In2O3 Nanotower Hydrogen Gas Sensors Based on Both Schottky Junction and Thermoelectronic Emission

Indium oxide (In2O3) tower-shaped nanostructure gas sensors have been fabricated on Cr comb-shaped interdigitating electrodes with relatively narrower interspace of 1.5 μm using thermal evaporation of the mixed powders of In2O3 and active carbon. The Schottky contact between the In2O3 nanotower and the Cr comb-shaped interdigitating electrode forms the Cr/In2O3 nanotower Schottky diode, and the corresponding temperature-dependent I-V characteristics have been measured. The diode exhibits a low Schottky barrier height of 0.45 eV and ideality factor of 2.93 at room temperature. The In2O3 nanotower gas sensors have excellent gas-sensing characteristics to hydrogen concentration ranging from 2 to 1000 ppm at operating temperature of 120–275 °C, such as high response (83 % at 240 °C to 1000 ppm H2), good selectivity (response to H2, CH4, C2H2, and C3H8), and small deviation from the ideal value of power exponent β (0.48578 at 240 °C). The sensors show fine long-term stability during exposure to 1000 ppm H2 under operating temperature of 240 °C in 30 days. Lots of oxygen vacancies and chemisorbed oxygen ions existing in the In2O3 nanotowers according to the x-ray photoelectron spectroscopy (XPS) results, the change of Schottky barrier height in the Cr/In2O3 Schottky junction, and the thermoelectronic emission due to the contact between two In2O3 nanotowers mainly contribute for the H2 sensing mechanism. The growth mechanism of the In2O3 nanotowers can be described to be the Vapor-Solid (VS) process.

[1]  Po-Chiang Chen,et al.  A nanoelectronic nose: a hybrid nanowire/carbon nanotube sensor array with integrated micromachined hotplates for sensitive gas discrimination , 2009, Nanotechnology.

[2]  Zhihua Wang,et al.  Fine-tuning the structure of cubic indium oxide and their ethanol-sensing properties , 2014 .

[3]  Tong Zhang,et al.  Au-loaded In2O3 nanofibers-based ethanol micro gas sensor with low power consumption , 2011 .

[4]  J. H. Lee,et al.  Large-scale fabrication of highly sensitive SnO2 nanowire network gas sensors by single step vapor phase growth , 2012 .

[5]  S. Capone,et al.  Methanol gas-sensing properties of CeO2–Fe2O3 thin films , 2006 .

[6]  Y. Park,et al.  Formation of networked ZnO nanowires by vapor phase growth and their sensing properties with respect to CO , 2011 .

[7]  Jenshan Lin,et al.  Hydrogen-selective sensing at room temperature with ZnO nanorods , 2005 .

[8]  Bohr‐Ran Huang,et al.  A facile synthesis of ZnO nanotubes and their hydrogen sensing properties , 2013 .

[9]  S. Ghosh,et al.  Enhanced H2S sensing characteristics of La-doped In2O3: Effect of Pd sensitization , 2009 .

[10]  Zhongming Zeng,et al.  The detection of H2S at room temperature by using individual indium oxide nanowire transistors , 2009, Nanotechnology.

[11]  G. Yang,et al.  Nanostructures and self-catalyzed growth of SnO2 , 2005 .

[12]  Jin Li,et al.  Multilayered ZnO Nanosheets with 3D Porous Architectures: Synthesis and Gas Sensing Application , 2010 .

[13]  D. Kang,et al.  A Controlled Method to Synthesize Hybrid In2O3/Ag Nanochains and Nanoparticles: Surface-Enhanced Raman Scattering , 2009 .

[14]  D. Xue,et al.  Room-temperature ferromagnetism in Er-doped ZnO thin films , 2009 .

[15]  A. R. Bari,et al.  Detection of H2S gas at lower operating temperature using sprayed nanostructured In2O3 thin films , 2013, Bulletin of Materials Science.

[16]  Bing Wang,et al.  Field emission properties and growth mechanism of In2O3 nanostructures , 2014, Nanoscale Research Letters.

[17]  Mei-hua Zhou,et al.  Different morphologies of ZnO and their ethanol sensing property , 2014 .

[18]  Youguo Yan,et al.  Synthesis of ZnO nanotowers controlled by a reagent's vapour pressure , 2013 .

[19]  Peng Sun,et al.  Preparation and gas sensing properties of hierarchical flower-like In2O3 microspheres , 2013 .

[20]  Yun Chan Kang,et al.  Enhanced C2H5OH sensing characteristics of nano-porous In2O3 hollow spheres prepared by sucrose-mediated hydrothermal reaction , 2011 .

[21]  Ahsanulhaq Qurashi,et al.  Fabrication and gas sensing properties of In2O3 nanopushpins , 2009 .

[22]  H. Zeng,et al.  In2O3 Nanotowers: Controlled Synthesis and Mechanism Analysis , 2007 .

[23]  Jiaqiang Xu,et al.  Hydrothermal synthesis of In2O3 for detecting H2S in air , 2006 .

[24]  Ghenadii Korotcenkov,et al.  Indium oxide ceramics doped by selenium for one-electrode gas sensors , 2012 .

[25]  Zhonghua Wu,et al.  The local structure, magnetic, and transport properties of Cr-doped In2O3 films , 2013 .

[26]  Ahsanulhaq Qurashi,et al.  A generic approach for controlled synthesis of In2O3 nanostructures for gas sensing applications , 2009 .

[27]  Bing Wang,et al.  Self-assembled and Pd decorated Zn2SnO4/ZnO wire-sheet shape nano-heterostructures networks hydrogen gas sensors , 2014 .

[28]  Jun Chen,et al.  Self-heated hydrogen gas sensors based on Pt-coated W18O49 nanowire networks with high sensitivity, good selectivity and low power consumption , 2011 .

[29]  Tae Il Lee,et al.  Fabrication and Characterization of ZnO Single Nanowire-Based Hydrogen Sensor , 2010 .

[30]  Y. Zuo,et al.  Effects of carbothermal annealing on structure defects, electrical and magnetic properties in Fe-doped In2O3 , 2009 .

[31]  Jian-ming Hong,et al.  Fabrication and photoluminescence characteristics of single crystalline In2O3 nanowires , 2003 .

[32]  Elisabetta Comini,et al.  Synthesis of In2O3–ZnO core–shell nanowires and their application in gas sensing , 2011 .

[33]  Guowei Yang,et al.  Fabrication of a SnO2 Nanowire Gas Sensor and Sensor Performance for Hydrogen , 2008 .

[34]  Catalyst-free shape controlled synthesis of In2O3 pyramids and octahedron: Structural properties and growth mechanism , 2009 .

[35]  Geoffrey A. Ozin,et al.  Tin dioxide opals and inverted opals: near-ideal microstructures for gas sensors , 2001 .

[36]  A. Pal,et al.  Hydrogen sensor based on thin film nanocrystalline n-GaN/Pd Schottky diode , 2007 .

[37]  H. Grubin.  The physics of semiconductor devices , 1979, IEEE Journal of Quantum Electronics.

[38]  Bohr‐Ran Huang,et al.  Core–shell structure of zinc oxide/indium oxide nanorod based hydrogen sensors , 2012 .

[39]  Ahsanulhaq Qurashi,et al.  Catalyst supported growth of In2O3 nanostructures and their hydrogen gas sensing properties , 2010 .

[40]  C. Gu,et al.  Detection of volatile organic compounds by using a single temperature-modulated SnO2 gas sensor and artificial neural network , 2007 .

[41]  Li Lu,et al.  Hydrothermal synthesis of MnO2/CNT nanocomposite with a CNT core/porous MnO2 sheath hierarchy architecture for supercapacitors , 2012, Nanoscale Research Letters.

[42]  Pooi See Lee,et al.  Chemical sensing investigations on Zn–In2O3 nanowires , 2012 .

[43]  T. Hyodo,et al.  Microsphere templating as means of enhancing surface activity and gas sensitivity of CaCu(3)Ti(4)O(12) thin films. , 2006, Nano letters.

[44]  Wei Wang,et al.  A highly sensitive and fast-responding sensor based on electrospun In2O3 nanofibers , 2009 .

[45]  Jason L. Johnson,et al.  Room temperature hydrogen detection using Pd-coated GaN nanowires , 2008 .

[46]  Xiumei Xu,et al.  One-step synthesis and gas sensing characteristics of urchin-like In2O3 , 2013 .