Characterization of dust produced during the 2021 first campaign in EAST tokamak

[1]  R. Ding,et al.  Studies of material migration and deposition after the 2017 experimental campaign in EAST , 2022, Nuclear Materials and Energy.

[2]  S. Ratynskaia,et al.  Modelling of dust generation, transport and remobilization in full-metal fusion reactors , 2022, Plasma Physics and Controlled Fusion.

[3]  Jet Contributors,et al.  Simulations of liquid metal flows over plasma-facing component edges and application to beryllium melt events in JET , 2022, Nuclear Fusion.

[4]  R. Neu,et al.  Arc behaviour on different materials in ASDEX Upgrade , 2021, Nuclear Materials and Energy.

[5]  J. Irby,et al.  Cross machine investigation of magnetic tokamak dust; structural and magnetic analysis , 2021 .

[6]  B. Lipschultz,et al.  Cross machine investigation of magnetic tokamak dust: Morphological and elemental analysis , 2021 .

[7]  R. Ding,et al.  Result and discussion on the evolution of in-situ leading edge-induced melting on W divertor targets in EAST , 2021 .

[8]  R. Ding,et al.  Characterization on the melting failure of CuCrZr cooling tube of W/Cu monoblocks during plasma operations in EAST , 2020 .

[9]  S. Fazinić,et al.  Micro-analyses of dust particles generated in the JET tokamak with the ITER-like wall , 2020, Nuclear Fusion.

[10]  G. Pieters,et al.  Dust sampling in WEST and tritium retention in tokamak-relevant tungsten particles , 2020 .

[11]  R. Ding,et al.  Plasma-facing components damage and its effects on plasma performance in EAST tokamak , 2020 .

[12]  R. Ding,et al.  Characterization of the in situ leading-edge-induced melting on the ITER-like tungsten divertor in EAST , 2019, Nuclear Fusion.

[13]  E. Giovannozzi,et al.  Pre-plasma remobilization of ferromagnetic dust in FTU and possible interference with tokamak operations , 2019, Nuclear Fusion.

[14]  G. Matthews,et al.  Beryllium melting and erosion on the upper dump plates in JET during three ITER-like wall campaigns , 2019, Nuclear Fusion.

[15]  S. Brezinsek,et al.  Material migration and fuel retention studies during the JET carbon divertor campaigns , 2019, Fusion Engineering and Design.

[16]  M. Oyaidzu,et al.  Dust generation in tokamaks: Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall , 2018, Fusion Engineering and Design.

[17]  J. Contributors,et al.  Fine metal dust particles on the wall probes from JET-ILW , 2017 .

[18]  J. Contributors,et al.  Studies of dust from JET with the ITER-Like Wall: Composition and internal structure , 2017 .

[19]  C. Martin,et al.  Characterization and origin of large size dust particles produced in the Alcator C-Mod tokamak , 2017 .

[20]  C. Bressan,et al.  Investigation on FTU dust and on the origin of ferromagnetic and lithiated grains , 2015 .

[21]  A. Litnovsky,et al.  Dust remobilization in fusion plasmas under steady state conditions , 2015, 1508.06156.

[22]  C. Conti,et al.  Dust characterization in FTU tokamak , 2015 .

[23]  R. Neu,et al.  Collection strategy, inner morphology, and size distribution of dust particles in ASDEX Upgrade , 2014 .

[24]  V. Rohde,et al.  Characterization of dust collected after plasma operation of all-tungsten ASDEX Upgrade , 2014 .

[25]  V. Philipps,et al.  Survey of dust formed in the TEXTOR tokamak: structure and fuel retention , 2009 .

[26]  V. Rohde,et al.  Dust investigations at ASDEX Upgrade , 2009 .

[27]  Kun 坤 ZHANG 章,et al.  Characterization of dust collected in EAST after 2019 campaign , 2021 .