Improved test setup for MEMS mechanical strength investigations and fabrication process qualification

The mechanical stability of silicon MEMS dies is strongly influenced by the microfabrication processes, especially grinding, dicing and etching, which leave characteristic damage (defects, cracks, dislocations…) in the substrate material. Specially designed mechanical tests are used to assess the resistance of micro-structures to monotonic and cyclic loading. We report on the development progress of a micromechanical test bench for reliability assessment of microstructures in 2-, 3- and 4-point bending configurations. Strain distributions and defects in micron-sized silicon devices can be investigated by in-situ testing in combination with high-resolution x-ray diffraction measurements for experimentally assessing the strain distribution.

[1]  O. Paul,et al.  A prediction scheme of the static fracture strength of MEMS structures based on the characterization of damage distribution on a processed surface , 2013 .

[2]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[3]  Markus Apel,et al.  Simulation of mechanical stress during bending tests for crystalline wafers , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[4]  Ming-Yi Tsai,et al.  Investigation of thermomechanical behaviors of flip chip BGA packages during manufacturing process and thermal cycling , 2004, IEEE Transactions on Components and Packaging Technologies.

[5]  M. Tsai,et al.  Testing and Evaluation of Silicon Die Strength , 2007, IEEE Transactions on Electronics Packaging Manufacturing.

[6]  Die cracking in flip chip assemblies , 1998, 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206).

[7]  Ajay Kumar,et al.  Die singulation technologies for advanced packaging: A critical review , 2012 .

[8]  Matthias Steiert,et al.  New probabilistic reliability model describing the risk of chip fracture in the chip-on-board technology , 2012, 2012 4th Electronic System-Integration Technology Conference.

[9]  Tien-Yu Tom Lee,et al.  An overview of experimental methodologies and their applications for die strength measurement , 2003 .

[10]  Roberto Ballarini,et al.  An argument for proof testing brittle microsystems in high-reliability applications , 2008 .

[11]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[12]  Seung-Hyun Chae,et al.  Effect of Dicing Technique on the Fracture Strength of Si Dies With Emphasis on Multimodal Failure Distribution , 2010, IEEE Transactions on Device and Materials Reliability.

[13]  M. John Matthewson,et al.  A Novel Four-Point Bend Test for Strength Measurement of Optical Fibers and Thin , 1996 .

[14]  Karlheinz Bock,et al.  Investigations of the influence of dicing techniques on the strength properties of thin silicon , 2007, Microelectron. Reliab..

[15]  R. S. Gates,et al.  Etching Process Effects on Surface Structure, Fracture Strength, and Reliability of Single-Crystal Silicon Theta-Like Specimens , 2013, Journal of Microelectromechanical Systems.