Aeroelastic analysis of a shipboard helicopter rotor with ship motions during engagement and disengagement operations

Abstract An aeroelastic simulation of a shipboard helicopter rotor with ship motions during engagement and disengagement operations is investigated to explore the coupled dynamic behavior between the rotor and the ship. A finite element analysis based on a moderate deflection beam model is employed to capture the flap, lag and torsion deflections of the rotor blade. The ship is treated as a six-degree-of-freedom rigid body. By using the Hamiltonʼs principle, system equations of motion are derived based on the generalized force formulation. The responses agree well with the test data of the rotor blade droop stop impact and the transient aeroelastic response of the shipboard teetering model rotor. Parametric investigations illustrate that the ship pitch motion has significant influence on the maximum negative displacement of the blade tip. Additional over 25% increase of the tip deflection can be introduced by the ship pitch motion. The aerodynamic and inertial couplings between the ship motion and the rotor have significantly nonlinear influence on the transient aeroelastic response. Both terms should be taken into account in the coupled helicopter–ship dynamics model.

[1]  Edward C. Smith,et al.  Lagwise Loads Analysis of a Rotor Blade with an Embedded Chordwise Absorber , 2009 .

[2]  Fred F. Afagh,et al.  Modeling Helicopter Blade Sailing: Dynamic Formulation in the Planar Case , 2007 .

[3]  Edward C. Smith,et al.  Active Control of Gimballed Rotors Using Swashplate Actuation During Shipboard Engagement Operations , 2003 .

[4]  Y.-M. Cheng,et al.  Aeroelastic response of a coupled rotor/fuselage system in hovering and forward flight , 1999 .

[5]  Edward C. Smith,et al.  EXPERIMENTAL/THEORETICAL CORRELATION OF ANALYSIS FOR HELICOPTER ROTOR BLADE/DROOP STOP IMPACTS , 1997 .

[6]  Edward C. Smith,et al.  Aeroelastic Analysis of Transient Blade Dynamics During Shipboard Engage/Disengage Operations , 1998 .

[7]  Fred F. Afagh,et al.  Modeling Helicopter Blade Sailing: Dynamic Formulation and Validation , 2008 .

[8]  R. Bhattacharyya.  Dynamics of Marine Vehicles , 1978 .

[9]  F. K. Straub,et al.  Advance finite element modeling of rotor blade aeroelasticity , 1994 .

[10]  Earl H. Dowell,et al.  Nonlinear equations of motion for the elastic bending and torsion of twisted nonuniform rotor blades , 1974 .

[11]  S. J. Newman,et al.  The verification of a theoretical helicopter rotor blade sailing method by means of windtunnel testing , 1995, The Aeronautical Journal (1968).

[12]  Edward C. Smith,et al.  Experimental and Theoretical Correlation of Helicopter Rotor Blade-Droop Stop Impacts , 1999 .

[13]  Hao,et al.  Modeling and Simulation of Rotor Engagement and Disengagement During Shipboard Operations , 2004 .

[14]  D. Owen,et al.  Finite elements in plasticity : theory and practice , 1980 .

[15]  Olivier A. Bauchau,et al.  Multibody Modeling of Engage and Disengage Operations of Helicopter Rotors , 2001 .

[16]  Jonathan Allen Keller,et al.  Analysis and Control of the Transient Aeroelastic Response of Rotors During Shipboard Engagement and Disengagement Operations , 2001 .