A coupled approach for identification of nonlinear and compressible material models for soft tissue based on different experimental setups - Exemplified and detailed for lung parenchyma.

In this paper, a coupled inverse analysis is proposed to identify nonlinear compressible hyperelastic material models described by two sets of experiments. While the overall approach is applicable for different materials, here it will be presented for viable lung parenchyma. Characterizing the material properties of lung parenchyma is essential to describe and predict the mechanical behavior of the respiratory system in health and disease. During breathing and mechanical ventilation, lung parenchyma is mainly subjected to volumetric deformations along with isochoric and asymmetric deformations that occur especially in diseased heterogeneous lungs. Notwithstanding, most studies examine lung tissue in predominantly isochoric tension tests. In this paper, we investigate the volumetric material behavior as well as the isochoric deformations in two sets of experiments: namely, volume-pressure-change experiments (performed with 287 samples of 26 rats) and uniaxial tension tests (performed with 30 samples of 5 rats). Based on these sets of experiments, we propose a coupled inverse analysis, which simultaneously incorporates both measurement sets to optimize the material parameters. Accordingly, we determine a suitable material model using the experimental results of both sets of experiments in one coupled identification process. The identified strain energy function with the corresponding material parameters [Formula: see text] is validated to model both sets of experiments precisely. Hence, this constitutive model describes the complex volumetric and isochoric nonlinear material behavior of lung parenchyma. This derived material model can be used for nonlinear finite element simulations of lung parenchyma and will help to quantify the stresses and strains of lung tissue during spontaneous and artificial breathing; thus, allowing new insights into lung function and biology.

[1]  Y C Fung,et al.  Effect of temperature on the biaxial mechanics of excised lung parenchyma of the dog. , 1992, Journal of applied physiology.

[2]  R. Harris,et al.  Pressure-volume curves of the respiratory system. , 2005, Respiratory care.

[3]  Kenneth Levenberg A METHOD FOR THE SOLUTION OF CERTAIN NON – LINEAR PROBLEMS IN LEAST SQUARES , 1944 .

[4]  G. Christensen,et al.  Three-dimensional characterization of regional lung deformation. , 2011, Journal of biomechanics.

[5]  D. Marquardt An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[6]  Ivonne Sgura,et al.  Fitting hyperelastic models to experimental data , 2004 .

[7]  Jill P. Reese,et al.  Projected Pseudotransient Continuation , 2008, SIAM J. Numer. Anal..

[8]  P. Roughley,et al.  Effect of glycosaminoglycan degradation on lung tissue viscoelasticity. , 2001, American journal of physiology. Lung cellular and molecular physiology.

[9]  S V Dawson,et al.  Properties of lung parenchyma in distortion. , 1975, Journal of applied physiology.

[10]  G. C. Lee.,et al.  Isotropy and homogeneity of lung tissue deformation. , 1981, Journal of biomechanics.

[11]  W. Wall,et al.  Experimental characterization and model identification of the nonlinear compressible material behavior of lung parenchyma. , 2018, Journal of the mechanical behavior of biomedical materials.

[12]  M. Toshima,et al.  Three-dimensional architecture of elastin and collagen fiber networks in the human and rat lung. , 2004, Archives of histology and cytology.

[13]  J. D. Humphrey,et al.  Biomechanical Phenotyping of Central Arteries in Health and Disease: Advantages of and Methods for Murine Models , 2013, Annals of Biomedical Engineering.

[14]  Eric A Hoffman,et al.  Supine and prone differences in regional lung density and pleural pressure gradients in the human lung with constant shape. , 2009, Journal of applied physiology.

[15]  Wolfgang A. Wall,et al.  Computational modelling of the respiratory system: Discussion of coupled modelling approaches and two recent extensions , 2017 .

[16]  T A Wilson,et al.  Elastic constants of inflated lobes of dog lungs. , 1976, Journal of applied physiology.

[17]  Stéphane Avril,et al.  Novel Methodology for Characterizing Regional Variations in the Material Properties of Murine Aortas. , 2016, Journal of biomechanical engineering.

[18]  D. Stamenović,et al.  Biomechanics of the lung parenchyma: critical roles of collagen and mechanical forces. , 2005, Journal of applied physiology.

[19]  Béla Suki,et al.  Lung tissue mechanics as an emergent phenomenon. , 2011, Journal of applied physiology.

[20]  E. Vollmer,et al.  Characterisation of guinea pig precision-cut lung slices: comparison with human tissues , 2006, European Respiratory Journal.

[21]  Céline Grandmont,et al.  A tree‐parenchyma coupled model for lung ventilation simulation , 2017, International journal for numerical methods in biomedical engineering.

[22]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[23]  Douglas Cook,et al.  Unrealistic statistics: how average constitutive coefficients can produce non-physical results. , 2014, Journal of the mechanical behavior of biomedical materials.

[24]  J. Hildebrandt,et al.  Pressure-volume data of cat lung interpreted by a plastoelastic, linear viscoelastic model. , 1970, Journal of applied physiology.

[25]  Jason H. T. Bates,et al.  Influence of parenchymal heterogeneity on airway-parenchymal interdependence , 2013, Respiratory Physiology & Neurobiology.

[26]  Wolfgang A. Wall,et al.  Modeling the Mechanical Behavior of Lung Tissue at the Microlevel , 2009 .

[27]  Y C Fung,et al.  Measurement of the mechanical properties of the human lung tissue. , 1987, Journal of biomechanical engineering.

[28]  W A Wall,et al.  Material model of lung parenchyma based on living precision-cut lung slice testing. , 2011, Journal of the mechanical behavior of biomedical materials.

[29]  International consensus conferences in intensive care medicine. Ventilator-associated lung injury in ARDS. American Thoracic Society, European Society of Intensive Care Medicine, Societé de Réanimation Langue Française. , 1999, Intensive care medicine.

[30]  M. Matthay,et al.  The acute respiratory distress syndrome. , 1996, The New England journal of medicine.

[31]  S. Uhlig,et al.  Ventilation-induced lung injury. , 2011, Comprehensive Physiology.

[32]  Wolfgang A Wall,et al.  A novel two-layer, coupled finite element approach for modeling the nonlinear elastic and viscoelastic behavior of human erythrocytes , 2011, Biomechanics and modeling in mechanobiology.

[33]  Y C Fung,et al.  Collagen and elastin fibers in human pulmonary alveolar walls. , 1988, Journal of applied physiology.

[34]  S. Lai-Fook,et al.  Lung parenchyma described as a prestressed compressible material. , 1977, Journal of biomechanics.

[35]  Gerhard A. Holzapfel,et al.  Nonlinear Solid Mechanics: A Continuum Approach for Engineering Science , 2000 .

[36]  Hari Arora,et al.  On the behaviour of lung tissue under tension and compression , 2016, Scientific Reports.

[37]  D. Navajas,et al.  Dynamic viscoelastic nonlinearity of lung parenchymal tissue. , 1995, Journal of applied physiology.

[38]  Wolfgang A. Wall,et al.  Towards a comprehensive computational model for the respiratory system , 2010 .

[39]  D. Stamenović,et al.  Dynamic moduli of rabbit lung tissue and pigeon ligamentum propatagiale undergoing uniaxial cyclic loading. , 1994, Journal of applied physiology.

[40]  Vicente Grau,et al.  A poroelastic model coupled to a fluid network with applications in lung modelling , 2014, International journal for numerical methods in biomedical engineering.

[41]  S. Uhlig,et al.  Videomicroscopy of methacholine-induced contraction of individual airways in precision-cut lung slices. , 1996, The European respiratory journal.

[42]  Zoujun Dai,et al.  A model of lung parenchyma stress relaxation using fractional viscoelasticity. , 2015, Medical engineering & physics.

[43]  S. Rausch Computational and Experimental Modeling of Lung Parenchyma , 2012 .

[44]  Elastic properties of air- and liquid-filled lung parenchyma. , 1988, Journal of applied physiology.

[45]  Stéphane Avril,et al.  Material Parameter Identification and Inverse Problems in Soft Tissue Biomechanics. , 2017, Anticancer research.

[46]  Benjamin C. Weed,et al.  Experimental Evidence of Mechanical Isotropy in Porcine Lung Parenchyma , 2015, Materials.

[47]  R. Hyatt,et al.  Effects of age on elastic moduli of human lungs. , 2000, Journal of applied physiology.

[48]  J. Bates,et al.  A distributed nonlinear model of lung tissue elasticity. , 1997, Journal of applied physiology.

[49]  R. Hyatt,et al.  Static Behavior of the Respiratory System , 1987 .

[50]  Wei Huang,et al.  Mechanical properties of human lung parenchyma. , 2006, Biomedical sciences instrumentation.

[51]  Christian J. Roth,et al.  Fluid‐structure interaction including volumetric coupling with homogenised subdomains for modeling respiratory mechanics , 2017, International journal for numerical methods in biomedical engineering.

[52]  W A Wall,et al.  Numerical identification method for the non-linear viscoelastic compressible behavior of soft tissue using uniaxial tensile tests and image registration - application to rat lung parenchyma. , 2014, Journal of the mechanical behavior of biomedical materials.

[53]  M. Pinart,et al.  Dynamic nonlinearity of lung tissue: effects of strain amplitude and stress level. , 2011, Journal of applied physiology.

[54]  B. Suki,et al.  Dynamic properties of lung parenchyma: mechanical contributions of fiber network and interstitial cells. , 1997, Journal of applied physiology.

[55]  J B West,et al.  Elasticity of excised dog lung parenchyma. , 1978, Journal of applied physiology: respiratory, environmental and exercise physiology.

[56]  K. T. Ramesh,et al.  Mechanical properties of soft human tissues under dynamic loading. , 2007, Journal of biomechanics.

[57]  K. v. Neergaard,et al.  Neue Auffassungen über einen Grundbegriff der Atemmechanik , 1929 .