Effects of pre-existing discontinuities on the residual strength of rock mass – Insight from a discrete element method simulation

Abstract When rock failure is unavoidable, the designer of engineering structures must know and account for the residual strength of the rock mass. This is particularly relevant in underground coal mine openings. Pre-existing discontinuities play an important role in the mechanical behavior of rock masses and thus it is important to understand the effects of such pre-existing discontinuities on the residual strength. For this purpose, the present study demonstrates a numerical analysis using a discrete element method simulation. The numerical results indicate that fracture intensity has no significant influence on the residual strength of jointed rock masses, independent of confining conditions. As confining pressures increase, both peak and residual strengths increase, with residual strength increasing at a faster rate. The finding was further demonstrated by analyzing documented laboratory compressive test data from a variety of rocks along with field data from coal pillars. A comprehensive interpretation of the finding was conducted using a cohesion-weakening-friction-strengthening (CWFS) model. The effect of rock bolts on rock mass strength was also evaluated by using a discrete element method model which suggested that rock bolts can significantly increases residual strength but have limited effect on increasing the peak strength of rock masses.

[1]  Bruce Hebblewhite,et al.  Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression , 2013 .

[2]  Doug Stead,et al.  The application of a modified Voronoi logic to brittle fracture modelling at the laboratory and field scale , 2014 .

[3]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[4]  P. A. Cundall,et al.  A Synthetic Rock Mass Model For Jointed Rock , 2007 .

[5]  N. A. Chandler,et al.  The progressive fracture of Lac du Bonnet granite , 1994 .

[6]  Doug Stead,et al.  Discrete element modelling of deformation and damage of a roadway driven along an unstable goaf — A case study , 2014 .

[7]  Jian Zhao,et al.  Micromechanical parameters in bonded particle method for modelling of brittle material failure , 2010 .

[8]  Diego Mas Ivars,et al.  Quantifying the Size Effect of Rock Mass Strength , 2008 .

[9]  R. Ribacchi,et al.  Mechanical Tests on Pervasively Jointed Rock Material: Insight into Rock Mass Behaviour , 2000 .

[10]  Z. T. Bieniawski,et al.  In situ strength and deformation characteristics of coal , 1968 .

[11]  V. Hajiabdolmajid,et al.  Modelling brittle failure of rock , 2002 .

[12]  Xianfeng Liu,et al.  Strength of an Australian Coal Under Low Confinement , 2014, Rock Mechanics and Rock Engineering.

[13]  Navid Bahrani,et al.  Distinct element method simulation of an analogue for a highly interlocked, non-persistently jointed rockmass , 2014 .

[14]  F. Donze,et al.  Modelling progressive failure in fractured rock masses using a 3D discrete element method , 2012 .

[15]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[16]  P. K. Kaiser,et al.  Determination of residual strength parameters of jointed rock masses using the GSI system , 2007 .

[17]  Lianyang Zhang,et al.  Study of scale effect on intact rock strength using particle flow modeling , 2011 .

[18]  W. L. van Heerden,et al.  In situ complete stress-strain characteristics of large coal specimens , 1975 .

[19]  Brijes Mishra,et al.  Experimental investigation of the effect of change in control modes on the post-failure behavior of coal and coal measures rock , 2013 .

[20]  Liu Jianfeng.  INVESTIGATION ON FAILURE MECHANISMS AND MECHANICAL BEHAVIORS OF DEEP COAL-ROCK SINGLE BODY AND COMBINED BODY , 2011 .

[21]  I. F. Öge,et al.  Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin , 2014, Rock Mechanics and Rock Engineering.

[22]  Z. Yonghui.  STUDY ON POST-PEAK MECHANICAL BEHAVIOUR AND STRAIN-SOFTENING MODEL OF THREE GORGES GRANITE , 2008 .

[23]  E. T. Brown,et al.  A study of the mechanical behaviour of coal for pillar design , 1998 .

[24]  C. Fairhurst,et al.  Fracture network engineering for hydraulic fracturing , 2011 .

[25]  F. Rummel,et al.  Effect of confining pressure on the fracture behaviour of a porous rock , 1980 .

[26]  Mark S. Diederichs,et al.  A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement , 2015, Rock Mechanics and Rock Engineering.

[27]  John A. Hudson,et al.  Engineering rock mechanics , 1997 .

[28]  K. G. Sharma,et al.  Post-peak response of some metamorphic rocks of India under high confining pressures , 2010 .

[29]  John A. Hudson,et al.  Rock Mechanics Principles in Engineering Practice , 1989 .

[30]  J. Liao,et al.  Mechanics and response of a surface rock block subjected to pressure fluctuations: A plucking model and its application , 2014 .

[31]  Doug Stead,et al.  Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach , 2014 .

[32]  O. K. Mahabadi,et al.  Y-GUI: A graphical user interface and pre-processor for the combined finite-discrete element code, Y2D, incorporating material heterogeneity , 2010, Comput. Geosci..

[33]  M. Grenon,et al.  Quantifying the impact of small variations in fracture geometric characteristics on peak rock mass properties at a mining project using a coupled DFN–DEM approach , 2014 .

[34]  Bo-Hyun Kim,et al.  Rock mass strength at depth and implications for pillar design , 2011 .

[35]  John Hadjigeorgiou,et al.  Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine , 2010 .

[36]  M. Board,et al.  UDEC simulation of Triaxial Testing of Lithophysal Tuff , 2004 .

[37]  K. Takeuchi,et al.  Back analysis of measured displacements of tunnels , 1983 .

[38]  Abdelkareem M. Alzo'ubi,et al.  The effect of tensile strength on the stability of rock slopes , 2009 .

[39]  A. Wilson,et al.  The stability of underground workings in the soft rocks of the Coal Measures , 1983 .

[40]  Diego Mas Ivars,et al.  The synthetic rock mass approach for jointed rock mass modelling , 2011 .

[41]  Shanyong Wang,et al.  Experimental Investigation on the Strength, Deformability, Failure Behavior and Acoustic Emission Locations of Red Sandstone Under Triaxial Compression , 2012, Rock Mechanics and Rock Engineering.

[42]  M. Cai,et al.  Fracture Initiation and Propagation in a Brazilian Disc with a Plane Interface: a Numerical Study , 2013, Rock Mechanics and Rock Engineering.

[43]  Z. T. Bieniawski,et al.  The effect of specimen size on compressive strength of coal , 1968 .

[44]  C. Lambert,et al.  Discrete modeling of rock joints with a smooth-joint contact model , 2014 .

[45]  Peter K. Kaiser,et al.  Numerical simulation of cumulative damage and seismic energy release during brittle rock failure-Part I: Fundamentals , 1998 .

[46]  Chen Haimin.  POST-PEAK STRAIN SOFTENING MECHANICAL PROPERTIES OF WEAK ROCK , 2010 .

[47]  Tai-Tien Wang,et al.  Modeling the anisotropic behavior of jointed rock mass using a modified smooth-joint model , 2013 .

[48]  T. Kazerani,et al.  Effect of micromechanical parameters of microstructure on compressive and tensile failure process of rock , 2013 .

[49]  M. Amin,et al.  Verification of post failure behaviour of rock using closed-circuit servo-controlled testing machine , 2008 .