Chemical process route selection based upon the potential toxic impact on the aquatic, terrestrial and atmospheric environments

Abstract This paper proposes a method to estimate the inherent environmental friendliness of a chemical process plant by considering the potential toxicity impact on the aquatic, terrestrial and atmospheric environments. A worst-case scenario of a total loss of containment in the plant is assumed. The method proposed by [Gunasekera, M.Y., Edwards, D.W. (2003). Estimating the environmental impact of catastrophic chemical releases to the atomosphere: an index method for ranking alternative chemical process routes. Trans. IChemE., Part B, Process Safety and Environmental Protection, 81(B6), 463–474] for determining the inherent atmospheric environmental friendliness of a chemical plant is combined with the method proposed by [Cave, S.R., Edwards, D.W. (1997). Chemical process route selection based on assessment of inherent environmental hazard. Computers Chem. Engng., 21, S965–S970], which estimates the inherent friendliness to the aquatic and terrestrial environments. Application of this method to six routes to produce methyl methacrylate shows that the acetone cyanohydrin based route is potentially the least inherently environmentally friendly. The highest potential hazard is observed in the aquatic environment due to the chemicals associated with the acetone cyanohydrin route.

[1]  Reinout Heijungs,et al.  A proposal for the classification of toxic substances within the framework of life cycle assessment of products , 1993 .

[2]  J. Devillers,et al.  Practical applications of quantitative structure-activity relationships (QSAR) in environmental chemistry and toxicology , 1990 .

[3]  Antonio Di Guardo,et al.  Toxics release inventories : opportunities for improved presentation and interpretation , 1996 .

[4]  D. W. Edwards,et al.  Chemical process route selection based on assessment of inherent environmental hazard , 1997 .

[5]  H. Bohnenblust,et al.  A methodology for assessing catastropic damage to the population and environment: A quantitative multi‐attribute approach for risk analysis based on fuzzy set theory , 1994 .

[6]  K. Hungerbühler,et al.  Assessing Safety, Health, and Environmental Impact Early during Process Development , 2000 .

[7]  Duncan Lawrence,et al.  Quantifying inherent safety of chemical process routes , 1996 .

[8]  Vulnerability analysis for airborne release of extremely hazardous substances , 1990 .

[9]  Barry Crittenden,et al.  Quantitative environmental impact analysis for clean design , 1996 .

[10]  D. W. Edwards,et al.  Estimating the Environmental Impact of Catastrophic Chemical Releases to the Atmosphere: An Index Method for Ranking Alternative Chemical Process Routes , 2003 .

[11]  M. Allaby,et al.  Dictionary of the Environment. , 1985 .

[12]  A. Wilday,et al.  Index method for cost-effective assessment of risk to the environment from accidental releases , 1998 .

[13]  Daniel A. Crowl,et al.  Chemical Process Safety: Fundamentals with Applications , 2001 .

[14]  V. C. Marshall.  Major Chemical Hazards , 1987 .

[15]  Chris Hendrickson,et al.  Toxic Emissions Indices for Green Design and Inventory , 1995 .