Realistic end-to-end simulation of the optoelectronic links and comparison with the electrical interconnections for system-on-chip applications

A detailed comparison of optoelectronic versus electrical interconnections for system-on-chip applications is performed in terms of signal latency and power consumption. Realistic end-to-end models of both interconnection schemes are employed in order to evaluate critical performance parameters. A variety of electrical and optoelectronic interconnection configurations are implemented and simulated using accurate optical device and electronic circuit models integrated under an integrated circuit (IC) design computer-aided design tool. Two commercial complementary metal-oxide-semiconductor (CMOS) technologies (0.8 /spl mu/m and 0.25 /spl mu/m) are used for the estimation of the signal latency and the power consumption as a function of the interconnection length for the different link configurations. It was found that optoelectronic interconnects outperform their electrical counterparts, under certain conditions, especially for relatively long lines and multichannel data links.

[1]  Sung-Mo Kang,et al.  A comprehensive circuit-level model of vertical-cavity surface-emitting lasers , 1999 .

[2]  A Louri,et al.  Architectural approach to the role of optics in monoprocessor and multiprocessor machines. , 2000, Applied optics.

[3]  David A. B. Miller.  Dense two-dimensional integration of optoelectronics and electronics for interconnections , 1998, Photonics West.

[4]  Taiichi Otsuji,et al.  Analysis and application of a novel model for estimating power dissipation of optical interconnections as a function of transmission bit error rate , 1996 .

[5]  Nikos Haralabidis,et al.  A 1 GHz CMOS transimpedance amplifier for chip-to-chip optical interconnects , 2000, 2000 IEEE International Symposium on Circuits and Systems. Emerging Technologies for the 21st Century. Proceedings (IEEE Cat No.00CH36353).

[6]  Sung-Mo Kang,et al.  Rate-equation-based laser models with a single solution regime , 1997 .

[7]  S. Kang,et al.  A simple rate-equation-based thermal VCSEL model , 1999 .

[8]  Eby G. Friedman,et al.  Repeater design to reduce delay and power in resistive interconnect , 1998 .

[9]  F.J. Leonberger,et al.  Optical interconnections for VLSI systems , 1984, Proceedings of the IEEE.

[10]  H. Merkelo,et al.  Comparative evaluation of optical waveguides as alternative interconnections for high performance packaging , 1992 .

[11]  M. A. Neifeld,et al.  Electrical packaging impact on source components in optical interconnects , 1995 .

[12]  Henk Neefs,et al.  Latency requirements of optical interconnects at different memory hierarchy levels of a computer system , 1998, Other Conferences.

[13]  Wolfgang Aicher,et al.  Influence of optical interconnects at the chip and board levels , 1999 .

[14]  Jan M. Rabaey,et al.  Digital Integrated Circuits: A Design Perspective , 1995 .

[15]  N. Haralabidis,et al.  Comparison of the signal latency in optical and electrical interconnections for interchip links , 2001 .

[16]  Nikos Haralabidis,et al.  A CMOS laser driver with independently adjustable DC and modulation currents for data rates up to 2.5 Gb/s , 2000, 2000 IEEE International Symposium on Circuits and Systems. Emerging Technologies for the 21st Century. Proceedings (IEEE Cat No.00CH36353).

[17]  Ashok V. Krishnamoorthy,et al.  Scaling optoelectronic-VLSI circuits into the 21st century: a technology roadmap , 1996 .

[18]  Sung-Mo Kang.  Accurate simulation of power dissipation in VLSI circuits , 1986 .

[19]  S C Esener,et al.  Speed and energy analysis of digital interconnections: comparison of on-chip, off-chip, and free-space technologies. , 1998, Applied optics.

[20]  David A. B. Miller,et al.  Limit to the Bit-Rate Capacity of Electrical Interconnects from the Aspect Ratio of the System Architecture , 1997, J. Parallel Distributed Comput..

[21]  Mohamed I. Elmasry,et al.  Low-power CMOS/BiCMOS drivers and receivers for on-chip interconnects , 1995 .

[22]  Michael C. Dorneich,et al.  Methods for comparative analysis of waveform degradation in electrical and optical high-performance interconnections , 1991, Other Conferences.

[23]  Chi Fan,et al.  Power minimization and technology comparisons for digital free-space optoelectronic interconnections , 1999 .

[24]  Brian Thibeault,et al.  Recent advances and important issues in vertical-cavity lasers , 1997, Photonics West.

[25]  S H Lee,et al.  Comparison between optical and electrical interconnects based on power and speed considerations. , 1988, Applied optics.

[26]  Christer Svensson,et al.  A comparison of dissipated power and signal-to-noise ratios in electrical and optical interconnects , 1999 .

[27]  Ashok V. Krishnamoorthy,et al.  Optoelectronic-VLSI: photonics integrated with VLSI circuits , 1998 .

[28]  K. Bertilsson,et al.  High-speed characteristics of low-optical loss oxide-apertured vertical-cavity lasers , 1997, IEEE Photonics Technology Letters.