Analyzing bond-deterioration during freeze-thaw exposure in cement-based repairs using non-destructive methods

[1]  P. Qiao,et al.  A thermal-hydraulic-mechanical coupling model for freezing process simulation of cementitious materials with entrained air voids , 2020 .

[2]  Rishi Gupta,et al.  Characterization of Enhanced ITZ in Engineered Polypropylene Fibers for Bond Improvement , 2020 .

[3]  J. Assaad,et al.  Qualitative assessment of interfacial bonding in 3D printing concrete exposed to frost attack , 2020 .

[4]  M. Issa,et al.  Dynamic- and Static-Elastic Moduli and Strength Properties of Early-Age Portland Cement Concrete Pavement Mixtures , 2020 .

[5]  Rishi Gupta,et al.  "Correlation of Electrical Conductivity, Compressive Strength, and Permeability of Repair Materials" , 2020, ACI Materials Journal.

[6]  Jian Hua Hu,et al.  Influence of Air Entraining Agent on Strength and Microstructure Properties of Cemented Paste Backfill , 2019, IEEE Access.

[7]  M. Johari,et al.  Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay , 2019, Construction and Building Materials.

[8]  Scott H. Smith,et al.  Service-life of concrete in freeze-thaw environments: Critical degree of saturation and calcium oxychloride formation , 2019, Cement and Concrete Research.

[9]  Luc Chouinard,et al.  Impulse response test for condition assessment of concrete: A review , 2019, Construction and Building Materials.

[10]  C. Zanotti,et al.  Concrete–Concrete Bond in Mode-I: A study on the Synergistic Effect of Surface Roughness and Fiber Reinforcement , 2019, Applied Sciences.

[11]  Norbert Randl,et al.  Are concrete-concrete bond tests comparable? , 2019, Cement and Concrete Composites.

[12]  Chenfei Wang,et al.  Durability of Polypropylene Fiber Concrete Exposed to Freeze-Thaw Cycles with Deicing Salts , 2019, Proceedings of the 2019 International Conference on Electronical, Mechanical and Materials Engineering (ICE2ME 2019).

[13]  P. Qiao,et al.  Durability of ultra-high performance concrete in tension under cold weather conditions , 2018, Cement and Concrete Composites.

[14]  Khashayar Ebrahimi,et al.  A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective , 2018, Construction and Building Materials.

[15]  Xingzhong Weng,et al.  Evaluation of the bond strength of a novel concrete for rapid patch repair of pavements , 2018, Construction and Building Materials.

[16]  T. Zhao,et al.  Effect of Air Entrainment on the Mechanical Properties, Chloride Migration, and Microstructure of Ordinary Concrete and Fly Ash Concrete , 2018, Journal of Materials in Civil Engineering.

[17]  Rishi Gupta,et al.  Sounding of subsurface concrete defects using frequency response of flexural vibration , 2018, Cement and Concrete Composites.

[18]  K. Maekawa,et al.  Multi-scale simulation of freeze-thaw damage to RC column and its restoring force characteristics , 2018 .

[19]  Ł. Sadowski.  Methodology of the assessment of the interlayer bond in concrete composites using NDT methods , 2018 .

[20]  A. Guettala,et al.  Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect) , 2017 .

[21]  X. Chang,et al.  Mesoscopic simulation of thermo-mechanical behaviors in concrete under frost action , 2017 .

[22]  Toyoharu Nawa,et al.  Mesoscopic damage model of concrete subjected to freeze-thaw cycles using mercury intrusion porosimetry and differential scanning calorimetry (MIP-DSC) , 2017 .

[23]  Suyun Ham,et al.  Acoustic evaluation of concrete delaminations using ball-chain impact excitation. , 2017, The Journal of the Acoustical Society of America.

[24]  Hongfa Yu,et al.  An equation for determining freeze-thaw fatigue damage in concrete and a model for predicting the service life , 2017 .

[25]  Luc Courard,et al.  On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis , 2017 .

[26]  A Torres,et al.  Mechanical behavior of concrete cold joints , 2016 .

[27]  K. Kurtis,et al.  Assessing the efficiency of entrained air voids for freeze-thaw durability through modeling , 2016 .

[28]  Dawei Zhang,et al.  Interfacial Tensile Bond between Substrate Concrete and Repairing Mortar under Freeze-Thaw Cycles , 2016 .

[29]  Jerzy Hoła,et al.  Evaluation of the height 3D roughness parameters of concrete substrate and the adhesion to epoxy resin , 2016 .

[30]  Min Wang,et al.  Research on the mechanism of polymer latex modified cement , 2016 .

[31]  Zhihui Sun,et al.  A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete , 2015 .

[32]  Łukasz Sadowski,et al.  Non-destructive identification of pull-off adhesion between concrete layers , 2015 .

[33]  Jacek Reiner,et al.  Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layers , 2015 .

[34]  Jueshi Qian,et al.  A method for assessing bond performance of cement-based repair materials , 2014 .

[35]  Jiang Jianhua,et al.  Analysis of damage development in cement paste due to ice nucleation at different temperatures , 2014 .

[36]  K. Fan,et al.  Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete , 2014 .

[37]  A. Çavdar.  Investigation of freeze–thaw effects on mechanical properties of fiber reinforced cement mortars , 2014 .

[38]  Eduardo Júlio,et al.  A modified slant shear test designed to enforce adhesive failure , 2013 .

[39]  A. Richardson,et al.  Freeze/thaw durability of concrete with synthetic fibre additions , 2012 .

[40]  Amin Akhavan Tabassi,et al.  Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strength , 2012 .

[41]  Farshad Rajabipour,et al.  Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars , 2012 .

[42]  Jerzy Hoła,et al.  Nondestructive identification of delaminations in concrete floor toppings with acoustic methods , 2011 .

[43]  Kefei Li,et al.  A study of freezing behavior of cementitious materials by poromechanical approach , 2011 .

[44]  Santosh G. Shah,et al.  Fracture Properties of Concrete–Concrete Interfaces Using Digital Image Correlation , 2011 .

[45]  P. Utgenannt,et al.  Experimental study of the material and bond properties of frost-damaged concrete , 2011 .

[46]  Cengiz Duran Atiş,et al.  The durability properties of polypropylene fiber reinforced fly ash concrete , 2011 .

[47]  J. M. Chandra Kishen,et al.  Fracture behavior of concrete–concrete interface using acoustic emission technique , 2010 .

[48]  Xianming Shi,et al.  Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar , 2009 .

[49]  Oreste S. Bursi,et al.  Bouc–Wen-Type Models with Stiffness Degradation: Thermodynamic Analysis and Applications , 2008, 0901.1448.

[50]  T C Powers,et al.  "A tribute to Theory of Volume Changes in Hardened Portland-Cement Paste during Freezing""""" , 2008, SP-249: Selected Landmark Paper Collection on Concrete Materials Research.

[51]  Jinying Zhu,et al.  Imaging Concrete Structures Using Air-Coupled Impact-Echo , 2007 .

[52]  S. R. Karade,et al.  Properties of polymer-modified mortars using epoxy and acrylic emulsions , 2007 .

[53]  D. Santos,et al.  A microstructural approach to adherence mechanism of poly(vinyl alcohol) modified cement systems to ceramic tiles , 2007 .

[54]  Andrzej Garbacz,et al.  On the ultrasonic assessment of adhesion between polymer coating and concrete substrate , 2006 .

[55]  P. Monteiro,et al.  Effect of Cryo-Suction and Air Void Transition Layer on Hydraulic Pressure of Freezing Concrete , 2006 .

[56]  P. K. Mehta,et al.  Concrete: Microstructure, Properties, and Materials , 2005 .

[57]  M. R. Ehsani,et al.  Comparison of Methods for Evaluating Bond Strength Between Concrete Substrate and Repair Materials , 2005 .

[58]  A. Richardson.  Polypropylene fibres in concrete with regard to durability , 2003 .

[59]  M. Mirza,et al.  Laboratory and field performance of polymer-modified cement-based repair mortars in cold climates , 2002 .

[60]  Wei Sun,et al.  Damage and damage resistance of high strength concrete under the action of load and freeze-thaw cycles , 1999 .

[61]  Mel Siegel,et al.  Correlation of accelerometer and microphone data in the "coin tap test" , 1999, IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309).

[62]  Gregory C. Frantz,et al.  FREEZE-THAW BOND DURABILITY OF RAPID-SETTING CONCRETE REPAIR MATERIALS , 1999 .

[63]  Mary Sansalone,et al.  IMPACT-ECHO STUDIES OF INTERFACIAL BOND QUALITY IN CONCRETE: PART II--EFFECTS OF BOND TENSILE STRENGTH , 1996 .

[64]  Mary Sansalone,et al.  Impact-Echo Studies of Interfacial Bond Quality inConcrete: Part l-Effects of Unbonded Fraction of Area , 1996 .

[65]  Daniel Cusson,et al.  DURABILITY OF REPAIR MATERIALS , 1996 .

[66]  D. R. Morgan,et al.  Compatibility of concrete repair materials and systems , 1996 .

[67]  Allen G. Davis,et al.  Nondestructive testing of concrete chimneys and other structures , 1995, Smart Structures.

[68]  L. E. Kukacka,et al.  Strength and durability of polypropylene fibre reinforced grouts , 1995 .

[69]  A. M. Hammad,et al.  Correlation between crack tortuosity and fracture toughness in cementitious material , 1993 .

[70]  Olivier Coussy,et al.  A general theory of thermoporoelastoplasticity for saturated porous materials , 1989 .

[71]  Jerzy Hoła,et al.  Pull-off adhesion prediction of variable thick overlay to the substrate , 2018 .

[72]  P. Monteiro,et al.  Poroelastic model for concrete exposed to freezing temperatures , 2008 .

[73]  Jay L. Devore,et al.  Probability and statistics for engineering and the sciences , 1982 .

[74]  T. Powers,et al.  THE AIR REQUIREMENT OF FROST RESISTANT CONCRETE , 1950 .

[75]  T. Powers.  A Working Hypothesis for Further Studies of Frost Resistance of Concrete , 1945 .

[76]  Stephen P. Timoshenko,et al.  Vibration problems in engineering , 1928 .