Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

O3-layered metal oxides are promising cathode materials for high-energy Na-ion batteries (SIBs); however, they suffer from fast capacity fade. Here, we develop a high-performance O3-NaNi0.68Mn0.22C...

[1]  Chenglong Zhao,et al.  Anionic Redox Reaction-Induced High-Capacity and Low-Strain Cathode with Suppressed Phase Transition , 2019, Joule.

[2]  Piero Pianetta,et al.  Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries , 2018, Nano Energy.

[3]  Ji‐Guang Zhang,et al.  Solid–Liquid Interfacial Reaction Trigged Propagation of Phase Transition from Surface into Bulk Lattice of Ni-Rich Layered Cathode , 2018, Chemistry of Materials.

[4]  K. Amine,et al.  Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries , 2018, Nature Nanotechnology.

[5]  Fernando A. Soto,et al.  Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes , 2018, Advanced Energy Materials.

[6]  Ji‐Guang Zhang,et al.  Stable cycling of high-voltage lithium metal batteries in ether electrolytes , 2018, Nature Energy.

[7]  G. Yushin,et al.  Ten years left to redesign lithium-ion batteries , 2018, Nature.

[8]  Ji‐Guang Zhang,et al.  Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries , 2018, Nature Energy.

[9]  Junhua Song,et al.  Interphases in Sodium‐Ion Batteries , 2018 .

[10]  J. Barker,et al.  The Scale‐up and Commercialization of Nonaqueous Na‐Ion Battery Technologies , 2018 .

[11]  Zonghai Chen,et al.  Insight into Ca-Substitution Effects on O3-Type NaNi1/3 Fe1/3 Mn1/3 O2 Cathode Materials for Sodium-Ion Batteries Application. , 2018, Small.

[12]  Ji‐Guang Zhang,et al.  High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes , 2018, Advanced materials.

[13]  Jun Lu,et al.  Stabilization of a High-Capacity and High-Power Nickel-Based Cathode for Li-Ion Batteries , 2018 .

[14]  S. Passerini,et al.  A cost and resource analysis of sodium-ion batteries , 2018 .

[15]  Xiao Lu,et al.  High Energy Density Sodium‐Ion Battery with Industrially Feasible and Air‐Stable O3‐Type Layered Oxide Cathode , 2018 .

[16]  Minjoon Park,et al.  Prospect and Reality of Ni‐Rich Cathode for Commercialization , 2018 .

[17]  P. Bruce,et al.  Oxygen redox chemistry without excess alkali-metal ions in Na2/3[Mg0.28Mn0.72]O2. , 2018, Nature chemistry.

[18]  Ji‐Guang Zhang,et al.  Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes , 2018 .

[19]  C. Yoon,et al.  High-Energy Ni-Rich Li[NixCoyMn1–x–y]O2 Cathodes via Compositional Partitioning for Next-Generation Electric Vehicles , 2017 .

[20]  Haoshen Zhou,et al.  Environmentally stable interface of layered oxide cathodes for sodium-ion batteries , 2017, Nature Communications.

[21]  Ya‐Xia Yin,et al.  Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[22]  M. Obrovac,et al.  Investigation of O3-type Na0.9Ni0.45MnxTi0.55-xO2 (0 ≤ x ≤ 0.55) as positive electrode materials for sodium-ion batteries , 2017 .

[23]  Jianming Zheng,et al.  Electrolyte additive enabled fast charging and stable cycling lithium metal batteries , 2017, Nature Energy.

[24]  Jianming Zheng,et al.  Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries , 2017, Nature Communications.

[25]  Peter Lamp,et al.  Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives , 2017 .

[26]  Yuki Yamada,et al.  Superconcentrated electrolytes for a high-voltage lithium-ion battery , 2016, Nature Communications.

[27]  Yong-Sheng Hu,et al.  Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode , 2015, Advanced materials.

[28]  Ilias Belharouak,et al.  Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries , 2015, Nature Communications.

[29]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.

[30]  Young-Sang Yu,et al.  The formation mechanism of fluorescent metal complexes at the Li(x)Ni(0.5)Mn(1.5)O(4-δ)/carbonate ester electrolyte interface. , 2015, Journal of the American Chemical Society.

[31]  Motoaki Nishijima,et al.  Rhombohedral prussian white as cathode for rechargeable sodium-ion batteries. , 2015, Journal of the American Chemical Society.

[32]  Kang Xu,et al.  Electrolytes and interphases in Li-ion batteries and beyond. , 2014, Chemical reviews.

[33]  M Stanley Whittingham,et al.  Ultimate limits to intercalation reactions for lithium batteries. , 2014, Chemical reviews.

[34]  Yi Cui,et al.  Manganese hexacyanomanganate open framework as a high-capacity positive electrode material for sodium-ion batteries , 2014, Nature Communications.

[35]  Shin-ichi Nishimura,et al.  A 3.8-V earth-abundant sodium battery electrode , 2014, Nature Communications.

[36]  Feng Lin,et al.  Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.

[37]  K. Kang,et al.  A new high-energy cathode for a Na-ion battery with ultrahigh stability. , 2013, Journal of the American Chemical Society.

[38]  Shinichi Komaba,et al.  P2-type Na(x)[Fe(1/2)Mn(1/2)]O2 made from earth-abundant elements for rechargeable Na batteries. , 2012, Nature materials.

[39]  Kevin G. Gallagher,et al.  Modeling the performance and cost of lithium-ion batteries for electric-drive vehicles. , 2011 .

[40]  Arumugam Manthiram,et al.  Progress in High‐Voltage Cathode Materials for Rechargeable Sodium‐Ion Batteries , 2018 .

[41]  James A. Gilbert,et al.  Transition Metal Dissolution, Ion Migration, Electrocatalytic Reduction and Capacity Loss in Lithium-Ion Full Cells , 2017 .

[42]  L. Krause,et al.  The Effect of Carbon Dioxide on the Cycle Life and Electrolyte Stability of Li-Ion Full Cells Containing Silicon Alloy , 2017 .

[43]  J. Dahn,et al.  Some Fluorinated Carbonates as Electrolyte Additives for Li(Ni0.4Mn0.4Co0.2)O2/Graphite Pouch Cells , 2016 .

[44]  K. Kubota,et al.  Review-Practical Issues and Future Perspective for Na-Ion Batteries , 2015 .

[45]  Haegyeom Kim,et al.  Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries , 2014 .