Tempering of an additively manufactured microsegregated hot-work tool steel: a high-temperature synchrotron X-ray diffraction study

[1]  A. Molinari,et al.  Tempering behavior of a direct laser deposited hot work tool steel: Influence of quenching on secondary hardening and microstructure , 2021 .

[2]  D. Shim,et al.  Microstructural evolution and martensitic transformation in FeCrV alloy fabricated via additive manufacturing , 2021 .

[3]  M. Herbig,et al.  Carbon redistribution in quenched and tempered lath martensite , 2021 .

[4]  P. Krakhmalev,et al.  Evaluation of post-treatments of novel hot-work tool steel manufactured by laser powder bed fusion for aluminum die casting applications , 2021 .

[5]  S. Pasebani,et al.  Selective laser melting and tempering of H13 tool steel for rapid tooling applications , 2020 .

[6]  Yong-qiang Yang,et al.  Design and additive manufacturing of novel conformal cooling molds , 2020, Materials & Design.

[7]  C. Broeckmann,et al.  Comparative Study of the Tempering Behavior of Different Martensitic Steels by Means of In-Situ Diffractometry and Dilatometry , 2020, Materials.

[8]  A. Gabriel,et al.  Assessment of laser power and scan speed influence on microstructural features and consolidation of AISI H13 tool steel processed by additive manufacturing , 2020 .

[9]  Ke Wang,et al.  The effect of heat treatment on microstructure and properties of laser-deposited TiC reinforced H13 steel matrix composites , 2020, Optik.

[10]  Hui Song,et al.  High strength (~2000 MPa) or highly ductile (~11%) additively manufactured H13 by tempering at different conditions , 2020 .

[11]  S. Allain,et al.  Microstructure Evolution and Competitive Reactions during Quenching and Partitioning of a Model Fe–C–Mn–Si Alloy , 2020, Metals.

[12]  M. Pellizzari,et al.  Fracture Toughness of a Hot Work Tool Steel Fabricated by Laser‐Powder Bed Fusion Additive Manufacturing , 2019, steel research international.

[13]  J. H. Lee,et al.  Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions , 2019, Materials Characterization.

[14]  M. Pellizzari,et al.  Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing , 2019, Materials Science and Engineering: A.

[15]  W. Fredriksson,et al.  Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel , 2019, Materials Science and Engineering: A.

[16]  M. Pellizzari,et al.  Strengthening mechanisms in an ultrafine grained powder metallurgical hot work tool steel produced by high energy mechanical milling and spark plasma sintering , 2019, Materials Science and Engineering: A.

[17]  Yusheng Shi,et al.  High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting , 2018, Metallurgical and Materials Transactions B.

[18]  M. Merklein,et al.  Investigation of Heat Treatment Strategies for Additively-Manufactured Tools of X37CrMoV5-1 , 2018, Metals.

[19]  Xin Sun,et al.  Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography , 2018, JOM.

[20]  M. Pellizzari,et al.  H13–partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting , 2018 .

[21]  J. Krell,et al.  General investigations on processing tool steel X40CrMoV5-1 with selective laser melting , 2018 .

[22]  S. Babu,et al.  Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel : segregation, partitioning and carbide precipitation , 2018 .

[23]  Xiao-nan Wang,et al.  Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel , 2017, Journal of Materials Engineering and Performance.

[24]  Leonardo Wu,et al.  Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry , 2017 .

[25]  M. Brandt,et al.  Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting , 2017, The International Journal of Advanced Manufacturing Technology.

[26]  M. Jahazi,et al.  Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel , 2016 .

[27]  Martin Leary,et al.  SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices , 2016 .

[28]  Y. Zhong,et al.  Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting , 2016 .

[29]  I. Uygur,et al.  Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel , 2015, Journal of Materials Engineering and Performance.

[30]  Wenyi Yan,et al.  Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications , 2015 .

[31]  Wang Mingbo,et al.  Precipitation Behaviors and Strengthening of Carbides in H13 Steel during Annealing , 2015 .

[32]  F. Belzunce,et al.  The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel , 2015 .

[33]  Thomas Niendorf,et al.  Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting , 2015, Metallurgical and Materials Transactions B.

[34]  Indranil Manna,et al.  Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel , 2014 .

[35]  Guilherme Abreu Faria,et al.  Exploring metallic materials behavior through in situ crystallographic studies by synchrotron radiation = : Explorando o comportamento de materiais metálicos através de estudos cristalográficos in situ via radiação síncrotron , 2014 .

[36]  D. Barbier.  Extension of the Martensite Transformation Temperature Relation to Larger Alloying Elements and Contents , 2014 .

[37]  W. Poole,et al.  The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel , 2013, Metallurgical and Materials Transactions A.

[38]  H. Leitner,et al.  Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel , 2013 .

[39]  H. Leitner,et al.  Retained Austenite Decomposition and Carbide Formation During Tempering a Hot-Work Tool Steel X38CrMoV5-1 Studied by Dilatometry and Atom Probe Tomography , 2012, Metallurgical and Materials Transactions A.

[40]  H. Leitner,et al.  Atom probe study of the carbon distribution in a hardened martensitic hot-work tool steel X38CrMoV5-1. , 2012, Micron.

[41]  M. Thuvander,et al.  Microstructures and hardness of as-quenched martensites (0.10.5%C) , 2011 .

[42]  George E. Totten,et al.  Steel Heat Treatment : Metallurgy and Technologies , 2006 .

[43]  Rémy Glardon,et al.  Direct rapid tooling: a review of current research , 1998 .

[44]  J. Mazumder,et al.  The direct metal deposition of H13 tool steel for 3-D components , 1997 .

[45]  R. Colaço,et al.  Laser surface treatment of tool steels , 1995, Optical and Quantum Electronics.

[46]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[47]  J.-P. Kruth,et al.  Influence of Powder Bed Preheating on Microstructure and Mechanical Properties of H13 Tool Steel SLM Parts , 2016 .

[48]  Ramona Hölker,et al.  Hot Extrusion Dies with Conformal Cooling Channels Produced by Additive Manufacturing , 2015 .

[49]  M. J. Peet,et al.  In-situ observations of lattice parameter fluctuations in austenite and transformation to bainite , 2005 .

[50]  Rajiv Shivpuri,et al.  Dies and Die Materials for Hot Forging , 2005 .