Modeling of Heat Transfer and Fluid Flow in the Laser Multilayered Cladding Process

[1]  J. Mazumder,et al.  Temperature and composition profile during double-track laser cladding of H13 tool steel , 2010 .

[2]  Hyoung-Keun Lee.  Effects of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding , 2008 .

[3]  H. K. D. H. Bhadeshia,et al.  Mathematical models in materials science , 2008 .

[4]  E. Toyserkani,et al.  Deposition of Co–Ti alloy on mild steel substrate using laser cladding , 2007 .

[5]  R. Kovacevic,et al.  Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance , 2007 .

[6]  J. Choi,et al.  Deposition Pattern Based Thermal Stresses in Single-Layer Laser Aided Direct Material Deposition Process , 2007 .

[7]  Jyoti Mazumder,et al.  Transport phenomena during direct metal deposition , 2007 .

[8]  Fanrong Kong,et al.  Numerical simulation of multiphase transient field during plasma deposition manufacturing , 2006 .

[9]  M. Brandt,et al.  Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process , 2006 .

[10]  Lijun Han,et al.  Modeling and Experiments of Laser Cladding With Droplet Injection , 2005 .

[11]  F. Liou,et al.  Modeling of laser cladding with powder injection , 2004 .

[12]  G. Śliwiński,et al.  Temperature distribution in laser-clad multi-layers , 2004 .

[13]  E. Toyserkani,et al.  3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process , 2004 .

[14]  M. Rohde,et al.  Experimental and Numerical Investigations of Heat and Mass Transport in Laser-Induced Modification of Ceramic Surfaces , 2003 .

[15]  R. Kovacevic,et al.  Modelling and measuring the thermal behaviour of the molten pool in closed-loop controlled laser-based additive manufacturing , 2003 .

[16]  R. Komanduri,et al.  Thermal analysis of the laser surface transformation hardening process , 2001 .

[17]  S. Osher,et al.  A Simple Level Set Method for Solving Stefan Problems , 1997, Journal of Computational Physics.

[18]  M. Pons,et al.  Carbide-reinforced coatings on AISI 316 L stainless steel by laser surface alloying , 1995 .

[19]  Michel Rappaz,et al.  A thermal model of laser cladding by powder injection , 1992 .

[20]  W. Steen.  Laser Material Processing , 1991 .

[21]  F. Incropera,et al.  An Experimental Investigation of Binary Solidification in a Vertical Channel With Thermal and Solutal Mixed Convection , 1989 .

[22]  J. Mazumder,et al.  One‐dimensional diffusion model for extended solid solution in laser cladding , 1987 .

[23]  S. Papson,et al.  “Model” , 1981 .

[24]  G T Polley,et al.  Heat transfer and fluid flow , 1976 .

[25]  A. Götte,et al.  Metall , 1897 .

[26]  Knut Partes,et al.  Modulation of power density distribution in time and space for high speed laser cladding , 2008 .

[27]  Jianguo Li,et al.  Interaction between laser beam and powder stream in the process of laser cladding with powder feeding , 2004 .

[28]  L. Lim,et al.  Parametric studies of laser cladding processes , 1997 .