Boundary element crack closure calculation of three-dimensional stress intensity factors

A general method for boundary element-crack closure integral calculation of three-dimensional stress intensity factors is presented. An equation for the strain energy release rate in terms of products of nodal values of tractions and displacements is obtained. Embedded and surface cracks of modes I, II, and III are analyzed using the proposed method. The multidomain boundary element technique is introduced so that the crack surface geometry is correctly modeled and the unsymmetrical boundary conditions for mode's II and III crack analysis are handled conveniently. Conventional quadrilateral elements are sufficient for this method and the selection of the size of the crack front elements is independent of the crack mode and geometry. For all of the examples demonstrated in this paper, 54 boundary elements are used, and the most suitable ratio of the width of the crack front elements to the crack depth is 1/10 and the calculation error is kept within ±1.5 percent. Compared to existing analytical and finite element solutions the boundary element-crack closure integral method is very efficient and accurate and it can be easily applied to general three-dimensional crack problems.

[1]  M. K. Kassir,et al.  Three-Dimensional Stress Distribution Around an Elliptical Crack Under Arbitrary Loadings , 1966 .

[2]  M. Laura Luchi,et al.  Boundary elements for three‐dimensional elastic crack analysis , 1987 .

[3]  S. K. Maiti.  Finite element computation of crack closure integrals and stress intensity factors , 1992 .

[4]  C. Sun,et al.  On strain energy release rates for interfacial cracks in bi-material media , 1987 .

[5]  T. Cruse.  Boundary Element Analysis in Computational Fracture Mechanics , 1988 .

[6]  G. Irwin.  Crack-Extension Force for a Part-Through Crack in a Plate , 1962 .

[7]  A. Ingraffea,et al.  Stress‐intensity factor computation in three dimensions with quarter‐point elements , 1980 .

[8]  Anthony R. Ingraffea,et al.  Two‐dimensional stress intensity factor computations using the boundary element method , 1981 .

[9]  Herbert A. Mang,et al.  A new method for evaluating singular integrals in stress analysis of solids by the direct boundary element method , 1985 .

[10]  Hiroshi Noguchi,et al.  Tension and bending of finite thickness plates with a semi-elliptical surface crack , 1984 .

[11]  Y. L. Gao,et al.  Treatment of bimaterial interface crack problems using the boundary element method , 1990 .

[12]  James C. Newman,et al.  An empirical stress-intensity factor equation for the surface crack , 1981 .

[13]  J. Watson,et al.  Effective numerical treatment of boundary integral equations: A formulation for three‐dimensional elastostatics , 1976 .