Type Synthesis of Single-Loop Overconstrained 6R Spatial Mechanisms for Circular Translation

To discover single-degree-of-freedom (DOF) single-loop overconstrained mechanisms is still an open problem. This paper deals with the type synthesis of single DOF single-loop overconstrained 6RMCTs (6R spatial mechanisms for circular translation). These mechanisms provide alternatives to planar parallelograms and are also associated with self-motion of several translational parallel mechanisms. 6RMCTs are to be obtained using a construction approach in combination with the approaches to the type synthesis of parallel mechanisms. By imposing certain conditions on the hybrid overconstrained 6R (plano-spherical, plano-Bennett, double-spherical, and spherico-Bennett) mechanisms, Bricard plane symmetric mechanism, and Bricard line symmetric mechanism, six special cases of 6RMCTs are obtained. By combining planar parallelograms with these special mechanisms, the general cases of 6RMCTs are then constructed. Finally, 4R2H, 2R4H, and 6H mechanisms for circular translation are obtained from the above 6RMCTs by replacing one or more pairs of R (revolute) joints with parallel axes each with a pair of H (helical) joints with parallel axes and the same pitch. This work contributes to the research on overconstrained six-bar mechanisms and further reveals that the research areas of parallel mechanisms and single-loop overconstrained mechanisms are closely related.

[1]  Josef Schicho,et al.  Classification of Angle-Symmetric 6R Linkage , 2013, ArXiv.

[2]  Constantinos Mavroidis,et al.  Analysis of Overconstrained Mechanisms , 1995 .

[3]  J E Baker.  Using the Single Reciprocal Screw to Confirm Mobility of a Six-Revolute Linkage , 2010 .

[4]  Martin Pfurner.  A New Family of Overconstrained 6R-Mechanisms , 2009 .

[5]  Kenneth J. Waldron.  Hybrid overconstrained linkages , 1968 .

[6]  Zhong You,et al.  An Extended Myard Linkage and its Derived 6R Linkage , 2008 .

[7]  J.Eddie Baker.  Overconstrained six-bars with parallel adjacent joint-axes , 2003 .

[8]  K Wohlhart.  Merging two general goldberg 5R linkages to obtain a new 6R space mechanism , 1991 .

[9]  Xianwen Kong,et al.  Type Synthesis of Parallel Mechanisms , 2010, Springer Tracts in Advanced Robotics.

[10]  J. M. Hervé.  A NEW FOUR-BAR LINKAGE COMPLETING DELASSUS’ FINDINGS , 2011 .

[11]  Xianwen Kong,et al.  Type synthesis of single-DOF single-loop mechanisms with two operation modes , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[12]  Clément Gosselin,et al.  Type Synthesis of Three-Degree-of-Freedom Spherical Parallel Manipulators , 2004, Int. J. Robotics Res..

[13]  Jian S. Dai,et al.  Axis Constraint Analysis and Its Resultant 6R Double-Centered Overconstrained Mechanisms , 2011 .

[14]  J.Eddie Baker,et al.  The Bennett, Goldberg and Myard linkages—in perspective , 1979 .

[15]  Josef Schicho,et al.  Construction of Overconstrained Linkages by Factorization of Rational Motions , 2012, ARK.