论文信息 - Influence of the Particles Velocity on the Arc Spraying Coating Adhesion

Influence of the Particles Velocity on the Arc Spraying Coating Adhesion

The article deals with investigation of the influence of spray gun nozzle parameters on sprayed particles velocity and strength of coating adhesion. Four different arc spray nozzles were chosen for research. All variables of the spray process were constant except the air debit. The adhesion of coatings was tested. The results of the test showed the dependence of coating adhesion on particles velocity and contamination.

A. Valiulis

[1] D. Wimpenny,et al. Mechanical and thermomechanical properties of metal spray invar for composite forming tooling , 2000 .

[2] T. Meek,et al. Active electronic devices fabricated by DC plasma arc spray process , 2000 .

[3] P. Grant,et al. Droplet splashing during arc spraying of steel and the effect on deposit microstructure , 2000 .

[4] E. Pfender,et al. Effect of nozzle configuration, gas pressure, and gas type on coating properties in wire arc spray , 1999 .

[5] H. Steffens,et al. Influence of the spray velocity on arc-sprayed coating structures , 1999 .

[6] P. Gougeon,et al. In-flight particle surface temperature measurement: Influence of the plasma light scattered by the particles , 1993 .