Heat transfer and flow structure in laminar and turbulent flows in a rectangular channel with longitudinal vortices

Heat transfer characteristics and flow structure in laminar and turbulent flows through a rectangular channel containing built-in vortex generators have been analyzed by means of solutions of the full Navier-Stokes and energy equations. The geometrical configuration of interest is representative of single element of a plate-fin cross-flow heat exchanger. Each winglet-pair induces longitudinal vortices behind it. These vortices swirl the flow around the axis parallel to the mainstream direction and strongly enhance the exchange of fluid between the wall and the core region which causes high heat transfer augmentation. A detailed evaluation of the performance parameters in the laminar flow regime with regard to the enhancement of heat transfer using winglet-type vortex generators has been accomplished in this study. It may be mentioned that for some special applications the fluid velocity becomes very high and one may encounter turbulent flows in plate-fin heat exchangers. In the present study, the predictions for turbulent flows have been made and an effort has been undertaken to compare the accuracy of the predictive procedure with well documented experiments of another research group. The computational results agree reasonably well with their experimental counterpart.

[1]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[2]  Martin Fiebig,et al.  Flow structure and heat transfer in a channel with multiple longitudinal vortex generators , 1992 .

[3]  T. V. Jones,et al.  HEAT TRANSFER ENHANCEMENT USING VORTEX GENERATORS , 1982 .

[4]  U. Ghia,et al.  High-Re solutions for incompressible flow using the Navier-Stokes equations and a multigrid method , 1982 .

[5]  M. Fiebig,et al.  Effects of longitudinal vortex generators on heat transfer and flow loss in turbulent channel flows , 1993 .

[6]  John K. Eaton,et al.  Heat Transfer Effects of a Longitudinal Vortex Embedded in a Turbulent Boundary Layer , 1984 .

[7]  Tetuya Kawamura,et al.  Computation of high Reynolds number flow around a circular cylinder with surface roughness , 1984 .

[8]  Gautam Biswas,et al.  Heat transfer enhancement in fin-tube heat exchangers by winglet type vortex generators , 1994 .

[9]  M. Fiebig,et al.  WING TYPE VORTEX GENERATORS FOR HEAT TRANSFER ENHANCEMENT , 1986 .

[10]  R. W. Davis,et al.  A numerical study of vortex shedding from rectangles , 1982, Journal of Fluid Mechanics.

[11]  Arthur E. Bergles,et al.  ENHANCEMENT OF HEAT TRANSFER , 1978 .

[12]  S. Shirayama.  Construction of modified third-order upwind schemes for stretched meshes , 1992 .

[13]  F. J. Edwards,et al.  THE IMPROVEMENT OF FORCED CONVECTION SURFACE HEAT TRANSFER USING SURFACE PROTRUSIONS IN THE FORM OF (A) CUBES AND (B) VORTEX GENERATORS , 1974 .

[14]  C. W. Hirt,et al.  SOLA: a numerical solution algorithm for transient fluid flows , 1975 .

[15]  R. Shah.  Laminar Flow Forced convection in ducts , 1978 .

[16]  C. W. Hirt,et al.  Calculating three-dimensional flows around structures and over rough terrain☆ , 1972 .

[17]  John K. Eaton,et al.  Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer , 1987 .

[18]  R. Shah,et al.  Handbook of single-phase convective heat transfer , 1987 .

[19]  Sandip Dutta,et al.  HEAT TRANSFER AND FLOW PAST A BACKSTEP WITH THE NONLINEAR k-∈ TURBULENCE MODEL AND THE MODIFIED k-∈ TURBULENCE MODEL , 1993 .

[20]  J. E. O'Brien,et al.  Low Reynolds number flow heat exchangers: Eds. S. Kakac, R. K. Shah and A. E. Bergles , 1984 .

[21]  W. Rohsenow,et al.  Handbook of heat transfer applications , 1985 .

[22]  Gautam Biswas,et al.  Heat transfer in a channel with built-in wing-type vortex generators , 1992 .

[23]  W. Nakayama.  Augmentation of Heat Transfer , 1987 .

[24]  Martin Fiebig,et al.  Structure of velocity and temperature fields in laminar channel flows with longitudinal vortex generators , 1989 .

[25]  F. Harlow,et al.  Numerical Calculation of Time‐Dependent Viscous Incompressible Flow of Fluid with Free Surface , 1965 .

[26]  B. P. Leonard,et al.  A stable and accurate convective modelling procedure based on quadratic upstream interpolation , 1990 .

[27]  Martin Fiebig,et al.  Heat transfer enhancement and drag by longitudinal vortex generators in channel flow , 1991 .