Wettability of carbon nanotube-grafted carbon fibers and their interfacial properties in polypropylene thermoplastic composite

[1]  H. Lee,et al.  Enhanced interfacial and mechanical properties of carbon fiber/PEEK composites by hydroxylated PEEK and carbon nanotubes , 2021 .

[2]  A. Bismarck,et al.  Piezoresistive structural composites reinforced by carbon nanotube-grafted quartz fibres , 2020 .

[3]  L. Gorbatikh,et al.  When does nanotube grafting on fibers benefit the strength and toughness of composites? , 2020 .

[4]  T. Hashimoto,et al.  Investigation of interfacial adhesion of telechelic polypropylenes for carbon fiber-reinforced plastics , 2019, Polymer Journal.

[5]  S. Pinho,et al.  Engineering tensile behavior of hybrid carbon fiber/self-reinforced polypropylene composites by bio-inspired fiber discontinuities , 2019 .

[6]  Xiaodong Wang,et al.  Wettability and interfacial properties of carbon fiber and poly (ether ether ketone) fiber hybrid composite. , 2019, ACS applied materials & interfaces.

[7]  L. Henderson,et al.  Using variable interfacial adhesion characteristics within a composite to improve flexural strength and decrease fiber volume , 2018, Composites Science and Technology.

[8]  H. Wagner,et al.  Continuous carbon nanotube synthesis on charged carbon fibers , 2018, Composites Part A: Applied Science and Manufacturing.

[9]  Linbao Zheng,et al.  Scalable manufacturing of carbon nanotubes on continuous carbon fibers surface from chemical vapor deposition , 2018 .

[10]  J. Locquet,et al.  Carbon nanotube-grafted carbon fiber polymer composites: Damage characterization on the micro-scale , 2017 .

[11]  J. Seo,et al.  Wettability of carbon nanotube fibers , 2017 .

[12]  Xungai Wang,et al.  Wettability of carbon fibres at micro- and mesoscales , 2017 .

[13]  M. Naebe,et al.  Interfacial characterization and reinforcing mechanism of novel carbon nanotube – Carbon fibre hybrid composites , 2016 .

[14]  Seung A. Song,et al.  A novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix , 2016 .

[15]  C. Fuentes,et al.  Wettability of a Single Carbon Fiber. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[16]  Bin Yang,et al.  An effective surface modification of carbon fiber for improving the interfacial adhesion of polypropylene composites , 2015 .

[17]  József Karger-Kocsis,et al.  Recent advances in fiber/matrix interphase engineering for polymer composites , 2015 .

[18]  S. Kim,et al.  Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites , 2014 .

[19]  Xiaodong He,et al.  The role of grafting force and surface wettability in interfacial enhancement of carbon nanotube/carbon fiber hierarchical composites , 2014 .

[20]  Scott R White,et al.  Autonomic healing of carbon fiber/epoxy interfaces. , 2014, ACS applied materials & interfaces.

[21]  Mohamad Amran Mohd Salleh,et al.  Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite , 2014 .

[22]  Fan Yang,et al.  Preparation of carbon nanotube/carbon fiber hybrid fiber by combining electrophoretic deposition and sizing process for enhancing interfacial strength in carbon fiber composites , 2013 .

[23]  V. Deniz,et al.  Effects of sizing materials on the properties of carbon fiber‐reinforced polyamide 6,6 composites , 2013 .

[24]  Kazuto Tanaka,et al.  Increasing the interfacial strength in carbon fiber/polypropylene composites by growing CNTs on the fibers , 2013 .

[25]  Mingbo Wu,et al.  Effect of catalytic site position: Nickel nanocatalyst selectively loaded inside or outside carbon nanotubes for methane dry reforming , 2013 .

[26]  Ignace Verpoest,et al.  Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites , 2013 .

[27]  R. Brooks,et al.  Effect of coupling agents on reinforcing potential of recycled carbon fibre for polypropylene composite , 2012 .

[28]  Liping Yu,et al.  Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide. , 2012, ACS applied materials & interfaces.

[29]  Liu Yang,et al.  Temperature dependence of the interfacial shear strength in glass–fibre polypropylene composites , 2011 .

[30]  S. Basu,et al.  Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites , 2011 .

[31]  Alejandro J. Rodriguez,et al.  Effects of electrophoretically deposited carbon nanofibers on the interface of single carbon fibers embedded in epoxy matrix , 2011 .

[32]  Hui Qian,et al.  Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation , 2010 .

[33]  A. Bismarck,et al.  Carbon fibre reinforced poly(vinylidene fluoride): Impact of matrix modification on fibre/polymer adhesion , 2008 .

[34]  Hui Qian,et al.  Hierarchical Composites Reinforced with Carbon Nanotube Grafted Fibers: The Potential Assessed at the Single Fiber Level , 2008 .

[35]  E. Sacher,et al.  The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment , 2008 .

[36]  Xiaodong He,et al.  Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers , 2007 .

[37]  A. Bismarck,et al.  Interfacial behavior between atmospheric-plasma-fluorinated carbon fibers and poly(vinylidene fluoride). , 2007, Journal of colloid and interface science.

[38]  James Alastair McLaughlin,et al.  High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs , 2005 .

[39]  C. Volpe,et al.  The solid surface free energy calculation. I. In defense of the multicomponent approach. , 2004, Journal of colloid and interface science.

[40]  D. Maniglio,et al.  Recent theoretical and experimental advancements in the application of van Oss–Chaudury–Good acid–base theory to the analysis of polymer surfaces I. General aspects , 2003 .

[41]  Edith Mäder,et al.  How can adhesion be determined from micromechanical tests , 2001 .

[42]  T. Ramanathan,et al.  Investigation of the influence of acidic and basic surface groups on carbon fibres on the interfacial shear strength in an epoxy matrix by means of single-fibre pull-out test , 2001 .

[43]  P. J. Reucroft,et al.  XPS study of carbon fiber surfaces treated by thermal oxidation in a gas mixture of O2/(O2+N2) , 2001 .

[44]  N. Dilsiz,et al.  Effect of acid–base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion ☆ , 2000 .

[45]  S. Siboni,et al.  Acid–base surface free energies of solids and the definition of scales in the Good–van Oss–Chaudhury theory , 2000 .

[46]  A. Bismarck,et al.  Basic and acidic surface oxides on carbon fiber and their influence on the expected adhesion to polyamide , 1999 .

[47]  J. Karger‐Kocsis,et al.  Study on surface and mechanical fiber characteristics and their effect on the adhesion properties to a polycarbonate matrix tuned by anodic carbon fiber oxidation , 1999 .

[48]  A. Bismarck,et al.  Basic surface oxides on carbon fibers , 1999 .

[49]  A. Neimark.  Thermodynamic equilibrium and stability of liquid films and droplets on fibers , 1999 .

[50]  C. Volpe,et al.  Some Reflections on Acid-Base Solid Surface Free Energy Theories , 1997, Journal of colloid and interface science.

[51]  J. Månson,et al.  A criterion for optimum adhesion applied to fibre reinforced composites , 1997 .

[52]  A. Błędzki,et al.  The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites , 1997 .

[53]  S. Chiao,et al.  Visualization of Dynamic Contact Angles on Cylinder and Fiber , 1996 .

[54]  D. Packham.  Work of adhesion: contact angles and contact mechanics , 1996 .

[55]  A. Offringa.  Thermoplastic composites—rapid processing applications , 1996 .

[56]  L. Drzal,et al.  The role of chemical bonding and surface topography in adhesion between carbon fibers and epoxy matrices , 1996 .

[57]  C. Sykes,et al.  Average spreading parameter on heterogeneous surfaces , 1994 .

[58]  H. Jacobasch,et al.  Surface, interphase and composite property relations in fibre-reinforced polymers , 1994 .

[59]  P. Sherwood,et al.  AS4 PAN‐based Carbon Fiber by Core Level and Valence Band XPS , 1992 .

[60]  M. Chaudhury,et al.  Additive and nonadditive surface tension components and the interpretation of contact angles , 1988 .

[61]  M. Chaudhury,et al.  Monopolar surfaces. , 1987, Advances in colloid and interface science.

[62]  Souheng Wu.  Polar and Nonpolar Interactions in Adhesion , 1973 .