Commissioning and Evaluation of a Fiber-Optic Sensor System for Bridge Monitoring

This paper describes the design, commissioning, and evaluation of a fiber-optic strain sensor system for the structural health monitoring of a prestressed concrete posttensioned box girder railway bridge in Mumbai, India, which shows a number of well-documented structural problems. Preliminary laboratory trials to design the most appropriate sensor system that could be readily transported and used on site are described, followed by a description of load tests on the actual bridge undertaken in collaboration with Indian Railways and using locomotives of known weight. Results from the load tests using the optical system are compared with similar results obtained using electrical resistance strain gages. Conclusions are summarized concerning the integrity of the structure and for the future use of the sensor system for monitoring bridges of this type. Crack width measurements obtained during the load tests are also described.

[1]  Kenneth T. V. Grattan,et al.  Monitoring of an all-composite bridge using Bragg grating sensors , 2007 .

[2]  Ahmad Fairuz Omar,et al.  Fiber Optic Sensors: An Introduction for Engineers and Scientists , 2013 .

[3]  R. H. Scott,et al.  Moment redistribution effects in beams , 2005 .

[4]  Farhad Ansari,et al.  Fiber optic health monitoring of civil structures using long gage and acoustic sensors , 2005 .

[5]  K.T.V. Grattan,et al.  A field deployable, multiplexed Bragg grating sensor system used in an extensive highway bridge monitoring evaluation tests , 2005, IEEE Sensors Journal.

[6]  Eric Udd,et al.  High speed measurements using fiber-optic Bragg gratings , 2011, Defense + Commercial Sensing.

[7]  Richard H. Scott,et al.  Long-Term Tension-Stiffening Effects in Concrete , 2005 .

[8]  Richard O. Claus,et al.  Experimental Study of Embedded Fiber‐Optic Strain Gauges in Concrete Structures , 1994 .

[9]  Kenneth T. V. Grattan,et al.  Monitoring of corrosion in situ in structural reinforcement bars using a 'wrapped fibre optic sensor network. , 2009 .

[10]  Tong Sun,et al.  Development and Longer Term In Situ Evaluation of Fiber-Optic Sensors for Monitoring of Structural Concrete , 2009, IEEE Sensors Journal.

[11]  David P. Thambiratnam,et al.  Using fiber bragg grating (FBG) sensors for vertical displacement measurement of bridges , 2011 .

[12]  Zhi Zhou,et al.  Development and sensing properties study of FRP–FBG smart stay cable for bridge health monitoring applications , 2011 .

[13]  Tommy H.T. Chan,et al.  Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge : Background and experimental observation , 2006 .

[14]  Wentao Zhang,et al.  Applications of fiber optic sensors in concrete structural health monitoring , 2007, SPIE/COS Photonics Asia.

[15]  Jenn-Chuan Chern,et al.  The health monitoring of a prestressed concrete beam by using fiber Bragg grating sensors , 2004 .