Preliminary study on variable conductance loop thermosyphons

Abstract Given that loop thermosyphons are widely used as simple and high-efficiency heat transfer devices, their passive heat transfer performance has attracted considerable research interest. The capability of loop thermosyphons for active heat transfer adjustment can potentially improve the precision and efficiency of heat and temperature management in many fields, but has not received much attention. A variable conductance loop thermosyphon (VCLT) is developed in this study. Heat transfer is precisely adjusted by actively regulating the internal flow resistance of the working fluid. The performance of VCLT under variable flow resistances is tested. The boundary conditions are set to those of a novel cool-storage refrigerator, wherein temperature control directly affects the freshness of stored food. VCLT behaviors under static and dynamic adjustment modes are also examined with the working fluid R134a. The maximum ratio of heat transfer adjustment is approximately 85%, when decreases the mass flow rate from 1.67 g/s to 0.21 g/s with increasing the equivalent thermal resistance from 0.0074 K/W to 0.54 K/W. Finally, the performance is verified with R404a, R407a and R410a. Results demonstrate that VCLT is an efficient and low-cost temperature adjustment device for refrigerators and other applications that require precise temperature control.

[1]  Mehmet Esen,et al.  Experimental investigation of a two-phase closed thermosyphon solar water heater , 2005 .

[2]  I. M. Michaelides,et al.  Computer simulation of the performance of a thermosyphon solar water-heater , 1992 .

[3]  Xiaohua Liu,et al.  Experimental study on the effect of fill ratio on an R744 two-phase thermosyphon loop , 2016 .

[4]  Liu Qiang,et al.  Loop thermosiphon as a feasible cooling method for the stators of gas turbine , 2016 .

[5]  Rahmatollah Khodabandeh,et al.  Heat transfer, flow regime and instability of a nano- and micro-porous structure evaporator in a two-phase thermosyphon loop , 2010 .

[6]  Xin-Rong Zhang,et al.  Experimental investigation of CO2 thermosyphon flow and heat transfer in the supercritical region , 2013 .

[7]  M. S. Naghavi,et al.  A state-of-the-art review on hybrid heat pipe latent heat storage systems , 2015 .

[8]  Zhen Li,et al.  Modelling and applications of annual energy-using simulation module of separated heat pipe heat exchanger , 2013 .

[9]  Shaojie Chen,et al.  Loop thermosyphon performance study for solar cells cooling , 2016 .

[10]  R. Mei,et al.  Visualized investigation of gas–liquid stratified flow boiling of water in a natural circulation thermosyphon loop with horizontal arranged evaporator , 2016 .

[11]  Marcia B. H. Mantelli,et al.  In-flight testing of loop thermosyphons for aircraft cooling , 2016 .

[12]  Fu-Yun Zhao,et al.  Modeling and experimental investigation of looped separate heat pipe as waste heat recovery facility , 2006 .

[13]  Zhen-Hua Liu,et al.  Flow boiling heat transfer in the evaporator of a loop thermosyphon operating with CuO based aqueous nanofluid , 2012 .

[14]  Hasna Louahlia-Gualous,et al.  Experimental investigation of thermosyphon loop thermal performance , 2014 .

[15]  Baolong Wang,et al.  Experimental investigation on two-phase thermosyphon loop with partially liquid-filled downcomer , 2015 .

[16]  Quan Zhang,et al.  Experimental study on the thermal characteristics of micro channel separate heat pipe respect to different filling ratio , 2016 .

[17]  Zhonghao Rao,et al.  Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling , 2016 .

[18]  Itaru Kourakata,et al.  Thermosiphon loop thermal collector for low-temperature waste heat recovery , 2016 .

[19]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[20]  Nay Zar Aung,et al.  Numerical investigation on effect of riser diameter and inclination on system parameters in a two-phase closed loop thermosyphon solar water heater , 2013 .

[21]  Stéphane Le Masson,et al.  Two-phase thermosyphon loop for cooling outdoor telecommunication equipments , 2013 .

[22]  K. S. Chen,et al.  Heat transfer performance of a double-loop separate-type heat pipe : measurement results , 1994 .

[23]  Alessandro Franco,et al.  Closed Loop Two-Phase Thermosyphon of Small Dimensions: a Review of the Experimental Results , 2012 .

[24]  Rahmatollah Khodabandeh,et al.  Instability, heat transfer and flow regime in a two-phase flow thermosyphon loop at different diameter evaporator channel , 2010 .

[25]  H.M.S. Hussein,et al.  Transient investigation of a two phase closed thermosyphon flat plate solar water heater , 2002 .

[26]  Jing Li,et al.  Performance evaluation of controllable separate heat pipes , 2016 .

[27]  Guiping Lin,et al.  Effect of non-condensable gas on steady-state operation of a loop thermosyphon , 2014 .

[28]  Aliakbar Akbarzadeh,et al.  The effects of non-condensable gases on the performance of loop thermosyphon heat exchangers , 2004 .

[29]  Yuebin Yu,et al.  Study on thermal performance of micro-channel separate heat pipe for telecommunication stations: experiment and simulation. , 2015 .

[30]  S. Chang,et al.  Thermal performance of sub-atmospheric two-phase loop thermosyphon at pitching and rolling conditions , 2014 .

[31]  Rahmatollah Khodabandeh,et al.  Thermal performance of a closed advanced two-phase thermosyphon loop for cooling of radio base stations at different operating conditions , 2004 .

[32]  Xianting Li,et al.  A seasonal cold storage system based on separate type heat pipe for sustainable building cooling , 2016 .

[33]  Zhang Hainan,et al.  Free cooling of data centers: A review , 2014 .

[34]  P. Vijayan,et al.  Study on the stability behaviour of two-phase natural circulation systems using a four-equation drift flux model , 2007 .

[35]  Pallippattu Krishnan Vijayan,et al.  A generalized flow correlation for two-phase natural circulation loops , 2006 .