Reliability based assessment of axial pile bearing capacity: static analysis, SPT and CPT-based methods

ABSTRACT Since piles are one of the major geotechnical foundation systems, estimation of their axial bearing capacity is of great importance. Employing different design methods, resulting in a wide range of bearing capacity estimations, complicates the selection of an appropriate design scheme and confirms the existence of model error along with the inherent soil variability in bearing capacity prediction. This paper tends to evaluate different predictive methods in Reliability-Based Design (RBD) framework. In this regard, different static analyses, SPT and CPT-based methods are considered to evaluate which approaches collectively and which method individually, have more reliable predictions for compiled data bank. In order to assess reliability indices and resistance factors, two approaches have been considered, i.e. First Order Second Moment method (FOSM) and First Order Reliability Method (FORM). To investigate the reliability indices for different methods in both RBD approaches, various safety factors and loading ratios have been considered. Also, the Load and Resistance Factor Design (LRFD) resistance factors are calibrated for different target reliability indices and loading ratios. Results show that CPT-based methods are more reliable among other methods. Furthermore, the estimated efficiency ratio, i.e. the ratio of resistance factor to resistance bias factor, confirms this agreement.

[1]  Abolfazl Eslami,et al.  Evaluating CPT and CPTu based pile bearing capacity estimation methods using Urmiyeh Lake Causeway piling records , 2011 .

[2]  Farrel Zwerneman,et al.  22nd Edition of API RP 2A Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms – Working Stress Design , 2010 .

[3]  A. Eslami,et al.  Characterization of the correlation structure of residual CPT profiles in sand deposits , 2013 .

[4]  G G Mayerhof,et al.  Bearing Capacity and Settlement of Pile Foundations , 1976 .

[5]  Jean-Louis Briaud,et al.  MEASURED AND PREDICTED AXIAL RESPONSE OF 98 PILES , 1988 .

[6]  Abolfazl Eslami,et al.  Pile capacity by direct CPT and CPTu methods applied to 102 case histories , 1997 .

[7]  K. Phoon,et al.  Characterization of Geotechnical Variability , 1999 .

[8]  Sara Moshfeghi,et al.  Study on pile ultimate capacity criteria and CPT-based direct methods , 2018 .

[9]  F. L. Beringen,et al.  Pile foundations for large North Sea structures , 1979 .

[10]  John H. Schmertmann,et al.  GUIDELINES FOR CONE PENETRATION TEST. (PERFORMANCE AND DESIGN) , 1978 .

[11]  Ivan M. Viest,et al.  Load and Resistance Factor Design , 1981 .

[12]  G. G. Meyerhof.  Scale Effects of Ultimate Pile Capacity , 1983 .

[13]  Wilson H. Tang,et al.  REDUCING UNCERTAINTY OF PREDICTION FROM EMPIRICAL CORRELATIONS , 2004 .

[14]  Jungwon Huh,et al.  Reliability-based calibration of resistance factors for static bearing capacity of driven steel pipe piles , 2010 .

[15]  J M Duncan,et al.  MANUALS FOR THE DESIGN OF BRIDGE FOUNDATIONS: SHALLOW FOUNDATIONS, DRIVEN PILES, RETAINING WALLS AND ABUTMENTS, DRILLED SHAFTS, ESTIMATING TOLERABLE MOVEMENTS, AND LOAD FACTOR DESIGN SPECIFICATIONS AND COMMENTARY , 1991 .

[16]  Fawad S. Niazi.  Static axial pile foundation response using seismic piezocone data , 2014 .

[17]  M. Jefferies,et al.  Use of CPTu to Estimate Equivalent SPT N60 , 1993 .

[18]  Michael McVay,et al.  LOAD AND RESISTANCE FACTOR DESIGN (LRFD) FOR DEEP FOUNDATIONS , 2004 .

[19]  K. Phoon,et al.  Characterisation of model uncertainties for laterally loaded rigid drilled shafts , 2005 .

[20]  J Biarez,et al.  BEARING CAPACITY AND SETTLEMENT OF PILE FOUNDATIONS , 1977 .

[21]  Abolfazl Eslami,et al.  Efficiency of methods for determining pile axial capacity-applied to 70 cases histories in Persian Gulf northern shore , 2014 .

[22]  A. Eslami,et al.  Non-stationary realisation of CPT data: considering lithological and inherent heterogeneity , 2018 .

[23]  C. H. Juang,et al.  Reliability-based code revision for design of pile foundations: Practice in Shanghai, China , 2015 .

[24]  Mohammed A. Gabr,et al.  Reliability based calibration of resistance factors for axial capacity of driven piles , 2005 .

[25]  G. R. Reuter.  Pile capacity prediction in Minnesota soils using direct CPT and CPTu methods , 2010 .

[26]  R. Jamshidi Chenari,et al.  RELIABILITY MEASURES FOR CONSOLIDATION SETTLEMENT BY MEANS OF CPT DATA , 2014 .

[27]  Anand J. Puppala,et al.  Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits , 2012 .

[28]  Tony M. Allen,et al.  Development of Geotechnical Resistance Factors and Downdrag Load Factors for LRFD Foundation Strength Limit State Design Reference Manual , 2005 .

[29]  Reza Jamshidi Chenari,et al.  Effects of anisotropy in correlation structure on the stability of an undrained clay slope , 2015 .

[30]  A. R. Bazaraa,et al.  N-Values Used to Predict Settlements of Piles in Egypt , 1986 .

[31]  Mark Randolph,et al.  SCIENCE AND EMPIRICISM IN PILE FOUNDATION DESIGN , 2003 .

[32]  Achintya Haldar,et al.  Probability, Reliability and Statistical Methods in Engineering Design (Haldar, Mahadevan) , 1999 .

[33]  C.R.I. Clayton,et al.  The standard penetration test (SPT): methods and use , 1995 .

[34]  Johan V. Retief,et al.  Characterization of Model Uncertainty in the Static Pile Design Formula , 2011 .

[35]  Murad Y. Abu-Farsakh,et al.  Assessment of Direct Cone Penetration Test Methods for Predicting the Ultimate Capacity of Friction Driven Piles , 2004 .

[36]  Donald E. Myers,et al.  Reliability and Statistics in Geotechnical Engineering , 2005, Technometrics.

[37]  Fred H. Kulhawy,et al.  Manual on estimating soil properties for foundation design , 1990 .

[38]  D. V. Griffiths,et al.  Risk Assessment in Geotechnical Engineering , 2008 .

[39]  Kok-Kwang Phoon,et al.  Evaluation of Geotechnical Property Variability , 1999 .

[40]  R. Chenari,et al.  Generating non-stationary random fields of auto-correlated, normally distributed CPT profile by matrix decomposition method , 2015 .

[41]  Peter K. Robertson,et al.  Cone-penetration testing in geotechnical practice , 1997 .

[42]  Yu Wang.  Reliability-Based Economic Design Optimization of Spread Foundations , 2009 .

[43]  R. Rackwitz,et al.  Structural reliability under combined random load sequences , 1978 .

[44]  John T. Christian,et al.  Geotechnical Engineering Reliability: How Well Do We Know What We Are Doing? , 2004 .

[45]  Kok-Kwang Phoon,et al.  Model Uncertainty of Eurocode 7 Approach for Bearing Capacity of Circular Footings on Dense Sand , 2017 .

[46]  Robert V. Whitman,et al.  Organizing and evaluating uncertainty in geotechnical engineering , 2000 .

[47]  Michael McVay,et al.  LOAD AND RESISTANCE FACTOR DESIGN (LRFD) FOR DRIVEN PILES USING DYNAMIC METHODS-A FLORIDA PERSPECTIVE , 2000 .