论文信息 - Anisotropic pattern transfer of fine resist features to silicon nitride via an intermediate titanium layer - 字舞流文

Anisotropic pattern transfer of fine resist features to silicon nitride via an intermediate titanium layer

J. Weaver | S. Murad | A. Midha

[1] D. Cumming,et al. Fabrication of 3 nm wires using 100 keV electron beam lithography and poly(methyl methacrylate) resist , 1996 .

[2] A. Madouri,et al. Fabrication of sub‐30 nm masks for x‐ray nanolithography , 1995 .

[3] Stella W. Pang,et al. HIGH ASPECT RATIO POLYIMIDE ETCHING USING AN OXYGEN PLASMA GENERATED BY ELECTRON CYCLOTRON RESONANCE SOURCE , 1994 .

[4] A. Wagner,et al. Resolution limits and process latitude of x‐ray mask fabrication , 1993 .

[5] Mark L. Schattenburg,et al. X-ray lithography from 500 to 30 nm: X-ray nanolithography , 1993, IBM J. Res. Dev..

[6] T. Wong,et al. Fabrication of sub‐20 nm trenches in silicon nitride using CHF3/O2 reactive ion etching and oblique metallization , 1992 .

[7] Francesco Fracassi,et al. Dry etching of Ti in chlorine containing feeds , 1992 .

[8] F. Ren,et al. Mask erosion during dry etching of deep features in III-V semiconductor structures , 1992 .

[9] P. Capezzuto,et al. Plasma etching of Ti in fluorine‐containing feeds , 1991 .

[10] S. Ingram. The influence of substrate topography on ion bombardment in plasma etching , 1990 .

[11] R. Buhrman,et al. Fabrication of thin‐film metal nanobridges , 1989 .

[12] G. Turban. Basic phenomena in reactive low pressure plasmas used for deposition and etching-current status , 1984 .