Deployment of wireless sensor networks for biomedical applications

Biomedical wireless sensor networks are a key technology to enable the development of new healthcare services and/or applications, reducing costs and improving the citizen's quality of life. However, since they deal with health data, such networks should implement mechanisms to enforce high levels of quality of service. In most cases, the sensor nodes that form such networks are small and battery powered, and these extra quality of service mechanisms mean significant lifetime reduction due to the extra energy consumption. The network lifetime is thus a relevant feature to ensure the quality of service requirements. In order to maximise the network lifetime and its ability to offer the required quality of service new strategies are needed to increase the energy efficiency and balance in the network. The focus of this work is the use of the remaining energy in each node combined with information on the reliability of the wireless links, as a metric to form reliable and energy-aware routes throughout the network. This paper presents and discusses an implementation of a lifetime-extending methodology based on energy-aware routing and relay nodes simulated for three different logical topologies. Our conclusion is that such methodology may increase the network lifetime an average of 45%.

[1]  Philip Levis,et al.  RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks , 2012, RFC.

[2]  JeongGil Ko,et al.  Wireless Sensor Networks for Healthcare , 2010, Proceedings of the IEEE.

[3]  JeongGil Ko,et al.  ContikiRPL and TinyRPL: Happy Together , 2011 .

[4]  Ian F. Akyildiz,et al.  Wireless multimedia sensor networks: A survey , 2007, IEEE Wireless Communications.

[5]  Mario Di Francesco,et al.  Energy conservation in wireless sensor networks: A survey , 2009, Ad Hoc Networks.

[6]  Adam Dunkels,et al.  Contiki - a lightweight and flexible operating system for tiny networked sensors , 2004, 29th Annual IEEE International Conference on Local Computer Networks.

[7]  R. Asokan.  A review of Quality of Service (QoS) routing protocols for mobile Ad hoc networks , 2010, 2010 International Conference on Wireless Communication and Sensor Computing (ICWCSC).

[8]  Nei Kato,et al.  Extending the lifetime of wireless sensor networks: A hybrid routing algorithm , 2012, Comput. Commun..

[9]  Soundar R. T. Kumara,et al.  Distributed routing in wireless sensor networks using energy welfare metric , 2010, Inf. Sci..

[10]  Lei Shu,et al.  Intra-mobility handover enhancement in healthcare wireless sensor networks , 2012, 2012 IEEE 14th International Conference on e-Health Networking, Applications and Services (Healthcom).

[11]  Adam Dunkels,et al.  Cross-Level Sensor Network Simulation with COOJA , 2006, Proceedings. 2006 31st IEEE Conference on Local Computer Networks.

[12]  L. Oberg,et al.  A Complete Energy Dissipation Model forWireless Sensor Networks , 2007, 2007 International Conference on Sensor Technologies and Applications (SENSORCOMM 2007).

[13]  Kemal Bicakci,et al.  Prolonging network lifetime with multi-domain cooperation strategies in wireless sensor networks , 2010, Ad Hoc Networks.

[14]  Paulo Mendes,et al.  Monitoring QoS over Wireless Sensor Networks - For Medical Applications , 2011, BIODEVICES.

[15]  Soundar R. T. Kumara,et al.  Distributed energy balanced routing for wireless sensor networks , 2009, Comput. Ind. Eng..

[16]  Antonella Molinaro,et al.  From MANET To IETF ROLL Standardization: A Paradigm Shift in WSN Routing Protocols , 2011, IEEE Communications Surveys & Tutorials.

[17]  Paulo Mendes,et al.  Framework for QoS Performance Assessment on Biomedical Wireless Sensor Networks , 2012, BIODEVICES.

[18]  Falko Dressler,et al.  On the lifetime of wireless sensor networks , 2009, TOSN.