Sensitivity Enhancement of FBG-Based Strain Sensor

A novel fiber Bragg grating (FBG)-based strain sensor with a high-sensitivity is presented in this paper. The proposed FBG-based strain sensor enhances sensitivity by pasting the FBG on a substrate with a lever structure. This typical mechanical configuration mechanically amplifies the strain of the FBG to enhance overall sensitivity. As this mechanical configuration has a high stiffness, the proposed sensor can achieve a high resonant frequency and a wide dynamic working range. The sensing principle is presented, and the corresponding theoretical model is derived and validated. Experimental results demonstrate that the developed FBG-based strain sensor achieves an enhanced strain sensitivity of 6.2 pm/με, which is consistent with the theoretical analysis result. The strain sensitivity of the developed sensor is 5.2 times of the strain sensitivity of a bare fiber Bragg grating strain sensor. The dynamic characteristics of this sensor are investigated through the finite element method (FEM) and experimental tests. The developed sensor exhibits an excellent strain-sensitivity-enhancing property in a wide frequency range. The proposed high-sensitivity FBG-based strain sensor can be used for small-amplitude micro-strain measurement in harsh industrial environments.

[1]  Keith Worden,et al.  An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[2]  Wieslaw Ostachowicz,et al.  An application of Structural Health Monitoring system based on FBG sensors to offshore wind turbine support structure model , 2017 .

[3]  Zude Zhou,et al.  Actualities and Development on Dynamic Monitoring and Diagnosis with Distributed Fiber Bragg Grating in Mechanical Systems , 2013 .

[4]  Gangbing Song,et al.  Design and application of a fiber Bragg grating strain sensor with enhanced sensitivity in the small-scale dam model , 2009 .

[5]  Liu Yueming,et al.  High temperature strain sensor based on a fiber Bragg grating and rhombus metal structure. , 2015 .

[6]  Francis Berghmans,et al.  Mechanical strain-amplifying transducer for fiber Bragg grating sensors with applications in structural health monitoring , 2017, 2017 25th Optical Fiber Sensors Conference (OFS).

[7]  J. Casas,et al.  Application of optical fiber distributed sensing to health monitoring of concrete structures , 2013 .

[8]  Li Cai,et al.  A temperature-independent force transducer using one optical fiber with multiple Bragg gratings , 2016, IEICE Electron. Express.

[9]  Lars Glavind,et al.  Fiber-optical grating sensors for wind turbine blades: a review , 2013 .

[10]  Liang Fang,et al.  Application of Embedded Fiber Bragg Grating (FBG) Sensors in Monitoring Health to 3D Printing Structures , 2016, IEEE Sensors Journal.

[11]  Honghai Liu,et al.  A Three-Dimensional Fiber Bragg Grating Force Sensor for Robot , 2018, IEEE Sensors Journal.

[12]  Nezih Mrad,et al.  Fiber Optic Sensors for Structural Health Monitoring of Air Platforms , 2011, Sensors.

[13]  Gangbing Song,et al.  Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain Measurements , 2017, Sensors.

[14]  Orlando Frazão,et al.  Study of strain-transfer of FBG sensors embedded in unidirectional composites , 2013 .

[15]  Zhongcheng Xia,et al.  High temperature strain sensor based on a fiber Bragg grating and rhombus metal structure. , 2015, Applied optics.

[16]  Li Qin,et al.  Design and Investigation of a Reusable Surface-Mounted Optical Fiber Bragg Grating Strain Sensor , 2016, IEEE Sensors Journal.

[17]  Fu-Kuo Chang,et al.  Structural Health Monitoring , 2016 .

[18]  Donghoon Kang,et al.  Integrated monitoring scheme for a maglev guideway using multiplexed FBG sensor arrays , 2009 .

[19]  Xiaodong Zhang,et al.  An Approach for the Dynamic Measurement of Ring Gear Strains of Planetary Gearboxes Using Fiber Bragg Gratings , 2017, Sensors.

[20]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[21]  Jun Huang,et al.  Strain Modal Analysis of Small and Light Pipes Using Distributed Fibre Bragg Grating Sensors , 2016, Sensors.

[22]  Qingsong Ai,et al.  Intelligent monitoring and diagnosis for modern mechanical equipment based on the integration of embedded technology and FBGS technology , 2011 .

[23]  Lin Gui,et al.  Actualities and Development of Heavy-Duty CNC Machine Tool Thermal Error Monitoring Technology , 2017 .

[24]  Ralph P. Tatam,et al.  Development and application of optical fibre strain and pressure sensors for in-flight measurements , 2016 .

[25]  B. De Pauw,et al.  Development of a mechanical strain amplifying transducer with Bragg grating sensor for low-amplitude strain sensing , 2017 .

[26]  Hui Liu,et al.  Design of an enhanced sensitivity FBG strain sensor and application in highway bridge engineering , 2014 .