Results of a 200 hours lifetime test of a 7 kW Hybrid–Power fuel cell system on electric forklifts

Abstract Five prototype fuel cell hybrid–drive electric forklifts were built, and laboratory tests were used to confirm that they could function in a real warehouse environment. The electric forklifts were delivered to Far Eastern Group’s Taoyuan, Taiwan A–mart supermarket warehouse for 200 h of operational testing. Each vehicle’s hybrid–drive system included a 2.7 kW proton exchange membrane fuel cell stack and two auxiliary power sources, each composed of a lithium battery and supercapacitors in parallel. The components of the drive system could supply 7 kW of power. The system’s potential advantages are low cost and high working flexibility. To collect sufficient data and determine whether this fuel cell hybrid–drive electric forklifts design could function in an actual warehouse environment, an initial test period of 200 h was considered. The vehicles were operated from 8:00–22:00 with 4–5 h of peak operating time.

[1]  M. Ulsh,et al.  Manufacturing Readiness Assessment for Fuel Cell Stacks and Systems for the Back-up Power and Material Handling Equipment Emerging Markets (Revised) , 2010 .

[2]  G. Correa,et al.  A comparative energy and environmental analysis of a diesel, hybrid, hydrogen and electric urban bus , 2019, Energy.

[3]  B. Popov,et al.  Effect of cathode GDL characteristics on mass transport in PEM fuel cells , 2009 .

[4]  Gao Haibo,et al.  Optimization of sizing and frequency control in battery/supercapacitor hybrid energy storage system for fuel cell ship , 2020 .

[5]  Junghui Chen,et al.  Prognostics of PEM fuel cells based on Gaussian process state space models , 2018 .

[6]  Yujie Wang,et al.  A comparative study of power allocation strategies used in fuel cell and ultracapacitor hybrid systems , 2019 .

[7]  K. Mahadevan,et al.  Identification and Characterization of Three Near-Term Direct Hydrogen PEM Fuel Cell Markets , 2007 .

[8]  Ho Ting Luk,et al.  Techno-economic Analysis of Distributed Hydrogen Production from Natural Gas , 2012 .

[9]  I. Dincer,et al.  Assessment of a new integrated solar energy system for hydrogen production , 2014 .

[10]  Emmanuel Kakaras,et al.  Investigation of technical and economic aspects for methanol production through CO2 hydrogenation , 2016 .

[11]  Qi Li,et al.  Development of energy management system based on a power sharing strategy for a fuel cell-battery-supercapacitor hybrid tramway , 2015 .

[12]  Mehmet Uzunoglu,et al.  Load sharing using fuzzy logic control in a fuel cell/ultracapacitor hybrid vehicle , 2009 .

[13]  Faouzi Bacha,et al.  Energy management and control strategy for a DFIG wind turbine/fuel cell hybrid system with super capacitor storage system , 2020 .

[14]  Aman Verma,et al.  Greenhouse gas abatement costs of hydrogen production from underground coal gasification , 2015 .

[15]  A. Mayyas,et al.  Fuel Cell Forklift Deployment in the USA , 2016 .

[16]  Abdul-Ghani Olabi,et al.  Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply , 2010 .

[17]  Zonghai Chen,et al.  Multi-timescale power and energy assessment of lithium-ion battery and supercapacitor hybrid system using extended Kalman filter , 2018, Journal of Power Sources.

[18]  T. Ramsden.  Evaluation of the Total Cost of Ownership of Fuel Cell-Powered Material Handling Equipment , 2013 .

[19]  Jenn-Jiang Hwang,et al.  Review on development and demonstration of hydrogen fuel cell scooters , 2012 .

[20]  Azah Mohamed,et al.  A review on energy management system for fuel cell hybrid electric vehicle: Issues and challenges , 2015 .

[21]  Luis M. Fernández,et al.  Hybrid fuel cell and battery tramway control based on an equivalent consumption minimization strategy , 2011 .

[22]  Jennifer Bauman,et al.  A Comparative Study of Fuel-Cell–Battery, Fuel-Cell–Ultracapacitor, and Fuel-Cell–Battery–Ultracapacitor Vehicles , 2008, IEEE Transactions on Vehicular Technology.

[23]  Martin Kumar Patel,et al.  Techno-economic and environmental assessment of stationary electricity storage technologies for different time scales , 2017 .

[24]  Yao Wang,et al.  Energy management strategy development of a forklift with electric lifting device , 2017 .

[25]  F. Weng,et al.  Analyses of reversible solid oxide cells porosity effects on temperature reduction , 2020 .

[26]  Joao P. Trovao,et al.  A multi-level energy management system for multi-source electric vehicles – An integrated rule-based meta-heuristic approach , 2013 .

[27]  Clemente Capasso,et al.  Dynamic behaviour of Li batteries in hydrogen fuel cell power trains , 2011 .

[28]  Cordellia Sita,et al.  Performance of electric forklift with low-temperature polymer exchange membrane fuel cell power module and metal hydride hydrogen storage extension tank , 2016 .

[29]  Saad Mekhilef,et al.  Comparative study of different fuel cell technologies , 2012 .

[30]  Liejin Guo,et al.  Industrialization prospects for hydrogen production by coal gasification in supercritical water and novel thermodynamic cycle power generation system with no pollution emission , 2015 .

[31]  Zhixiang Liu,et al.  Numerical simulation for rib and channel position effect on PEMFC performances , 2010 .

[32]  A. Prasad,et al.  Performance simulation and analysis of a fuel cell/battery hybrid forklift truck , 2013 .

[33]  Tianyu Li,et al.  Predictive energy management of fuel cell supercapacitor hybrid construction equipment , 2018 .

[34]  J.A.M. Bleijs,et al.  An overview of DC–DC converter topologies for fuel cell-ultracapacitor hybrid distribution system , 2015 .

[35]  Bong-Jin Gim,et al.  Analysis of the economy of scale and estimation of the future hydrogen production costs at on-site hydrogen refueling stations in Korea , 2012 .

[36]  K. Ghedamsi,et al.  Energy management and fault tolerant control strategies for fuel cell/ultra-capacitor hybrid electric vehicles to enhance autonomy, efficiency and life time of the fuel cell system , 2015 .

[37]  Xin-Jian Zhu,et al.  A hybrid multi-variable experimental model for a PEMFC , 2007 .

[38]  Jianqiu Li,et al.  Multi-mode control strategy for fuel cell electric vehicles regarding fuel economy and durability , 2014 .

[39]  Josef Kallo,et al.  Fuel cell and Li-ion battery direct hybridization system for aircraft applications , 2013 .

[40]  T. Sakai,et al.  R&d on metal hydride materials and Ni-MH batteries in Japan , 1999 .

[41]  A. Lewandowski,et al.  Practical and theoretical limits for electrochemical double-layer capacitors , 2007 .

[42]  Ay Su,et al.  Development of a small vehicular PEM fuel cell system , 2008 .

[43]  Ottorino Veneri,et al.  Experimental investigation into the effectiveness of a super-capacitor based hybrid energy storage system for urban commercial vehicles , 2017, Applied Energy.

[44]  Ozan Erdinc,et al.  Recent trends in PEM fuel cell-powered hybrid systems: Investigation of application areas, design architectures and energy management approaches , 2010 .

[45]  Jianqiu Li,et al.  Development and performance analysis of a hybrid fuel cell/battery bus with an axle integrated electric motor drive system , 2016 .

[46]  Philippe Menanteau,et al.  An economic analysis of the production of hydrogen from wind-generated electricity for use in transport applications , 2011 .

[47]  G. Liejin,et al.  Industrialization prospects for hydrogen production by coal gasification in supercritical water and novel thermodynamic cycle power generation system with no pollution emission , 2015 .

[48]  Frank Kreith,et al.  Fallacies of a Hydrogen Economy: A Critical Analysis of Hydrogen Production and Utilization , 2004 .

[49]  Inmaculada Zamora,et al.  Influence of the rated power in the performance of different proton exchange membrane (PEM) fuel cells , 2010 .

[50]  Supaporn Therdthianwong,et al.  Cathode catalyst layer design for proton exchange membrane fuel cells , 2012 .

[51]  J. Viitakangas,et al.  Development of integrated fuel cell hybrid power source for electric forklift , 2011 .

[52]  Zonghai Chen,et al.  Modeling and state-of-charge prediction of lithium-ion battery and ultracapacitor hybrids with a co-estimator , 2017 .

[53]  T. Taner.  Energy and exergy analyze of PEM fuel cell: A case study of modeling and simulations , 2018 .

[54]  Dawei Shi,et al.  Compound control for energy management of the hybrid ultracapacitor-battery electric drive systems , 2019 .

[55]  S. Dusmez,et al.  Fuel cell and ultra-capacitor hybridization: A prototype test bench based analysis of different energy management strategies for vehicular applications , 2010 .

[56]  Jenn-Jiang Hwang,et al.  HEAT-TRANSFER IN A RECTANGULAR CHANNEL WITH PERFORATED TURBULENCE PROMOTERS USING HOLOGRAPHIC-INTERFEROMETRY MEASUREMENT , 1995 .

[57]  Rayhane Koubaa,et al.  Double layer metaheuristic based energy management strategy for a Fuel Cell/Ultra-Capacitor hybrid electric vehicle , 2017 .

[58]  Hassan Fathabadi,et al.  Fuel cell/back-up battery hybrid energy conversion systems: Dynamic modeling and harmonic considerations , 2015 .

[59]  Ye. V. Klochko,et al.  Metal hydride hydrogen storage and supply systems for electric forklift with low-temperature proton exchange membrane fuel cell power module , 2016 .

[60]  A. Aktaş,et al.  A novel optimal energy management strategy for offshore wind/marine current/battery/ultracapacitor hybrid renewable energy system , 2020 .

[61]  Amit Kumar,et al.  Techno-economic assessment of hydrogen production from underground coal gasification (UCG) in Western Canada with carbon capture and sequestration (CCS) for upgrading bitumen from oil sands , 2013 .

[62]  Noureddine Settou,et al.  Estimation of Hydrogen Production Using Wind Energy in Algeria , 2015 .

[63]  Amiya K. Jana,et al.  Sliding mode observer based nonlinear control of a PEMFC integrated with a methanol reformer , 2017 .

[64]  Luis M. Fernández,et al.  Hybrid electric system based on fuel cell and battery and integrating a single dc/dc converter for a tramway , 2011 .