A CONTROL METHOD FOR DRIVING DUAL PERMANENT MAGNET SYNCHRONOUS MOTORS FED BY SINGLE M ATRİX CONVERTER

Preliminary communication In this study, a control method is created to drive two parallel-connected permanent magnet synchronous motors fed by a single converter. Matrix converter used in this work provides ac-ac conversion in one stage. The matrix converter model and d-q model of dual PMSMs are performed in Matlab/Simulink. In industrial applications containing dual motors fed from a single converter, volume and weight of the drive system decreases, power electronics switches and other components are reduced and the installation cost decreases. Because of these advantages, many methods are being developed by researchers to control the dual motor drives. In this study, the motor control has been performed by using the average speed method. Control of dual permanent magnet synchronous motors with a single converter is implemented with ANFIS-based neural fuzzy controllers. All parameters of the motors are taken equal since two identical permanent magnet synchronous motors are considered. Two various operation conditions are investigated in the simulation. In the first case, one of the identical motors is operated on no-load, while the other one is operated with the rated load. In the second case, each motor is operated with various load torques varying with the time. Corresponding simulation results have been presented to show the performance of the drive system.

[1]  A. Alesina,et al.  Analysis and design of optimum-amplitude nine-switch direct AC-AC converters , 1989 .

[2]  R.R. Beasant,et al.  An approach to the realization of a high-power Venturini converter , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[3]  Jyh-Shing Roger Jang,et al.  ANFIS: adaptive-network-based fuzzy inference system , 1993, IEEE Trans. Syst. Man Cybern..

[4]  Sedat Sünter,et al.  A vector controlled matrix converter induction motor drive , 1995 .

[5]  H. Rasmussen,et al.  Adaptive observer for speed sensorless PM motor control , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[6]  Sedat Sünter,et al.  Control of a permanent magnet synchronous motor fed by a direct AC-AC converter , 2005 .

[7]  M. Pietrzak-David,et al.  Mono inverter dual parallel PMSM - structure and control strategy , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[8]  Narayanaswamy. P.R. Iyer.  Carrier based modulation technique for three phase Matrix Converters – state of the art progress , 2010, 2010 IEEE Region 8 International Conference on Computational Technologies in Electrical and Electronics Engineering (SIBIRCON).

[9]  Zulkifilie Ibrahim,et al.  Dual motor drives for PMSM using average phase current technique , 2010, 2010 IEEE International Conference on Power and Energy.

[10]  Dahaman Ishak,et al.  A speed sensorless field oriented control of parallel- connected dual PMSM , 2011, 2011 IEEE International Conference on Control System, Computing and Engineering.

[11]  Pascal Maussion,et al.  Mono inverter multi-parallel permanent magnet synchronous motor: structure and control strategy , 2011 .

[12]  Stanislav Fligl,et al.  Design and Dimensioning of Essential Passive Components for the Matrix Converter Prototype , 2012 .

[13]  M. Fadel,et al.  A new approach to Predictive Torque Control with Dual Parallel PMSM system , 2013, 2013 IEEE International Conference on Industrial Technology (ICIT).

[14]  Sedat Sunter,et al.  Comparation of PI and Neural Fuzzy based closed loop control methods for permanent magnet synchronous motor fed by matrix converter , 2015, 2015 Intl Aegean Conference on Electrical Machines & Power Electronics (ACEMP), 2015 Intl Conference on Optimization of Electrical & Electronic Equipment (OPTIM) & 2015 Intl Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION).