A mechanistic study of microcracking in transversely isotropic ceramic–metal systems

[1]  M. Bäker,et al.  A parametric study of the stress state of thermal barrier coatings: Part I: creep relaxation , 2004 .

[2]  D. Clarke,et al.  Microstructural aspects of the sintering of thermal barrier coatings , 2004 .

[3]  E. Jordan,et al.  Stress variation with thermal cycling in the thermally grown oxide of an EB-PVD thermal barrier coating , 2004 .

[4]  J. Nicholls,et al.  On the effect of ageing on the erosion of EB-PVD TBCs , 2003 .

[5]  A. Evans,et al.  A numerical assessment of the durability of thermal barrier systems that fail by ratcheting of the thermally grown oxide , 2003 .

[6]  P. Wright,et al.  Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling , 2003 .

[7]  John W. Hutchinson,et al.  Simulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling , 2003 .

[8]  D. Clarke.  The lateral growth strain accompanying the formation of a thermally grown oxide , 2003 .

[9]  J. Chaboche,et al.  Numerical simulation of EBPVD thermal barrier coatings spallation , 2003 .

[10]  G. Cailletaud,et al.  Comparison of Oxidation-Growth Stresses in NiO Film Measured by Deflection and Calculated Using Creep Analysis or Finite-Element Modeling , 2002 .

[11]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[12]  A. Evans,et al.  The effect of the thermal barrier coating on the displacement instability in thermal barrier systems , 2002 .

[13]  Tian Jian Lu,et al.  Distributed Porosity as a Control Parameter for Oxide Thermal Barriers Made by Physical Vapor Deposition , 2001 .

[14]  J. A. Thompson,et al.  THE EFFECT OF HEAT TREATMENT ON THE STIFFNESS OF ZIRCONIA TOP COATS IN PLASMA-SPRAYED TBCs , 2001 .

[15]  Jianguo Lin,et al.  A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system.: Part II: Life prediction model , 2001 .

[16]  M. Nakayama,et al.  A MECHANISTIC STUDY OF OXIDATION-INDUCED DEGRADATION IN A PLASMA-SPRAYED THERMAL BARRIER COATING SYSTEM. PART I: MODEL FORMULATION , 2001 .

[17]  A. Evans,et al.  On the Role of Imperfections in The Failure of a Thermal Barrier Coating Made by Electron Beam Deposition , 2000 .

[18]  Wei Gao,et al.  Pilling-Bedworth ratio for oxidation of alloys , 2000 .

[19]  E. Busso.  Oxidation-induced stresses in ceramic-metal interfaces , 1999 .

[20]  Dongming Zhu,et al.  Sintering and Creep Behavior of Plasma-Sprayed Zirconia and Hafnia Based Thermal Barrier Coatings , 1998 .

[21]  Maurice Gell,et al.  Thermal/residual stress in an electron beam physical vapor deposited thermal barrier coating system , 1998 .

[22]  E. Busso,et al.  Residual Stress Generation During Constrained Sintering Of Layered Ceramic Thin Film Structures , 1997 .

[23]  M. Kachanov,et al.  Effective Moduli of Solids With Cavities of Various Shapes , 1994 .

[24]  A. Cocks,et al.  Constitutive models for the sintering of ceramic components—I. Material models , 1992 .

[25]  J. Besson,et al.  Rheology of porous alumina and simulation of hot isostatic pressing , 1992 .

[26]  P. Becher,et al.  Creep Behavior of a SiC-Whisker-Reinforced Alumina , 1990 .