Evolution of microstructure and wear mechanism in laser clad Al0.5CoCrFeNiSi0.5Tix coatings in response to the Ti addition

[1]  Mengyao Zheng,et al.  Dry sliding wear behavior of additively manufactured CoCrWNixAly alloys , 2022, Wear.

[2]  Zhuanni Gao,et al.  Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding , 2022, Journal of Alloys and Compounds.

[3]  G. Jin,et al.  Microstructure evolution and properties of NiTiCrNbTax refractory high-entropy alloy coatings with variable Ta content , 2022, Journal of Alloys and Compounds.

[4]  Mengyao Zheng,et al.  In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding , 2021 .

[5]  T. Kulik,et al.  Oxidation Behavior of Alx(CoCrFeNi)100-x High-Entropy Alloys Under Thermal-Cycling Conditions , 2021, Oxidation of Metals.

[6]  Gang Wu,et al.  Microstructure and high-temperature properties of laser cladded AlCoCrFeNiTi0.5 high-entropy coating on Ti 6Al-4V alloy , 2021, Surface and Coatings Technology.

[7]  M. Izadi,et al.  Microstructural characterization and corrosion behavior of AlxCoCrFeNi high entropy alloys , 2021 .

[8]  Yongkang Liu,et al.  Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy , 2021 .

[9]  Dongyang Li,et al.  Effect of Ti on the wear behavior of AlCoCrFeNi high-entropy alloy during unidirectional and bi-directional sliding wear processes , 2021, Wear.

[10]  G. Jin,et al.  In-situ synthesis of nano-lamellar Ni1.5CrCoFe0.5Mo0.1Nbx eutectic high-entropy alloy coatings by laser cladding: Alloy design and microstructure evolution , 2021 .

[11]  Ming-Wei Wu,et al.  Effect of Ti addition on the sliding wear behavior of AlCrFeCoNi high-entropy alloy , 2020 .

[12]  Mengyao Zheng,et al.  The influence of columnar to equiaxed transition on deformation behavior of FeCoCrNiMn high entropy alloy fabricated by laser-based directed energy deposition , 2020 .

[13]  T. Mizoguchi,et al.  In situ observation of the dynamics in the middle stage of spinodal decomposition of a silicate glass via scanning transmission electron microscopy , 2020 .

[14]  B. Prakash,et al.  Dry sliding wear of nanostructured carbide-free bainitic steels – Effect of oxidation-dominated wear , 2020 .

[15]  A. B. Radwan,et al.  Aluminum nitride (AlN) reinforced electrodeposited Ni–B nanocomposite coatings , 2020 .

[16]  Yuhong Zhao,et al.  Microstructural evolution and mechanical properties of Al0.3CoCrFeNiSix high-entropy alloys containing coherent nanometer-scaled precipitates , 2020 .

[17]  Zhijia Zhang,et al.  Ti content effect on microstructure and mechanical properties of plasma-cladded CoCrFeMnNiTix high-entropy alloy coatings , 2020, Surface Topography: Metrology and Properties.

[18]  Hao Liu,et al.  Microstructure and Properties of AlCoCrFeNiSi High-Entropy Alloy Coating on AISI 304 Stainless Steel by Laser Cladding , 2020, Journal of Materials Engineering and Performance.

[19]  Hao Liu,et al.  Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding , 2019, Optics & Laser Technology.

[20]  Jinchen Wang,et al.  Microstructure characterization of AlCoCrFeNiTi high-entropy alloy coating produced by atmospheric plasma spraying , 2019, Materials Research Express.

[21]  Lianbo Wang,et al.  Influences of Al and Ti particles on microstructure, internal stress and property of Ni composite coatings , 2019, Journal of Alloys and Compounds.

[22]  C. Sun,et al.  Preparation and high temperature tribological properties of laser in-situ synthesized self-lubricating composite coatings containing metal sulfides on Ti6Al4V alloy , 2019, Applied Surface Science.

[23]  A. I. Mtz-Enríquez,et al.  Wear resistance of TiN or AlTiN nanostructured Ni-based hardfacing by PTA under pin on disc test , 2019, Wear.

[24]  Hao Liu,et al.  Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding , 2019, Surface and Coatings Technology.

[25]  Z. Wang,et al.  The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys , 2019, Vacuum.

[26]  谢敏 Xie Min,et al.  Effect of TiN Content on Microstructure and Wear Resistance of Ti-Based Composites Produced by Selective Laser Melting , 2019 .

[27]  H. Toenshoff.  Wear Mechanisms , 2019, CIRP Encyclopedia of Production Engineering.

[28]  M. Zhang,et al.  Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy , 2018, Journal of Alloys and Compounds.

[29]  Nannan Zhang,et al.  Phase evolution and wear mechanism of AlCoCrFeNiSix high-entropy alloys produced by arc melting , 2018, Materials Research Express.

[30]  Yang Li,et al.  High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating , 2018, Applied Surface Science.

[31]  Li Wenzheng,et al.  Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel , 2018 .

[32]  W. Xiong,et al.  Microstructural Evolution of AlCoCrFeNiSi High-Entropy Alloy Powder during Mechanical Alloying and Its Coating Performance , 2018, Materials.

[33]  Xing-wu Qiu,et al.  Effect of Ti content on structure and properties of Al2CrFeNiCoCuTix high-entropy alloy coatings , 2014 .

[34]  J. Yeh,et al.  Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys , 2012 .

[35]  M. Wimmer,et al.  The tribological difference between biomedical steels and CoCrMo-alloys. , 2012, Journal of the mechanical behavior of biomedical materials.

[36]  C. Liu,et al.  Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys , 2011 .

[37]  Xiaoqiang Hu,et al.  Mechanisms of Solidification Structure Improvement of Ultra Pure 17 wt% Cr Ferritic Stainless Steel by Ti, Nb Addition , 2011 .

[38]  Wenjin Liu,et al.  The Property Research on High-entropy Alloy AlxFeCoNiCuCr Coating by Laser Cladding , 2011 .

[39]  M. Wimmer,et al.  Wear mechanisms in metal‐on‐metal bearings: The importance of tribochemical reaction layers , 2009, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[40]  M. Olsson,et al.  Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions , 2009 .

[41]  Yves Berthier,et al.  Wear modeling and the third body concept , 2007 .

[42]  Jien-Wei Yeh,et al.  Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content , 2006 .

[43]  D. Stefanescu.  Microstructure Evolution during the Solidification of Steel , 2006 .

[44]  Jie Shen,et al.  Morphological evolution during phase separation and coarsening with strong inhomogeneous elasticity , 2001 .

[45]  R. Trivedi,et al.  Rapid solidification processing and microstructure formation , 1994 .

[46]  T. Quinn.  Review of oxidational wear: Part I: The origins of oxidational wear , 1983 .