Hybrid PCM-based thermal management for lithium-ion batteries: Trends and challenges

[1]  Yan Ding,et al.  Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material , 2023, Applied Thermal Engineering.

[2]  M. Ramadan,et al.  Effects of Control Volume Outlet Variation on Axial Air Cooling of Lithium-Ion Batteries , 2023, International Journal of Thermofluids.

[3]  Yang Wang,et al.  A battery thermal management scheme suited for cold regions based on PCM and aerogel: Demonstration of performance and availability , 2023, Applied Thermal Engineering.

[4]  Wenhui Du,et al.  Effect of mechanical vibration on phase change material based thermal management module of a lithium-ion battery at high ambient temperature , 2023, Journal of Energy Storage.

[5]  S. Panchal,et al.  Improving the Cooling Performance of Cylindrical Lithium-Ion Battery Using Three Passive Methods in a Battery Thermal Management System , 2023, SSRN Electronic Journal.

[6]  Dawei Tang,et al.  Improved body-centered cubic unit for accurately predicting the melting characteristics of metal foam composite phase change material , 2023, International Journal of Heat and Mass Transfer.

[7]  C. Abeykoon,et al.  Encapsulation methods for phase change materials – A critical review , 2023, International Journal of Heat and Mass Transfer.

[8]  Jian Liu,et al.  Self-healed inorganic phase change materials for thermal energy harvesting and management , 2023, Applied Thermal Engineering.

[9]  M. H. Doranehgard,et al.  Recent progress in the thermal management of lithium-ion batteries , 2023, Journal of Cleaner Production.

[10]  Guanyi Chen,et al.  Experimental Study on Phase Change Material Based Thermal Management Design with Adjustable Fins for Lithium-ion Battery , 2022, Applied Thermal Engineering.

[11]  F. Veysi,et al.  Modelling and Optimisation of a Battery Thermal Management System with Nano Encapsulated Phase Change Material Slurry For 18650 Li-ion Batteries , 2022, Thermal Science and Engineering Progress.

[12]  Xun Liu,et al.  Numerical simulation of hybrid battery thermal management system combining of thermoelectric cooler and phase change material , 2022, Energy Reports.

[13]  T. Kousksou,et al.  Low-cost numerical lumped modelling of lithium-ion battery pack with phase change material and liquid cooling thermal management system , 2022, Journal of Energy Storage.

[14]  Weixiong Wu,et al.  Influence of mechanical vibration on composite phase change material based thermal management system for lithium-ion battery , 2022, Journal of Energy Storage.

[15]  Guoqing Zhang,et al.  Experimental investigation on thermal management system of composite phase change material coupled with serpentine tubes for battery module , 2022, Applied Thermal Engineering.

[16]  Z. Said,et al.  Advances in the improvement of thermal-conductivity of phase change material-based lithium-ion battery thermal management systems: An updated review , 2022, Journal of Energy Storage.

[17]  M. Mahmoud,et al.  Study of circular, horizontal and vertical elliptical enclosures filled with phase change material in thermal management of lithium-ion batteries in an air-cooled system , 2022, Journal of Energy Storage.

[18]  M. Mahmoud,et al.  The influence of battery distance on a hybrid air-cooled cylindrical lithium-ion battery phase change material thermal management system for storing solar energy , 2022, Journal of Energy Storage.

[19]  A. K. Gupta,et al.  Hybrid thermal management system for a lithium-ion battery module: Effect of cell arrangement, discharge rate, phase change material thickness and air velocity , 2022, Journal of Energy Storage.

[20]  C. Abeykoon,et al.  Phase Change Materials for Battery Thermal Management of Electric and Hybrid Vehicles: A Review , 2022, Energy Nexus.

[21]  Anas M. Abdelrahman,et al.  Effect of combined air cooling and nano enhanced phase change materials on thermal management of lithium-ion batteries , 2022, Journal of Energy Storage.

[22]  M. El-Shorbagy,et al.  Optimization and sensitivity analysis of extended surfaces during melting and freezing of phase changing materials in cylindrical Lithium-ion battery cooling , 2022, Journal of Energy Storage.

[23]  Josiah Owusu Danquah,et al.  Hybrid Battery Thermal Management System with NiTi SMA and Phase Change Material (PCM) for Li-ion Batteries , 2022, Energies.

[24]  I. Mansir,et al.  Numerical simulation of dimensions and arrangement of triangular fins mounted on cylindrical lithium-ion batteries in passive thermal management , 2022, Journal of Energy Storage.

[25]  M. Mahmoud,et al.  Simultaneous application of active and passive methods in cooling of a cylindrical lithium-ion battery by changing the size of the elliptical cavity filled with nano phase change materials , 2022, Journal of Energy Storage.

[26]  Ali E. Anqi,et al.  Air cooled lithium-ion battery with cylindrical cell in phase change material filled cavity of different shapes , 2022, Journal of Energy Storage.

[27]  Changhong Wang,et al.  Flexible composite phase change material with anti-leakage and anti-vibration properties for battery thermal management , 2022, Applied Energy.

[28]  Hui Liu,et al.  Performance analysis of phase-change material in battery thermal management with bionic leaf vein structure , 2022, Applied Thermal Engineering.

[29]  F. Jiang,et al.  Numerical study of PCM thermal behavior of a novel PCM-heat pipe combined system for Li-ion battery thermal management , 2022, Applied Thermal Engineering.

[30]  S. Haider,et al.  First principles study of layered silicon carbide as anode in lithium ion battery , 2022, International Journal of Quantum Chemistry.

[31]  J. Luo,et al.  Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review , 2022, Chemical Engineering Journal.

[32]  A. Bhattacharya,et al.  A Novel PCM and TCE based Thermal Management of Battery Module , 2022, Thermal Science and Engineering Progress.

[33]  Z. Said,et al.  Recent advances on the role of nanomaterials for improving the performance of photovoltaic thermal systems: Trends, challenges and prospective , 2021, Nano Energy.

[34]  Shuo Wang,et al.  Flexible phase change materials: preparation, properties and application , 2021, Chemical Engineering Journal.

[35]  Hussein M. Maghrabie,et al.  Performance augmentation of PV panels using phase change material cooling technique: A review , 2021, SVU-International Journal of Engineering Sciences and Applications.

[36]  Feng Zhang,et al.  Thermal performance of battery thermal management system coupled with phase change material and thermoelectric elements , 2021, Journal of Energy Storage.

[37]  A. Hoang,et al.  A technical review on composite phase change material based secondary assisted battery thermal management system for electric vehicles , 2021, Journal of Cleaner Production.

[38]  M. H. Doranehgard,et al.  Swimming of Gyrotactic Microorganism in MHD Williamson nanofluid flow between rotating circular plates embedded in porous medium: Application of thermal energy storage , 2021, Journal of Energy Storage.

[39]  M. H. Doranehgard,et al.  Numerical study on charging process inside a grid-structure thermal storage , 2021, Journal of Energy Storage.

[40]  G. Murali,et al.  A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM , 2021 .

[41]  Yu Zhang,et al.  A hybrid thermal management system with liquid cooling and composite phase change materials containing various expanded graphite contents for cylindrical lithium-ion batteries , 2021, Applied Thermal Engineering.

[42]  M. Siavashi,et al.  A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold plates , 2021 .

[43]  Zu-Guo Shen,et al.  A review on thermal management performance enhancement of phase change materials for vehicle lithium-ion batteries , 2021 .

[44]  A. Prabhakar,et al.  A review on air cooled and air centric hybrid thermal management techniques for Li-ion battery packs in electric vehicles , 2021 .

[45]  Emad Mushtaha,et al.  State-of-the-Art Technologies for Building-Integrated Photovoltaic Systems , 2021, Buildings.

[46]  Florin Mariasiu,et al.  Battery Thermal Management Systems: Current Status and Design Approach of Cooling Technologies , 2021, Energies.

[47]  Mohammad Ali Abdelkareem,et al.  Building-integrated photovoltaic/thermal (BIPVT) systems: Applications and challenges , 2021 .

[48]  M. Abdelkareem,et al.  Recent progress on Carbon-based nanomaterial for phase change materials: Prospects and challenges , 2021 .

[49]  Xia Hua,et al.  Effect of dynamic loads and vibrations on lithium-ion batteries , 2021, Journal of Low Frequency Noise, Vibration and Active Control.

[50]  M. Uzair,et al.  Numerical Simulation of Lithium-ion battery aging mechanisms and charging-discharging cycle , 2021, 2021 12th International Renewable Engineering Conference (IREC).

[51]  Guoqiang Wu,et al.  Effect of inclination angle on melting process of phase change materials in a square cavity under mechanical vibration , 2021 .

[52]  Yanlai Zhang,et al.  Design of battery thermal management system based on phase change material and heat pipe , 2021 .

[53]  Guoqiang Wu,et al.  Effects of mechanical vibration on melting behaviour of phase change material during charging process , 2021, Applied Thermal Engineering.

[54]  A. Olabi,et al.  Advancements and prospects of thermal management and waste heat recovery of PEMFC , 2021, International Journal of Thermofluids.

[55]  P. Qin,et al.  Battery thermal management system based on the forced-air convection: A review , 2020 .

[56]  M. R. Elkadeem,et al.  A state of art review and future viewpoint on advance cooling techniques for Lithium–ion battery system of electric vehicles , 2020 .

[57]  M. Berecibar,et al.  Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles , 2020 .

[58]  Tong Yan,et al.  Hybrid Battery Thermal Management System in Electrical Vehicles: A Review , 2020, Energies.

[59]  Hussein M. Maghrabie,et al.  Desalination process using humidification–dehumidification technique: A detailed review , 2020, International Journal of Energy Research.

[60]  Jian Wang,et al.  Phase Change Materials Application in Battery Thermal Management System: A Review , 2020, Materials.

[61]  Ji-zhen Liu,et al.  An innovative battery thermal management with thermally induced flexible phase change material , 2020 .

[62]  Liang Gao,et al.  A Fast Charging–Cooling Coupled Scheduling Method for a Liquid Cooling-Based Thermal Management System for Lithium-Ion Batteries , 2020 .

[63]  Zenan Wu,et al.  Comparison of Different Liquid Cooling Configurations for Effective Thermal Management of Li-Ion Pouch Cell for Automotive Applications , 2020 .

[64]  S. Mahmud,et al.  Experimental investigation of the effect of vibration on phase change material (PCM) based battery thermal management system , 2020 .

[65]  Guoqing Zhang,et al.  Optimization of the internal fin in a phase-change-material module for battery thermal management , 2020 .

[66]  Xiu-xing Yin,et al.  A novel heat pipe assisted separation type battery thermal management system based on phase change material , 2020 .

[67]  Guoming Chen,et al.  A novel battery thermal management system coupling with PCM and optimized controllable liquid cooling for different ambient temperatures , 2020, Energy Conversion and Management.

[68]  Ruijin Fan,et al.  Thermal management of the lithium-ion battery by the composite PCM-Fin structures , 2019 .

[69]  Guoqing Zhang,et al.  Thermal performance of PCM and branch-structured fins for cylindrical power battery in a high-temperature environment , 2019, Energy Conversion and Management.

[70]  S. Mahmud,et al.  Electric vehicle battery thermal management system with thermoelectric cooling , 2019, Energy Reports.

[71]  Hengyun Zhang,et al.  Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration , 2019, Applied Thermal Engineering.

[72]  Joeri Van Mierlo,et al.  Integrating renewable energy in smart grid system: Architecture, virtualization and analysis , 2019, Sustainable Energy, Grids and Networks.

[73]  Shuangfeng Wang,et al.  Form-stable and thermally induced flexible composite phase change material for thermal energy storage and thermal management applications , 2019, Applied Energy.

[74]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[75]  Guoqing Zhang,et al.  Experimental Investigation on a Thermoelectric Cooler for Thermal Management of a Lithium-Ion Battery Module , 2019, International Journal of Photoenergy.

[76]  Guoqing Zhang,et al.  A phase change material with enhanced thermal conductivity and secondary heat dissipation capability by introducing a binary thermal conductive skeleton for battery thermal management , 2019, Applied Thermal Engineering.

[77]  Ravinder Kumar,et al.  Thermal performance of a novel confined flow Li-ion battery module , 2019, Applied Thermal Engineering.

[78]  Yongliang Li,et al.  Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate , 2019, Energy.

[79]  Yanping Yuan,et al.  Flexible phase change materials for thermal storage and temperature control , 2018, Chemical Engineering Journal.

[80]  Guoming Chen,et al.  Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment , 2018, Energy Conversion and Management.

[81]  Shashank Arora,et al.  Selection of thermal management system for modular battery packs of electric vehicles: A review of existing and emerging technologies , 2018, Journal of Power Sources.

[82]  Jing Zhao,et al.  Cost-effective supply chain for electric vehicle battery remanufacturing , 2018, Applied Energy.

[83]  Guoqing Zhang,et al.  Experimental investigation of thermal management system for lithium ion batteries module with coupling effect by heat sheets and phase change materials , 2018 .

[84]  Guoqing Zhang,et al.  Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system , 2018, Applied Thermal Engineering.

[85]  Qian Huang,et al.  High-temperature effect on electrochemical performance of Li4Ti5O12 based anode material for Li-ion batteries , 2018, Journal of Alloys and Compounds.

[86]  Agis M. Papadopoulos,et al.  Life cycle analysis (LCA) and life cycle cost analysis (LCCA) of phase change materials (PCM) for thermal applications: A review , 2018 .

[87]  Yongliang Li,et al.  Thermal management of standby battery for outdoor base station based on the semiconductor thermoelectric device and phase change materials , 2018, Applied Thermal Engineering.

[88]  Joeri Van Mierlo,et al.  Phase-change materials (PCM) for automotive applications: A review , 2018 .

[89]  Yaxing Du,et al.  Optimization of thermal management system for Li-ion batteries using phase change material , 2018 .

[90]  Jean-François Fourmigué,et al.  An innovative practical battery thermal management system based on phase change materials: Numerical and experimental investigations , 2018 .

[91]  Ibrahim Dincer,et al.  Cycling degradation testing and analysis of a LiFePO4 battery at actual conditions , 2017 .

[92]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[93]  Hui Peng,et al.  Effects of Vibration on the Electrical Performance of Lithium-Ion Cells Based on Mathematical Statistics , 2017 .

[94]  Ali C. Kheirabadi,et al.  Fatty acids and related phase change materials for reliable thermal energy storage at moderate temperatures , 2017 .

[95]  N. Rahim,et al.  Recent progresses and achievements in photovoltaic-phase change material technology: A review with special treatment on photovoltaic thermal-phase change material systems , 2016 .

[96]  Mohammed Ghazal,et al.  Smart plugs: Perceived usefulness and satisfaction: Evidence from United Arab Emirates , 2016 .

[97]  Yves Dube,et al.  A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures , 2016 .

[98]  Zhiyong Liang,et al.  Overcharge failure investigation of lithium-ion batteries , 2015 .

[99]  A. Babapoor,et al.  Thermal management of a Li-ion battery using carbon fiber-PCM composites , 2015 .

[100]  R. K. Sharma,et al.  Developments in organic solid–liquid phase change materials and their applications in thermal energy storage , 2015 .

[101]  John A. Noël,et al.  Life cycle assessment of two biologically produced phase change materials and their related products , 2015, The International Journal of Life Cycle Assessment.

[102]  Bernard Sahut,et al.  Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery , 2014 .

[103]  G. Tan,et al.  A review of thermoelectric cooling: Materials, modeling and applications , 2014 .

[104]  N. Brandon,et al.  The effect of thermal gradients on the performance of lithium-ion batteries , 2014 .

[105]  Noel León,et al.  High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques , 2013 .

[106]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[107]  Xiaohui Wang,et al.  Three-dimensional thermal modeling of a lithium-ion battery pack , 2012 .

[108]  F. Bruno,et al.  Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems , 2012 .

[109]  Zhonghao Rao,et al.  A review of power battery thermal energy management , 2011 .

[110]  Ahmet Sarı,et al.  Preparation and characterization of fatty acid ester/building material composites for thermal energy storage in buildings , 2011 .

[111]  Shriram Santhanagopalan,et al.  Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales , 2011 .

[112]  Ahmet Alper Aydın,et al.  High-chain fatty acid esters of myristyl alcohol with odd carbon number: Novel organic phase change materials for thermal energy storage—2 , 2011 .

[113]  Bernard Bäker,et al.  Current density and state of charge inhomogeneities in Li-ion battery cells with LiFePO4 as cathode material due to temperature gradients , 2011 .

[114]  Chaoyang Wang,et al.  Cycling degradation of an automotive LiFePO4 lithium-ion battery , 2011 .

[115]  Kai Yang,et al.  Thermal behavior analysis of nickel/metal hydride battery during overcharging , 2010 .

[116]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[117]  J. Whitacre,et al.  Lithium Ion Batteries for Space Applications , 2007, 2007 IEEE Aerospace Conference.

[118]  J. Selman,et al.  Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation , 2005 .

[119]  M. A. Habib,et al.  The effect of temperature on capacity and power in cycled lithium ion batteries , 2005 .

[120]  Chester G. Motloch,et al.  A capacity and power fade study of Li-ion cells during life cycle testing , 2003 .

[121]  A. Sari.  Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications , 2003 .

[122]  Gan Ning,et al.  Capacity fade study of lithium-ion batteries cycled at high discharge rates , 2003 .

[123]  Kang Xu,et al.  Low temperature performance of graphite electrode in Li-ion cells , 2002 .

[124]  B. Popov,et al.  Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part I. Cycling performance , 2002 .

[125]  J. Shim,et al.  Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature , 2002 .

[126]  Mao-Sung Wu,et al.  Heat dissipation design for lithium-ion batteries , 2002 .

[127]  Hsiu-Ping Lin,et al.  Low temperature electrolytes for Li-ion PVDF cells , 2000 .

[128]  Ramesh R. Rao,et al.  Energy efficient battery management , 2000, Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064).

[129]  L. Vasiliev.  Heat pipe science and technology: A. Faghri, Taylor and Francis, 1995, 912 pp, 1-56032-383-3, Cloth 149.50 , 1996 .

[130]  D. Feldman,et al.  Low chain esters of stearic acid as phase change materials for thermal energy storage in buildings , 1995 .

[131]  A. Sayigh,et al.  Some fatty acids as phase-change thermal energy storage materials , 1994 .

[132]  M. Pathak,et al.  Thermal analysis of phase change material encapsulated li-ion battery pack using multi-scale multi-dimensional framework , 2023, Journal of Energy Storage.

[133]  H. Garmestani,et al.  The role of phase change materials in lithium-ion batteries: A brief review on current materials, thermal management systems, numerical methods, and experimental models , 2023, Journal of Energy Storage.

[134]  G. Molaeimanesh,et al.  Hybrid thermal management for achieving extremely uniform temperature distribution in a lithium battery module with phase change material and liquid cooling channels , 2022, Journal of Energy Storage.

[135]  Haoran Jiang,et al.  A hybrid battery thermal management system for electric vehicles under dynamic working conditions , 2021 .

[136]  Luisa F. Cabeza,et al.  Advances in thermal energy storage systems: methods and applications , 2021, Advances in Thermal Energy Storage Systems.

[137]  Davide Lauria,et al.  On-Line Estimation Assessment of Power Systems Inertia With High Penetration of Renewable Generation , 2020, IEEE Access.

[138]  Qingsong Wang,et al.  The effect of electrode design parameters on battery performance and optimization of electrode thickness based on the electrochemical–thermal coupling model , 2019, Sustainable Energy & Fuels.

[139]  Yong Li,et al.  Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures , 2018 .

[140]  Jianqiu Li,et al.  Investigation of Lithium Plating-Stripping Process in Li-Ion Batteries at Low Temperature Using an Electrochemical Model , 2018 .

[141]  S. Nada,et al.  Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment , 2015 .

[142]  Nicholas R. Jankowski,et al.  A review of phase change materials for vehicle component thermal buffering , 2014 .

[143]  Chaoyang Wang,et al.  Li-Ion Cell Operation at Low Temperatures , 2013 .

[144]  R. Spotnitz,et al.  Abuse behavior of high-power, lithium-ion cells , 2003 .

[145]  A. Pesaran.  Battery Thermal Management in EVs and HEVs : Issues and Solutions , 2001 .