pinch approach to process analysis , 1997 .