论文信息 - Adaptive Tracking Control for a DC Motor

Adaptive Tracking Control for a DC Motor

The objective of this paper is to design an adaptive tracking controller for a DC motor. The adaptation gains of the controller are adapted based on the MIT rule. A desired sine wave is used as a reference trajectory. The DC motor traces the reference trajectory continuously. The voltage amplitude of a sine wave is corresponding to the angular position of the DC motor shaft. In order to investigate the tracking performance of this controller, one suitable performance index is introduced for the evaluation. The effect of the reference model is also studied.

Santai Hwang | R. Carmichael

[1] Karl Johan Åström,et al. Adaptive Control , 1989, Embedded Digital Control with Microcontrollers.

[2] Sahjendra N. Singh. Adaptive model following control of nonlinear robotic systems , 1985 .

[3] Mansour Eslami,et al. Robust adaptive controller designs for robot manipulator systems , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[4] Mansour Eslami,et al. Adaptive controller designs for robot manipulator systems using Lyapunov direct method , 1985 .

[5] Ten-Huei Guo,et al. Adaptive linear controller for robotic manipulators , 1983 .

[6] Suguru Arimoto,et al. An adaptive trajectory control of manipulators , 1981 .

[7] C.s.g. Lee,et al. An adaptive control strategy for mechanical manipulators , 1984 .

[8] Steven Dubowsky,et al. The application of model-referenced adaptive control to robotic manipulators , 1979 .

[9] M. Balas,et al. Model Reference Adaptive Control of Large Structural Systems , 1983 .

[10] J. Amerongen,et al. Model Reference Adaptive Control , 2018, The Control Systems Handbook.

[11] Benjamin C. Kuo,et al. AUTOMATIC CONTROL SYSTEMS , 1962, Universum:Technical sciences.