论文信息 - Simulation of Turbulent Flow in a Channel Partially Occupied by a Porous Layer Considering the Stress Jump at the Interface

Simulation of Turbulent Flow in a Channel Partially Occupied by a Porous Layer Considering the Stress Jump at the Interface

Environmental flows of extreme importance, such as turbulent atmospheric boundary layer over thick rain forests, may benefit from more realistic mathematical models. Accordingly, flow over layers of dense vegetation can be characterized by some sort of porous structure through which a fluid permeates. For hybrid media, involving both a porous structure and a clear flow region, difficulties arise due to the proper mathematical treatment given at the interface. The literature proposes a jump condition in which shear stresses on both sides of the interface are not of the same value. This paper presents numerical solutions for such hybrid medium, considering here a channel partially filled with a porous layer through which fluid flows in turbulent regime. One unique set of transport equations is applied to both regions. Effects of Reynolds number, porosity, permeability and jump coefficient on mean and turbulence fields are investigated. Results indicate that depending on the value of the stress jump parameters, a substantially different structure for the turbulent field is obtained.Copyright © 2002 by ASME

Marcelo J.S. de Lemos | Roberto da Silva

[1] Andrey V. Kuznetsov,et al. Analytical investigation of the fluid flow in the interface region between a porous medium and a clear fluid in channels partially filled with a porous medium , 1996 .

[2] Andrey V. Kuznetsov,et al. Influence of the stress jump condition at the porous-medium/clear-fluid interface on a flow at a porous wall , 1997 .

[3] Andrey V. Kuznetsov,et al. Fluid mechanics and heat transfer in the interface region between a porous medium and a fluid layer: a boundary layer solution. , 1999 .