Inkjet-Printed Microstrip Patch Antennas Realized on Textile for Wearable Applications

This letter introduces a new technique of inkjet printing antennas on textiles. A screen-printed interface layer was used to reduce the surface roughness of the polyester/cotton material that facilitated the printing of a continuous conducting surface. Conducting ink was used to create three inkjet-printed microstrip patch antennas. An efficiency of 53% was achieved for a fully flexible antenna with two layers of ink. Measurements of the antennas bent around a polystyrene cylinder indicated that a second layer of ink improved the robustness to bending.

[1]  P.S. Hall,et al.  Antennas and propagation for body centric wireless communications , 2012, IEEE/ACES International Conference on Wireless Communications and Applied Computational Electromagnetics, 2005..

[2]  Yahya Rahmat-Samii,et al.  Textile antennas: effects of antenna bending on input matching and impedance bandwidth , 2006, IEEE Aerospace and Electronic Systems Magazine.

[3]  K.W. Whites,et al.  Inkjet printed microwave frequency multilayer antennas , 2007, 2007 IEEE Antennas and Propagation Society International Symposium.

[4]  Y. Rahmat-Samii,et al.  Textile antennas: Effect of antenna bending on radiation pattern and efficiency , 2008, 2008 IEEE Antennas and Propagation Society International Symposium.

[5]  Yang Hao.  Antennas and Propagation for Body-Centric Wireless Communications , 2008, IEEE Antennas and Propagation Magazine.

[6]  Li Yang,et al.  Conductive Inkjet-Printed Antennas on Flexible Low-Cost Paper-Based Substrates for RFID and WSN Applications , 2009, IEEE Antennas and Propagation Magazine.

[7]  J. C. G. Matthews,et al.  Development of flexible, wearable antennas , 2009, 2009 3rd European Conference on Antennas and Propagation.

[8]  T. F. Kennedy,et al.  Body-Worn E-Textile Antennas: The Good, the Low-Mass, and the Conformal , 2009, IEEE Transactions on Antennas and Propagation.

[9]  Qiang Bai,et al.  Textile antenna bending and crumpling , 2010, Proceedings of the Fourth European Conference on Antennas and Propagation.

[10]  Leena Ukkonen,et al.  Analysis of electrically conductive silver ink on stretchable substrates under tensile load , 2010, Microelectronics Reliability.

[11]  Kenneth Lee Ford,et al.  A stretchable PIFA antenna , 2011, 2011 Loughborough Antennas & Propagation Conference.

[12]  M. Mäntysalo,et al.  Inkjet-Printed RF Structures on BST–Polymer Composites: An Application of a Monopole Antenna for 2.4 GHz Wireless Local Area Network Operation , 2011 .

[13]  Hendrik Rogier,et al.  Washable Screen Printed Textile Antennas , 2012 .

[14]  P. de Maagt,et al.  Design and Manufacturing of Robust Textile Antennas for Harsh Environments , 2012, IEEE Transactions on Antennas and Propagation.

[15]  Johanna Virkki,et al.  Towards Washable Wearable Antennas: A Comparison of Coating Materials for Screen-Printed Textile-Based UHF RFID Tags , 2012 .

[16]  John C. Batchelor,et al.  Towards inkjet-printed low cost passive UHF RFID skin mounted tattoo paper tags based on silver nanoparticle inks , 2013 .

[17]  Steve Beeby,et al.  Inkjet printed dipole antennas on textiles for wearable communications , 2013 .

[18]  William G. Whittow,et al.  Effect of the fabrication parameters on the performance of embroidered antennas , 2013 .