A State-of-the-Art Review of Compact Vapor Compression Refrigeration Systems and Their Applications

We present a critical review of the literature on the fundamentals, design, and application aspects of compact and miniature mechanical vapor compression refrigeration systems. Examples of such systems are those envisaged for electronics and personal cooling. In comparison to other refrigeration technologies (e.g., solid-state), vapor compression enables the attainment of low evaporating temperatures while maintaining a large cooling capacity per unit power input to the system. Over the past decade, there have been a significant number of studies devoted to the miniaturization of system components, with the most critical being the compressor. When compared with competing cooling technologies, such as flow boiling in microchannels, jet impingement, and spray cooling, refrigeration is the only one capable of lowering the junction temperature to values below the ambient temperature. The combination of vapor compression refrigeration with the aforementioned technologies is also possible, necessary, and beneficial, since it increases greatly the potential for reducing the system size. For each main application, this paper sheds some light on the thermodynamic and thermal aspects of the cooling cycle and on recent developments regarding its components (compressor, heat exchangers, and expansion device). Whenever appropriate, issues and challenges associated with the different cycle designs are addressed. An overview of the ongoing efforts in competing technologies is also presented.

[1]  Suwat Trutassanawin,et al.  NUMERICAL ANALYSIS OF A MINIATURE-SCALE REFRIGERATION SYSTEM (MSRS) FOR ELECTRONICS COOLING , 2004 .

[2]  J. Thome,et al.  State of the Art of High Heat Flux Cooling Technologies , 2007 .

[3]  D. Copeland,et al.  Power and temperature requirements for refrigerated systems , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[4]  John T. Wen,et al.  Optimization of Refrigeration Systems for High-Heat-Flux Microelectronics , 2008 .

[5]  Jackson Braz Marcinichen,et al.  Cooling of microprocessors with micro-evaporation: A novel two-phase cooling cycle , 2010 .

[6]  L. R. Grryll,et al.  Development of a man-portable microclimate adsorption cooling device , 1997, IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203).

[7]  Sangkwon Jeong.  How difficult is it to make a micro refrigerator , 2004 .

[8]  M. Kevin Drost,et al.  Miniaturization technologies applied to energy systems , 1997 .

[9]  A. Heydari.  Miniature vapor compression refrigeration systems for active cooling of high performance computers , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[10]  Roger R. Schmidt,et al.  Effect of the thermostatic expansion valve characteristics on the stability of a refrigeration system , 2003 .

[11]  S. M. Ghiaasiaan.  TWO-PHASE FLOW, BOILING AND CONDENSATION IN CONVENTIONAL AND MINIATURE SYSTEMS , 2007 .

[12]  W. Zhang,et al.  Correlation for flow boiling heat transfer in mini-channels , 2004 .

[13]  Wen Wang,et al.  Characteristic of a Miniature Linear Compressor , 2010 .

[14]  John R. Thome,et al.  An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels , 2006 .

[15]  M. Mochizuki,et al.  Small scale refrigeration system for electronics cooling within a notebook computer , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[16]  Yogendra Joshi,et al.  Compact, Low Temperature Refrigeration of Microprocessors , 2006 .

[17]  Craig R. Bradshaw,et al.  A Miniature-Scale Linear Compressor for Electronics Cooling. , 2011 .

[18]  T. Shedd.  Next Generation Spray Cooling: High Heat Flux Management in Compact Spaces , 2007 .

[19]  John R. Thome,et al.  Heat Transfer Model for Evaporation in Microchannels, Part I: Presentation of the Model , 2004 .

[20]  Suresh V. Garimella,et al.  Dynamic analysis of an electrostatic compressor , 2010 .

[21]  John T. Wen,et al.  Dynamic Modeling of Refrigeration Cycle for Electronics Cooling , 2008 .

[22]  Suresh V. Garimella,et al.  Thermal Challenges in Next-Generation Electronic Systems , 2003, IEEE Transactions on Components and Packaging Technologies.

[23]  V. Chiriac,et al.  An Alternative Method for the Cooling of Power Microelectronics Using Classical Refrigeration , 2007, 2007 International Conference on Thermal Issues in Emerging Technologies: Theory and Application.

[24]  Suresh V. Garimella,et al.  Optimization of electrostatically actuated miniature compressors for electronics cooling , 2009 .

[25]  C. Chao,et al.  Study of a micro absorption heat pump system , 2008 .

[26]  Jeffrey M. Gordon,et al.  The electro-adsorption chiller: a miniaturized cooling cycle with applications to micro-electronics , 2002 .

[27]  S. Novotny,et al.  A High Performance Linear Compressor For CPU Cooling , 2002 .

[28]  A. G. Agwu Nnanna,et al.  Application of refrigeration system in electronics cooling , 2006 .

[29]  H. Lee,et al.  Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios , 2001 .

[30]  Louis C. Chow,et al.  DESIGN AND ANALYSIS OF A MINIATURE RECIPROCATING COMPRESSOR DRIVEN BY A COMB DRIVE , 2000 .

[31]  Predrag Stojan Hrnjak,et al.  Integrated Mesoscopic Cooler Circuits (IMCCs) , 1999, Advanced Energy Systems.

[32]  S. Kandlikar.  Chapter 3 – Single-phase liquid flow in minichannels and microchannels , 2006 .

[33]  K. Drost.  Mesoscopic Heat-Actuated Heat Pump Development , 1999, Advanced Energy Systems.

[34]  Suresh V. Garimella,et al.  Experimental Evaluation of a Miniature Rotary Compressor for Application in Electronics Cooling , 2008 .

[35]  Y Epstein,et al.  Comparison between different auxiliary cooling devices in a severe hot/dry climate. , 1986, Ergonomics.

[36]  Roger R. Schmidt,et al.  High-end server low-temperature cooling , 2002, IBM J. Res. Dev..

[37]  Satish G. Kandlikar,et al.  Fundamental issues related to flow boiling in minichannels and microchannels , 2002 .

[38]  C. Coggins.  Single- and Multiple-Stage Cascaded Vapor Compression Refrigeration for Electronics Cooling , 2007 .

[39]  A. T. Prata,et al.  Mini-channel evaporator/heat pipe assembly for a chip cooling vapor compression refrigeration system , 2010 .

[40]  Satish G. Kandlikar,et al.  Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal , 2007 .

[41]  Dereje Agonafer,et al.  Effect of the thermostatic expansion valve characteristics on the stability of a refrigeration system-Part I , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[42]  Patrick E. Phelan,et al.  Current and future miniature refrigeration cooling technologies for high power microelectronics , 2001, Seventeenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.01CH37189).

[43]  J. Thome.  Boiling in microchannels: a review of experiment and theory , 2004 .

[44]  Savvas A. Tassou,et al.  A review of emerging technologies for food refrigeration applications , 2010 .

[45]  Muhammad M. Rahman.  Analysis and Design of an Air-Cycle Microclimate Cooling Device , 1996 .

[46]  Augusto Jose Pereira Zimmermann,et al.  Miniature Vapor Compression System , 2008 .

[47]  S.V. Garimella,et al.  Experimental Investigation of a Miniature-Scale Refrigeration System for Electronics Cooling , 2006, IEEE Transactions on Components and Packaging Technologies.

[48]  J. Swanson,et al.  Designing a mesoscale vapor-compression refrigerator for cooling high-power microelectronics , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[49]  John R. Thome,et al.  Heat Transfer Model for Evaporation in Microchannels, Part II: Comparison with the Database , 2004 .

[50]  Satish G. Kandlikar,et al.  High Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities , 2005 .

[51]  I. Mudawar,et al.  Flow boiling heat transfer in two-phase micro-channel heat sinks––I. Experimental investigation and assessment of correlation methods , 2003 .

[52]  John T. Wen,et al.  Experimental identification of evaporator dynamics for vapor compression refrigeration cycle during phase transition , 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[53]  Andrei G. Fedorov,et al.  Experimental Investigation of Compact Evaporators for Ultralow Temperature Refrigeration of Microprocessors , 2007 .

[54]  Louis C. Chow,et al.  COMPONENT FABRICATION AND TESTING FOR A MESO-SCALE REFRIGERATOR , 1999 .

[55]  Srinivas Garimella,et al.  Wearable Engine-Driven Vapor-Compression Cooling System for Elevated Ambients , 2007 .

[56]  Stéphane Colin,et al.  Heat Transfer and Fluid Flow in Minichannels and Microchannels , 2005 .

[57]  S. Kandlikar,et al.  An Extension of the Flow Boiling Correlation to Transition, Laminar, and Deep Laminar Flows in Minichannels and Microchannels , 2004, Proceeding of Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003.

[58]  Yuting Wu,et al.  Development and experimental investigation of a miniature-scale refrigeration system , 2010 .

[59]  Cullen E. Bash,et al.  Acoustic compression for the thermal management of multi-load electronic systems , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).