Semi-Quantitative Laser-Induced Breakdown Spectroscopy for Analysis of Mineral Drill Core

An investigation is reported in the use of time-resolved laser-induced breakdown spectroscopy (LIBS) for mineral assaying applications. LIBS has potential for the rapid on-line determination of the major and minor constituents of mineral drill core samples. In this work a Q-switched Nd:YAG laser is used to test as-received lengths of drill core, with remote LIBS signal acquisition via a bare optical fiber bundle coupled to a spectrometer. A novel normalization scheme, based on integrating the total plasma emission, is demonstrated as a method for correction of signal variations due to the uneven surface geometry of rock. Averaged intensities of atomic emission for the elements Cr, Cu, Fe, Mn, and Ni show good linear correlations, with coefficients of R2 = 0.92–0.99, against laboratory assay values. Limitations in the comparison of the results of surface analysis to bulk compositions are discussed, with emphasis on mining applications of LIBS.

[1]  The Relationship of Spectral Line Intensity to the Weight of Sample Vaporized with the Laser Microprobe , 1973 .

[2]  G. L. Paul,et al.  Quantitative Elemental Analysis of Iron Ore by Laser-Induced Breakdown Spectroscopy , 1991 .

[3]  David A. Cremers,et al.  The Analysis of Metals at a Distance Using Laser-Induced Breakdown Spectroscopy , 1987 .

[4]  D. Cremers,et al.  Matrix Effects in the Detection of Pb and Ba in Soils Using Laser-Induced Breakdown Spectroscopy , 1996 .

[5]  Vahid Majidi,et al.  Spectroscopic Applications of Laser-Induced Plasmas , 1992 .

[6]  Kay Niemax,et al.  Basic investigations for laser microanalysis: I. Optical emission spectrometry of laser-produced sample plumes , 1989 .

[7]  J. A. Aguilera,et al.  Determination of Carbon Content in Molten Steel Using Laser-Induced Breakdown Spectroscopy , 1993 .

[8]  George S. Koch,et al.  Statistical Analysis of Geological Data , 1981 .

[9]  C. Fotakis,et al.  On-Line Monitoring of Laser Cleaning of Limestone by Laser-Induced Breakdown Spectroscopy and Laser-Induced Fluorescence , 1997 .

[10]  A. Wokaun,et al.  Element Identification on the Surface of Inorganic Solids by Excimer Laser-Induced Emission Spectroscopy , 1992 .

[11]  Andrew V. Pakhomov,et al.  Laser-Induced Breakdown Spectroscopy for Detection of Lead in Concrete , 1996 .

[12]  J. Maxwell.  The laser as a tool in mineral identification , 1963 .

[13]  J. D. Winefordner,et al.  Spatial and Temporal Dependence of Lead Emission in Laser-Induced Breakdown Spectroscopy , 1997 .

[14]  J. D. Winefordner,et al.  Variables Influencing the Precision of Laser-Induced Breakdown Spectroscopy Measurements , 1998 .

[15]  Paolo Cielo,et al.  Quantitative Analysis of Aluminum Alloys by Laser-Induced Breakdown Spectroscopy and Plasma Characterization , 1995 .

[16]  Leon J. Radziemski,et al.  Time-resolved laser-induced breakdown spectrometry of aerosols , 1983 .

[17]  D. E. Kim,et al.  Quantitative Analysis of Aluminum Impurities in Zinc Alloy by Laser-Induced Breakdown Spectroscopy , 1997 .

[18]  Demetrios Anglos,et al.  Laser Diagnostics of Painted Artworks: Laser-Induced Breakdown Spectroscopy in Pigment Identification , 1997 .

[19]  G. L. Paul,et al.  Time-Resolved Laser-Induced Breakdown Spectroscopy of Iron Ore , 1990 .

[20]  R. Russo,et al.  Temperature and Emission Spatial Profiles of Laser-Induced Plasmas during Ablation Using Time-Integrated Emission Spectroscopy , 1995 .

[21]  D. Cremers,et al.  Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy , 1996 .