Formation of Banded Intergranular Segregation and Control via Micro-alloying in Twin-roll Casted Al-Zn-Mg-Cu Alloy with High Solidification Interval

[1]  Yunlong Ma,et al.  Characterization of Al3Zr precipitation via double-step homogenization and recrystallization behavior after subsequent deformation in 2195 Al Li alloy , 2021, Materials Characterization.

[2]  M. Zha,et al.  Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation , 2021, Materials Science and Engineering: A.

[3]  Q. Jiang,et al.  Effectively mitigated macro-segregation and improved tensile properties of twin-roll casting Al-Cu strips via the addition of TiC nanoparticles , 2021 .

[4]  Jinyu Fu,et al.  Two-stage homogenization of Al-Zn-Mg-Cu-Zr alloy processed by twin-roll casting to improve L12 Al3Zr precipitation, recrystallization resistance, and performance , 2021 .

[5]  M. Li,et al.  Role of the local stress systems on microstructural inhomogeneity during semisolid injection , 2021, Acta Materialia.

[6]  Yuan-chun Huang,et al.  Through-thickness shear texture of the twin-roll cast AA6016 sheet after asymmetric rolling and its recrystallization behavior , 2021 .

[7]  Ruifeng Dou,et al.  Rationalizing Al-Mg, Al-Mg-Si, and multicomponent aluminum alloy design with segregation susceptibility predictions , 2020 .

[8]  C. Gourlay,et al.  Rheological transitions in semi-solid alloys: In-situ imaging and LBM-DEM simulations , 2020, Acta Materialia.

[9]  Di Wu,et al.  Effect of electromagnetic fields on microstructure and mechanical properties of sub-rapid solidification-processed Al–Mg–Si alloy during twin-roll casting , 2019, Materials Science and Engineering: A.

[10]  C. Gourlay,et al.  Semi-solid deformation of Al-Cu alloys: A quantitative comparison between real-time imaging and coupled LBM-DEM simulations , 2019, Acta Materialia.

[11]  Hyoung-Wook Kim,et al.  Deformation-induced center segregation in twin-roll cast high-Mg Al–Mg strips , 2018, Scripta Materialia.

[12]  L. Rong,et al.  Effect of minor Sc addition on microstructure and stress corrosion cracking behavior of medium strength Al–Zn–Mg alloy , 2017, Journal of Materials Science & Technology.

[13]  Guojun Wang,et al.  Effect of microstructure on exfoliation corrosion resistance in an Al-Zn-Mg alloy , 2018 .

[14]  O. Grydin,et al.  Deformation Zone Length and Plastic Strain in Twin-Roll Casting of Strips of Al-Mg-Si Alloy , 2017 .

[15]  Guangming Xu,et al.  Improvement of microstructure and properties in twin-roll casting 7075 sheet by lower casting speed and compound field , 2017 .

[16]  C. Gourlay,et al.  Dilatancy in semi-solid steels at high solid fraction , 2017 .

[17]  Zhong-Qing An,et al.  Centerline segregation mechanism of twin-roll cast A3003 strip , 2015 .

[18]  K. Chen,et al.  Effect of recrystallization on intergranular fracture and corrosion of Al–Zn–Mg–Cu–Zr alloy , 2015 .

[19]  C. Gourlay,et al.  Pore behaviour during semi-solid alloy compression: Insights into defect creation under pressure , 2014 .

[20]  Byeong-Chan Suh,et al.  Segregation in twin-roll cast Mg alloy and its suppression through alloy design , 2014 .

[21]  X. Ren,et al.  Numerical simulation on the stress field of austenite stainless steel during twin-roll strip casting process , 2012 .

[22]  K. Uesugi,et al.  Direct observation of deformation in semi-solid carbon steel , 2011 .

[23]  A. K. Dahle,et al.  Dilatancy and rheology at 0–60% solid during equiaxed solidification , 2011 .

[24]  L. Kestens,et al.  The effect of particle-stimulated nucleation on texture banding in an aluminium alloy , 2010 .

[25]  Y. Birol.  Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves , 2009 .

[26]  Nack J. Kim,et al.  Microstructure and tensile properties of twin-roll cast Mg-Zn-Mn-Al alloys , 2007 .

[27]  Arne K. Dahle,et al.  Defect Band Characteristics in Mg-Al and Al-Si High-Pressure Die Castings , 2007 .

[28]  M. Easton,et al.  The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al–7Si–0.4Mg , 2006 .

[29]  C. Gandin,et al.  Segregation during solidification with spongy deformation of the mushy zone , 2003 .

[30]  L. Arnberg,et al.  Determination of dendritic coherency in solidifying melts by rheological measurements , 1993 .