Pyroelectric harvesters use temperature fluctuations to generate electrical outputs. Solar radiation and waste heat are rich energy sources that can be harvested. Pyroelectric energy converters offer a novel and direct energy-conversion technology by transforming time-dependent temperatures directly into electricity. Moreover, the great challenge for pyroelectric energy harvesting lies in finding promising temperature variations or an alternating thermal loading in real situations. Hence, in this article, a novel pyroelectric harvester integrating solar radiation with wind power by the pyroelectric effect is proposed. Solar radiation is a thermal source, and wind is a dynamic potential. A disk generator is used for harvesting wind power. A mechanism is considered to convert the rotary energy of the disk generator to drive a shutter for generating temperature variations in pyroelectric cells using a planetary gear system. The optimal period of the pyroelectric cells is 35 s to harvest the stored energy, about 70 μJ, while the rotary velocity of the disk generator is about 31 RPM and the wind speed is about 1 m/s. In this state, the stored energy acquired from the pyroelectric harvester is about 75% more than that from the disk generator. Although the generated energy of the proposed pyroelectric harvester is less than that of the disk generator, the pyroelectric harvester plays a complementary role when the disk generator is inactive in situations of low wind speed.
[1]
Laurent Pilon,et al.
Pyroelectric waste heat energy harvesting using heat conduction
,
2012
.
[2]
Qi Zhang,et al.
Solar micro-energy harvesting with pyroelectric effect and wind flow
,
2011
.
[3]
Chun-Ching Hsiao,et al.
Improvement of Pyroelectric Cells for Thermal Energy Harvesting
,
2012,
Sensors.
[4]
Roger W. Whatmore,et al.
Pyroelectric devices and materials
,
1986
.
[5]
Chi-Yuan Lee,et al.
Temperature Field Analysis for PZT Pyroelectric Cells for Thermal Energy Harvesting
,
2011,
Sensors.
[6]
Laurent Pilon,et al.
Pyroelectric energy converter using co-polymer P(VDF-TrFE) and Olsen cycle for waste heat energy harvesting
,
2010
.
[7]
D. Guyomar,et al.
Pyroelectric energy conversion: Optimization principles
,
2008,
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[8]
V. Ferrari,et al.
Thermal energy harvesting through pyroelectricity
,
2010
.
[9]
Roger W. Whatmore,et al.
Pyroelectric response of lead zirconate titanate thin films on silicon: Effect of thermal stresses
,
2013
.
[10]
Chun-Ching Hsiao,et al.
Improving Pyroelectric Energy Harvesting Using a Sandblast Etching Technique
,
2013,
Sensors.