System Identification Modelling Based On Modification Of All Terrain Vehicle (ATV) Using Wireless Control System

This paper describes the modification of all-terrain vehicle (ATV) to semi-autonomous control based on using wireless control system. The semi-autonomous for ATV is based on yaw control. This wireless control system will control the cylinder linear actuator that is added to the ATV. Nowadays, the usage of ATV gives much benefit to their field of work with their design and is dedicated to huge driveability on irregular ground track as well as on paved road. The main problem of the ATV involves the steering control (yaw control), which cannot rotate easily and needs high forces to control the movement of ATV. Yaw movement is very limited when driven manually, since it requires high forces to move the steering. This project begins with a mathematical and empirical modelling to capture the dynamics of a newly modified ATV. In this project, the modelling of ATV by using system identification technique is conducted. The model will then be compared to its derived mathematical model. Then, the design of a wireless control system is required to solve the problem, which results in an easy rotation of 45° to the left and right with precise, accurate and lightweight yaw movement and verification using MATLAB/Simulink. As a conclusion, the yaw estimation shows that the ATV movement achieved its stability at angle 45°.

[1]  Mohamad Fani Sulaima,et al.  Design And Development Of Auto Depth Control OfRemotely Operated Vehicle Using Thrusters System , 2014 .

[2]  Magdalene Andrew-Munot,et al.  Remanufacturing Process And Its Challenges , 2013 .

[3]  R. Martins,et al.  Accuracy analysis of DVL/IMU/magnetometer integrated navigation system using different IMUs in AUV , 2010, IEEE ICCA 2010.

[4]  Mohd Khair Hassan,et al.  Mathematical modeling and simulation of an electric vehicle , 2015 .

[5]  Mohd Hatta Mohammed Ariff,et al.  Optimal control strategy for low speed and high speed four-wheel-active steering vehicle , 2015 .

[6]  Firooz Bakhtiari-Nejad,et al.  TRACKING CONTROL OF AN UNDERACTUATED GANTRY CRANE USING AN OPTIMAL FEEDBACK CONTROLLER , 2013 .

[7]  Vadim Bistrov.  Performance Analysis of Alignment Process of MEMS IMU , 2012 .

[8]  M.S.M. Aras,et al.  Modelling and Analysis of All Terrain Vehicle (ATV) Using System Identification for Yaw Stability , 2015 .

[9]  Klaus D. Kuhnert,et al.  Modeling, Design and Implement of Steering Fuzzy PID Control System for DORIS Robot , 2014 .

[10]  K. R. Borole,et al.  Active Control of Quarter Car Suspension System using Linear Quadratic Regulator , 2011 .

[11]  Vimal Rau Aparow,et al.  Modeling and Torque Tracking Control of Permanent Magnet Synchronous Motor (PMSM) for Hybrid Electric Vehicle , 2013 .

[12]  K. Hudha,et al.  PERFORMANCE EVALUATION OF SHAFT SPEED CONTROL USING A MAGNETORHEOLOGICAL BRAKE , 2015 .

[13]  James C. Helmkamp,et al.  All-terrain vehicle fatalities--West Virginia, 1999-2006. , 2008, MMWR. Morbidity and mortality weekly report.

[14]  F. A. Forouhar,et al.  All-terrain vehicles frequency domain response analysis and rider behavior , 1997, Proceedings of the 1997 IEEE International Conference on Control Applications.

[15]  Zulkifli Mohd Nopiah,et al.  Stability of a Switched Linear System , 2012 .

[16]  G Hoffman,et al.  Trauma associated with three- and four-wheeled all-terrain vehicles: is the four-wheeler an unrecognized health hazard? , 1988, The American surgeon.