Manufacturing of optical elements by non-contact laser processing

We report on a photonic process chain to manufacture optical elements by non-contact all laser based micro-processing. Firstly, pre-defined optics geometries are generated by high-precision 1030 nm femtosecond layer-by-layer ablation. In order to meet high surface quality requirements, inevitable stipulated for optical use, the surface of thus generated elements has to be smoothened by subsequent 10.6 μm CO2 laser polishing. To demonstrate this surface finishing process, a complex optic geometry i.e. an axicon array consisting of 37 individual axicons is fabricated within 23 minutes while the polishing shows a reduction of the surface roughness from 0.36 μm to 48 nm. The functionality of the fabricated optic is tested using the 1030 nm wavelength ultrashort pulsed laser. Several sub-Bessel beams exhibiting the typical zeroth-order Bessel beam intensity distribution are observed, in turn confirming the applied manufacturing process to be well applicable for the fabrication of complex optic geometries. Cross sections of the quasi-Bessel beam at the axicon in the middle of the array in both, x- and y-direction, show an almost identical intensity profile, indicating the high contour accuracy of the axicon. Detailed investigations of the axicon in the middle of the array show a tip rounding of 1.37 mm while the sub-beam behind this axicon is measured to have a diameter of 9.5 μm (FWHM) and a Bessel range in propagation direction of 8.0 mm (FWHM).

[1]  Christophe Gorecki,et al.  Microfabrication of axicons by glass blowing at a wafer-level. , 2019, Optics letters.

[2]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.

[3]  María Teresa Flores-Arias,et al.  Soda-lime glass microlens arrays fabricated by laser: Comparison between a nanosecond and a femtosecond IR pulsed laser , 2016 .

[4]  Feng Chen,et al.  Fabrication of concave spherical microlenses on silicon by femtosecond laser irradiation and mixed acid etching. , 2014, Optics express.

[5]  Ralf Hellmann,et al.  Fabrication of a high-quality axicon by femtosecond laser ablation and CO2 laser polishing for quasi-Bessel beam generation. , 2018, Optics express.

[6]  Juozas Dudutis,et al.  Non-ideal axicon-generated Bessel beam application for intra-volume glass modification. , 2016, Optics express.

[7]  Qing Yang,et al.  Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. , 2010, Optics express.

[8]  Olivier Pinel,et al.  Generation of high conical angle Bessel-Gauss beams with reflective axicons. , 2018, Applied optics.

[9]  Tien-Li Chang,et al.  Surface forming on glass material by femtosecond laser modification with HF etching process , 2015 .

[10]  Simon Ameer-Beg,et al.  Femtosecond laser microstructuring of materials , 1998 .

[11]  Oto Brzobohatý,et al.  High quality quasi-Bessel beam generated by round-tip axicon. , 2008, Optics express.

[12]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[13]  Ralf Hellmann,et al.  Influence of Pulse Duration on High-Precision Manufacturing of 3D Geometries , 2018, Journal of Laser Micro/Nanoengineering.

[14]  Koji Sugioka,et al.  Fabrication of 3D microoptical lenses in photosensitive glass using femtosecond laser micromachining , 2006 .

[15]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[16]  Alexey A. Wolf,et al.  High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser , 2016 .

[17]  Wilson Sibbett,et al.  3D laser nano-printing on fibre paves the way for super-focusing of multimode laser radiation , 2018, Scientific Reports.

[18]  Carsten Reinhardt,et al.  Closely packed hexagonal conical microlens array fabricated by direct laser photopolymerization. , 2012, Applied optics.

[19]  Ralf Hellmann,et al.  Rapid fabrication of precise glass axicon arrays by an all laser-based manufacturing technology , 2020 .

[20]  Reinhart Poprawe,et al.  Laser polishing and laser shape correction of optical glass , 2017 .

[21]  Sohn Ik-Bu,et al.  Formation of Micro-lens Array using Femtosecond and CO2 lasers , 2016 .

[22]  Ralf Hellmann,et al.  Laser-fabricated axicons challenging the conventional optics in glass processing applications. , 2020, Optics express.

[23]  F P Meyer,et al.  Temperature dependence of the extinction coefficient of fused silica for CO(2) laser wavelengths. , 1987, Applied optics.

[24]  Denzel Bridges,et al.  Fabrication of embedded microball lens in PMMA with high repetition rate femtosecond fiber laser. , 2015, Optics express.

[25]  Wenhao Huang,et al.  Micro lens fabrication by means of femtosecond two photon photopolymerization. , 2006, Optics express.

[26]  Cheng-Hsiang Lin,et al.  Fabrication of microlens arrays in photosensitive glass by femtosecond laser direct writing , 2009 .