Instrumentation and manufacture of a smart composite bridge for short-span applications

A smart composite bridge is described that features an all-composite design and an integral sensor network. This short-span structure is nine meters in length and is designed for an AASHTO H20 highway load rating. The prototype bridge, the first full-composite bridge in Missouri, was installed on the University of Missouri-Rolla campus as a field laboratory for smart structures courses and a demonstration of composite technology. It was designed, analyzed, and manufactured as a cooperative product development among university, industry, and government partners. It has a modular construction based on a pultruded 76-mm-square composite tube. The cross section of the overall structural element is an I-beam formed by seven layers of bonded tubes. The top and bottom layers are carbon/vinyl-ester tubes for strength and the other layers are glass/vinyl-ester tubes for economy. Extrinsic Fabry-Perot interferometric fiber-optic sensors were embedded throughout to measure temperature, flexure strain, and shear strain. Also, radio-frequency identification tags were co-located with sensors to aid in determining load placement during field tests. This paper gives an overview of the project emphasizing the smart instrumentation. In particular, the installation of the integral sensors, the plan for the sensor network, and preliminary strain results for vehicle loading are discussed.

[1]  Martha J. Molander.  Instrumentation of a smart composite bridge , 2001 .

[2]  Richard W. Griffiths.  Structural integrity monitoring of bridges using fiber optics , 1995, Smart Structures.

[3]  Alan D. Kersey,et al.  Fiber optic sensors in concrete structures: a review , 1996 .

[4]  Jr. W.B. Spillman,et al.  Sensing and processing for smart structures , 1996, Proc. IEEE.

[5]  Raymond M. Measures,et al.  A structurally integrated Bragg grating laser sensing system for a carbon fiber prestressed concrete highway bridge , 1995 .

[6]  Raymond M. Measures,et al.  Development of a fiber Fabry-Perot strain gauge , 1991, Other Conferences.

[7]  Daniele Inaudi,et al.  Structural monitoring by curvature analysis using interferometric fiber optic sensors , 1998 .

[8]  Eric Udd,et al.  Fiber optic smart structures , 1993, Optics East.

[9]  Raymond M. Measures,et al.  Advances toward fiber optic based smart structures [also Erratum 31(4) 861-862 (Apr1992)] , 1992 .

[10]  Peter L. Fuhr,et al.  Embedded fiber optic sensors for bridge deck chloride penetration measurement , 1998 .

[11]  R O Claus,et al.  Quadrature phase-shifted, extrinsic Fabry-Perot optical fiber sensors. , 1991, Optics letters.

[12]  D R Huston,et al.  Intelligent civil structures-activities in Vermont , 1994 .

[13]  Inderjit Chopra,et al.  Review of current status of smart structures and integrated systems , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[14]  Max B. Reid,et al.  Temperature dependence of fiber optic Bragg gratings at low temperatures , 1998 .

[15]  E. H. Linfoot.  Principles of Optics , 1961 .

[16]  David A. Jackson,et al.  Simple fiber-optic Fabry-Perot sensor , 1983 .

[17]  A. Mendez,et al.  Applications Of Embedded Optical Fiber Sensors In Reinforced Concrete Buildings And Structures , 1990, Other Conferences.

[18]  James S. Sirkis,et al.  Phase-strain-temperature model for structurally embedded interferometric optical fiber strain sensors with applications , 1991, Other Conferences.

[19]  H. Taylor,et al.  Railroad bridge instrumentation with fiber-optic sensors. , 1999 .

[20]  David A. Jackson,et al.  A simple fibre Fabry-Perot sensor , 1983 .

[21]  W Lee,et al.  Railroad bridge instrumentation with fiber-optic sensors. , 1999, Applied optics.

[22]  Richard O. Claus,et al.  TECHNICAL NOTE: Geometric analysis of optical fiber EFPI sensor performance , 1998 .

[23]  Richard O. Claus,et al.  Performance of embedded short-gage-length optical fiber sensors in a fatigue-loaded reinforced concrete specimen , 1995 .

[24]  Toshihiko Yoshino,et al.  Fiber-Optic Fabry-Perot Interferometer and its Sensor Applications , 1982 .

[25]  Alan D. Kersey,et al.  Multiplexed Bragg grating optical fiber sensors for damage evaluation in highway bridges , 1998 .

[26]  Ahmet E. Aktan,et al.  Issues in health monitoring for intelligent infrastructure , 1998 .

[27]  Luc Taerwe,et al.  FRP reinforcement for concrete structures , 1999 .

[28]  Farhad Ansari.  International Workshop on Fiber Optic Sensors for Construction Materials and Bridges , 1999 .

[29]  Kent A. Murphy,et al.  Low-profile fibers for embedded smart structure applications , 1991, Other Conferences.

[30]  Kent A. Murphy,et al.  Low-profile fibers for embedded smart structure applications , 1994, Other Conferences.

[31]  David W. Jensen,et al.  Dynamic Strain Sensing of a Composite Lattice with an Integrated Optical Fiber , 1991 .

[32]  Brian Culshaw,et al.  Smart structures and applications in civil engineering , 1996, Proc. IEEE.

[33]  K. Chandrashekhara,et al.  Measurement and analysis of impact-induced strain using extrinsic Fabry-Pérot fiber optic sensors , 1998 .