Design methodology of a non-invasive sensor to measure the current of the output capacitor for a very fast non-linear control

The combination of non-linear control and linear control proposed in [1] has a very fast transient response (voltage step from 1 V to 1.5 V in 2 ¿s). In order to achieve this fast transient response the non-linear scheme is based on measuring the current of the output capacitor of a Buck converter. The design of this current sensor is complex due to parasitic effects such as component tolerances (bandwidth and dc gain of the Op-Amp), aging, temperature variation, etc. A design methodology for this current sensor is proposed regarding all these effects. The sensing circuit is designed to mirror the actual capacitor current with a trans-impedance amplifier by matching phase and scaling impedances of the RLC network (C, ESR and ESL of the output capacitor). The proposed methodology has been validated by means of a buck converter switching at 5 MHz. Experimental results validate that the current sensor behaves appropriately under voltage and load steps.

[1]  Henry Shu-Hung Chung,et al.  Dynamic hysteresis band control of the buck converter with fast transient response , 2005, IEEE Transactions on Circuits and Systems II: Express Briefs.

[2]  D. Biel,et al.  Optimum dynamic performance of a buck converter , 1996, 1996 IEEE International Symposium on Circuits and Systems. Circuits and Systems Connecting the World. ISCAS 96.

[3]  J.A. Cobos,et al.  Design methodology for dynamic voltage scaling in the buck converter , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[4]  J.A. Cobos,et al.  Design concepts and guidelines for VRMs from a power stage perspective , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[5]  V. Yousefzadeh,et al.  Proximate Time-Optimal Digital Control for Synchronous Buck DC–DC Converters , 2008, IEEE Transactions on Power Electronics.

[6]  Yan-Fei Liu,et al.  Novel Digital Controller Improves Dynamic Response and Simplifies Design Process of Voltage Regulator Module , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[7]  G. Schuellein,et al.  Current sharing of redundant synchronous buck regulators powering high performance microprocessors using the V/sup 2/ control method , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[8]  V. Yousefzadeh,et al.  Nonlinear digital PID controller for DC-DC converters , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[9]  A. Barrado,et al.  Fast transient response in hybrid sources with combined linear-non-linear control , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[10]  Yan-Fei Liu,et al.  An Optimal Control Method for Buck ConvertersUsing a Practical Capacitor ChargeBalance Technique , 2008, IEEE Transactions on Power Electronics.

[11]  J.A. Cobos,et al.  Nonlinear digital control breaks bandwidth limitations , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[12]  G.A. Rincon-Mora,et al.  Current-sensing techniques for DC-DC converters , 2002, The 2002 45th Midwest Symposium on Circuits and Systems, 2002. MWSCAS-2002..

[13]  R. Redl,et al.  Optimizing the load transient response of the buck converter , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[14]  S. K. Changchien,et al.  Fast response DC/DC converter with transient suppression circuit , 2006 .

[15]  J. Pleite,et al.  New DC/DC converter with low output voltage and fast transient response , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[16]  A. Prodic,et al.  Continuous-Time Digital Controller for High-Frequency DC-DC Converters , 2008, IEEE Transactions on Power Electronics.

[17]  M. Orabi,et al.  Compensation Circuit Design Considerations for high Frequency DC/DC Buck Converters with Ceramic Output Capacitors , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[18]  J.A. Cobos,et al.  Analysis of the buck converter for scaling the supply voltage of digital circuits , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[19]  O. Garcia,et al.  A very fast control based on hysteresis of the Cout current with a frequency loop to operate at constant frequency , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[20]  W. Huang.  A new control for multi-phase buck converter with fast transient response , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[21]  Peng Xu,et al.  Investigation of candidate VRM topologies for future microprocessors , 2000 .

[22]  S. Saggini,et al.  Time optimal, parameters-insensitive digital controller for DC-DC buck converters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[23]  Haitao Hu,et al.  Nonlinear Control for Improved Dynamic Response of Digitally Controlled DC-DC Converters , 2006 .