Simulation of SOFC stack and repeat elements including interconnect degradation and anode reoxidation risk

Abstract Reliability of SOFC stacks is a complex and key issue. This paper presents a simulation study including some degradation processes, namely interconnect degradation and the anode reoxidation potential. Quantification for these phenomena has been included in a repeat element model to simulate stack degradation and study the influence of design and operating parameters on the degradation. Interconnect degradation is based on Wagner's law for oxide scale growth, parameters applying to metallic interconnects used in planar SOFCs are used. Anode reoxidation is modeled by thermodynamic equilibrium which allows identification of the operating conditions where the anode is likely to be reoxidized. Simulations have been carried out for a large number of cases at different current density, fuel utilization and furnace temperature, for two different stack designs (base case and modified design). Using an appropriate criterion to express degradation, all these cases point to a clear trade-off between interconnect degradation and local temperature. The base case design is likely to be exposed to anode reoxidation.

[1]  Satoshi Ohara,et al.  Effect of aging on conductivity of yttria stabilized zirconia , 2004 .

[2]  Ellen Ivers-Tiffée,et al.  Long Term Stability of Yttria and Scandia Doped Zirconia Electrolytes , 2003 .

[3]  P. H. Middleton.  Morphology and Electrochemistry of Porous Nickel/Zirconia Cermets , 1989 .

[4]  Harumi Yokokawa,et al.  Thermodynamic analysis on interface between perovskite electrode and YSZ electrolyte , 1990 .

[5]  Mogens Bjerg Mogensen,et al.  H 2 ­ H 2 O ­ Ni ­ YSZ Electrode Performance Effect of Segregation to the Interface , 2004 .

[6]  D. Favrat,et al.  CFD simulation tool for solid oxide fuel cells , 2004 .

[7]  M. J. Jørgensen,et al.  Durability test of SOFC cathodes , 2000 .

[8]  Daniel Favrat,et al.  Current collection and stacking of anode-supported cells with metal interconnects to compact repeating units , 2003 .

[9]  Hermann Schichl,et al.  Degradation of the electrical conductivity in stabilised zirconia system: Part II: Scandia-stabilised zirconia , 2005 .

[10]  Douglas G. Ivey,et al.  Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes , 2005 .

[11]  Seung M. Oh,et al.  Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface , 1996 .

[12]  M. Mogensen,et al.  Durability and thermal cycling of Ni/YSZ cermet anodes for solid oxide fuel cells , 2000 .

[13]  Christian Gindorf,et al.  Determination of Chromium Vaporization Rates of Different Interconnect Alloys by Transpiration Experiments , 2001 .

[14]  Hermann Schichl,et al.  Degradation of the electrical conductivity in stabilised zirconia systems , 2005 .

[15]  K. S. Weil,et al.  Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect Applications , 2003 .

[16]  U. Stimming,et al.  Advances, aging mechanisms and lifetime in solid-oxide fuel cells , 2004 .

[17]  Daniel Favrat,et al.  Modeling of cross-flow stack: sensitivity to thermal properties of the materials , 2003 .

[18]  Z. Yang,et al.  Structure and Conductivity of Thermally Grown Scales on Ferritic Fe-Cr-Mn Steel for SOFC Interconnect Applications , 2004 .

[19]  J. Pirón Abelián.  Ferritic Steel Interconnect for Reduced Temperature SOFC , 2001 .

[20]  Søren Linderoth,et al.  Effect of NiO-to-Ni transformation on conductivity and structure of yttria-stabilized ZrO2 , 2001 .

[21]  Andy Horsewell,et al.  Microstructural and microchemical characterization of the interface between La0.85Sr0.15MnO3 and Y2O3-stabilized ZrO2 , 1994 .

[22]  Steven P. Simner,et al.  Interaction between La(Sr)FeO3 SOFC cathode and YSZ electrolyte , 2003 .

[23]  François Maréchal,et al.  Generalized model of planar SOFC repeat element for design optimization , 2004 .

[24]  Anil V. Virkar,et al.  Reduction and re-oxidation kinetics of nickel-based solid oxide fuel cell anodes , 2003 .

[25]  John B. Goodenough,et al.  Characterization of Iron-Based Alloy Interconnects for Reduced Temperature Solid Oxide Fuel Cells , 2000 .

[26]  Diego Larrain,et al.  Solid oxide fuel cell stack simulation and optimization, including experimental validation and transient behavior , 2005 .

[27]  Willem J. Quadakkers,et al.  Ferritic steel interconnect for reduced temperature SOFC , 2001 .