Dependence of high-temperature PEM fuel cell performance on Nafion® content

[1]  James M. Fenton,et al.  Analysis of Polarization Curves to Evaluate Polarization Sources in Hydrogen/Air PEM Fuel Cells , 2005 .

[2]  H. R. Kunz,et al.  High-Performance PEMFCs at Elevated Temperatures Using Nafion 112 Membranes , 2005 .

[3]  Yu Wei,et al.  Improvement in high temperature proton exchange membrane fuel cells cathode performance with ammonium carbonate , 2005 .

[4]  Vijay Ramani,et al.  Stabilized heteropolyacid/Nafion® composite membranes for elevated temperature/low relative humidity PEFC operation , 2005 .

[5]  B. McCloskey,et al.  12-Tungstophosphoric Acid Composites with Sulfonated or Unsulfonated Epoxies for High-Temperature PEMFCs , 2005 .

[6]  G. Sasikumar,et al.  Optimum Nafion content in PEM fuel cell electrodes , 2004 .

[7]  Michael Eikerling,et al.  Functionally graded cathode catalyst layers for polymer electrolyte fuel cells - I. Theoretical modeling , 2004 .

[8]  Y. Si,et al.  Nafion-Teflon- Zr ( HPO 4 ) 2 Composite Membranes for High-Temperature PEMFCs , 2004 .

[9]  Hubert A. Gasteiger,et al.  Dependence of PEM fuel cell performance on catalyst loading , 2004 .

[10]  Prabhuram Joghee,et al.  Preparation and characterization of hybrid Nafion–silica membrane doped with phosphotungstic acid for high temperature operation of proton exchange membrane fuel cells , 2004 .

[11]  G. Lindbergh,et al.  Influence of the composition on the structure and electrochemical characteristics of the PEFC cathode , 2003 .

[12]  G. Alberti,et al.  Composite Membranes for Medium-Temperature PEM Fuel Cells , 2003 .

[13]  Z. Qi,et al.  Advanced Fuel Cell Catalysts Sulfonation of Carbon-Supported Catalysts Using 2-Aminoethanesulfonic Acid , 2003 .

[14]  R. Masel,et al.  Effects of Nafion as a binding agent for unsupported nanoparticle catalysts , 2003 .

[15]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[16]  Z. Qi,et al.  Low Pt loading high performance cathodes for PEM fuel cells , 2003 .

[17]  Andrew B. Bocarsly,et al.  Silicon Oxide Nafion Composite Membranes for Proton-Exchange Membrane Fuel Cell Operation at 80-140°C , 2002 .

[18]  Paola Costamagna,et al.  Approaches and technical challenges to high temperature operation of proton exchange membrane fuel cells , 2001 .

[19]  P. Pickup,et al.  Chemical Modification of Proton Exchange Membrane Fuel Cell Catalysts with a Sulfonated Silane , 2001 .

[20]  J. Song,et al.  Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method , 2001 .

[21]  M. Doyle,et al.  High‐Temperature Proton Conducting Membranes Based on Perfluorinated Ionomer Membrane‐Ionic Liquid Composites , 2000 .

[22]  E. Passalacqua,et al.  Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC , 1999 .

[23]  Sanjeev Mukerjee,et al.  Effects of Nafion impregnation on performances of PEMFC electrodes , 1998 .

[24]  S. Srinivasan,et al.  Measurements of proton conductivity in the active layer of PEM fuel cell gas diffusion electrodes , 1998 .

[25]  Jean St-Pierre,et al.  Low Cost Electrodes for Proton Exchange Membrane Fuel Cells Performance in Single Cells and Ballard Stacks , 1997 .

[26]  Shimshon Gottesfeld,et al.  The Water Content Dependence of Electro-Osmotic Drag in Proton-Conducting Polymer Electrolytes , 1995 .

[27]  M. Watanabe,et al.  An experimental prediction of the preparation condition of Nafion-coated catalyst layers for PEFCs , 1995 .