State Estimation of Internal Combustion Engine Based on Mathematical Model

This research aims to estimate an engine torque, an in-cylinder pressure and an amount of intake in a cylinder accurately by applying a crank-shaft angle. The appropriate discretization methods of an engine model are verified to improve the estimation accuracy. In addition, an air intake system model is added to the engine model consisting of piston-crank dynamics and combustion process. These states are estimated applying the Unscented Kalman Filter based on the engine model. An effectiveness of the appropriate discretization method and an extended model were verified through comparing the estimated results and the measured data.

[1]  Junichi Furuya,et al.  Estimation of Engine Torque and Cylinder Pressure Index Based on Crankshaft Rotation Measurement , 2013 .

[2]  M. Yamakita,et al.  Comparative study of simultaneous parameter-state estimations , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..

[3]  Chi-Wang Shu,et al.  Strong Stability-Preserving High-Order Time Discretization Methods , 2001, SIAM Rev..

[4]  Cem Sorusbay,et al.  Double-Wiebe function: An approach for single-zone HCCI engine modeling , 2008 .

[5]  T. Iwamoto,et al.  Combustion torque estimation utilizing smoothed implicit derivatives from crank sensor samples , 2009, 2009 ICCAS-SICE.

[6]  Xinghuo Yu,et al.  ZOH discretization effect on single-input sliding mode control systems with matched uncertainties , 2009, Autom..

[7]  Hidenori Kimura,et al.  Estimation of Air Mass into Cylinder with Extended Kalman Filter for the Control of Injected SI Engine , 1997 .

[8]  T. McKelvey,et al.  A system inversion approach on a crankshaft of an internal combustion engine , 2004, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601).

[9]  M. Schultalbers,et al.  Multiple sliding surface control of idle engine speed and torque reserve with load torque estimation , 2008, 2008 International Workshop on Variable Structure Systems.

[10]  W. Blajer,et al.  A unified approach to the modelling of holonomic and nonholonomic mechanical systems , 1996 .

[11]  Masami Iwase,et al.  UKF-based estimation of indicated torque for IC engines utilizing nonlinear two-inertia model , 2012, 2012 IEEE 51st IEEE Conference on Decision and Control (CDC).

[13]  M. Ogawa,et al.  Engine control education system , 2008, 2008 SICE Annual Conference.

[14]  Masami Iwase,et al.  Combustion process estimation in cylinders based on an integrated engine model of the wiebe function and a piston-crank mechanism , 2015, 2015 54th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE).