Effect of Temperature on Lubricated Steel/Steel Systems With or Without Fatty Acids Additives Using an Oscillating Dynamic Tribometer

The friction behavior of steel/steel contacts lubricated with glycerol, 150NS and PAO4 is investigated using a new technique. Then, three additives are used in PAO4 lubricant: oleic, linoleic and stearic acids. The experiments are performed at different temperatures. Moreover, nearly all the systems operate in either the mixed or boundary lubrication regime. The experimental methodology is able, with a high accuracy and without any force transducer, two contributions of friction: μ0, velocity-independent contribution and μ1, velocity-dependent one. This study shows that glycerol is the most effective in reducing friction among the three pure lubricants. In addition, only glycerol affects the viscous damping of the system at some operating conditions. Using the additives in PAO4, the friction is reduced. More precisely, the unsaturated fatty acids are more significant in reducing the friction than saturated acids. Moreover, the viscous damping of the apparatus is slightly affected as additives are used in PAO4.

[1]  J. Israelachvili,et al.  On the adhesion force between deformable solids , 1980 .

[2]  Charles Herbert Bovington,et al.  Lubricant chemistry including the impact of legislation , 2002 .

[3]  I. L. Singer,et al.  Hertzian stress contribution to low friction behavior of thin MoS2 coatings , 1990 .

[4]  H. Lorenz Technische Mechanik starrer Gebilde , 1924 .

[5]  Hermann L. F. Helmholtz,et al.  On the Sensations of Tone as a Physiological Basis for the Theory of Music , 2005 .

[6]  D. Marquardt An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[7]  Karin Persson,et al.  Effects of unsaturation on film structure and friction of fatty acids in a model base oil. , 2008, Journal of colloid and interface science.

[8]  SEDLEY TAYLOR,et al.  Die Lehre von den Tonempfindimgen , 1871, Nature.

[9]  Michel Belin,et al.  Dual characterization of boundary friction thanks to the harmonic tribometer: Identification of viscous and solid friction contributions , 2010 .

[10]  J. M. Martin,et al.  Full Film, Boundary Lubrication and Tribochemistry in Steel Circular Contacts Lubricated with Glycerol , 2011 .

[11]  H. Helmholtz,et al.  On the Sensations of Tone as a Physiological Basis for the Theory of Music , 2005 .

[12]  Tony L. Schmitz,et al.  The Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements , 2005 .

[13]  Lydik S. Jacobsen,et al.  Engineering Vibrations: With Applications To Structures And Machinery , 2012 .

[14]  B. Feeny,et al.  Identifying Coulomb and Viscous Friction from Free-Vibration Decrements , 1998 .

[15]  Hongzhao Liu,et al.  Identification of nonlinear viscous damping and Coulomb friction from the free response data , 2007 .

[16]  Michel Belin,et al.  An original dynamic tribotest to discriminate friction and viscous damping , 2010 .

[17]  Brian F. Feeny,et al.  A DECREMENT METHOD FOR THE SIMULTANEOUS ESTIMATION OF COULOMB AND VISCOUS FRICTION , 1996 .

[18]  Michel Belin,et al.  Exploring low friction of lubricated DLC coatings in no-wear conditions with a new relaxation tribometer , 2013 .

[19]  G. Knothe,et al.  LUBRICITY OF COMPONENTS OF BIODIESEL AND PETRODIESEL. THE ORIGIN OF BIODIESEL LUBRICITY , 2005 .

[20]  P. Claesson,et al.  Unsaturated fatty acids in alkane solution: adsorption to steel surfaces. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[21]  John William Strutt Rayleigh,et al.  The theory of sound. Vol. 2 , 2015 .

[22]  W. Sawyer,et al.  Addressing Practical Challenges of Low Friction Coefficient Measurements , 2009 .

[23]  Jin-Wei Liang,et al.  Identifying Coulomb and viscous damping from free-vibration acceleration decrements , 2005 .

[24]  L. Rayleigh,et al.  The theory of sound , 1894 .