Design of an adjustable-stiffness spring: Mathematical modeling and simulation, fabrication and experimental validation

Abstract An adjustable-stiffness actuator composed of two antagonistic non-linear springs is proposed in this paper. The elastic device consists of two pairs of leaf springs working in bending conditions under large displacements. Owing to this geometric non-linearity, the global stiffness of the actuator can be adjusted by modifying the shape of the leaf springs. A mathematical model has been developed in order to predict the mechanical behavior of our proposal. The non-linear differential equation derived from the model is solved, obtaining large stiffness variations. A prototype of the actuator was fabricated and tested for different load cases. Experimental results were compared with numerical simulations for model verification, showing excellent agreement for a wide range of work.

[1]  Tad McGeer,et al.  Passive Dynamic Walking , 1990, Int. J. Robotics Res..

[2]  Donald Russell,et al.  Implementation of variable joint stiffness through antagonistic actuation using rolamite springs , 1999 .

[3]  Joel E. Chestnutt,et al.  The Actuator With Mechanically Adjustable Series Compliance , 2010, IEEE Transactions on Robotics.

[4]  Stephen P. DeWeerth,et al.  Biologically Inspired Joint Stiffness Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[5]  Russ Tedrake,et al.  Efficient Bipedal Robots Based on Passive-Dynamic Walkers , 2005, Science.

[6]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation , 1984, 1984 American Control Conference.

[7]  P. Q. Zhang,et al.  Application of dynamic vibration absorbers in floating raft system , 2010 .

[8]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[9]  Michael J. Brennan.  Some recent developments in adaptive tuned vibration absorbers/neutralisers , 2006 .

[10]  A. Sano,et al.  Adaptive feedforward control algorithms for active vibration control of tall structures , 1997, Proceedings of the 1997 IEEE International Conference on Control Applications.

[11]  K. Koganezawa,et al.  Stiffness and Angle Control of Antagonistially driven joint , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[12]  Shigeki Sugano,et al.  Design and development of a new robot joint using a mechanical impedance adjuster , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[13]  Angel Gaspar Gonzalez-Rodriguez,et al.  Design and validation of a novel actuator with adaptable compliance for application in human-like robotics , 2009, Ind. Robot.

[14]  P. Walsh,et al.  A variable stiffness vibration absorber for minimization of transient vibrations , 1992 .

[15]  H. F. Schulte.  The characteristics of the McKibben artificial muscle , 1961 .

[16]  Bram Vanderborght,et al.  MACCEPA: the mechanically adjustable compliance and controllable equilibrium position actuator for 'controlled passive walking' , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[17]  Shigeki Sugano,et al.  Development of an anthropomorphic force-controlled manipulator WAM-10 , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.

[18]  Shigeki Sugano,et al.  Force Control Of The Robot Finger Joint Equipped With Mechanical Compliance Adjuster , 1992, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.