Study on Hot Workability of Al-5.87Zn-2.07Mg-2.28Cu Alloy Using Processing Map
暂无分享,去创建一个
D. Xiao | Z. Yin | Xiaopeng Liang | Ying Deng | Xiaoyan Peng | Guo-fu Xu | Y. Deng
[1] Y. Lin,et al. EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation , 2016 .
[2] Yu-tao Zhao,et al. Hot deformation behavior and optimization of processing parameters of a typical high-strength Al–Mg–Si alloy , 2016 .
[3] L. Zhuang,et al. Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map , 2015 .
[4] Xingtao Liu,et al. Hot deformation behavior and microstructural evolution of as-homogenized Al–6Mg–0.4Mn–0.25Sc–0.1Zr alloy during compression at elevated temperature , 2015 .
[5] Zhenjun Huang,et al. Research on the hot deformation behavior of Al–6.2Zn–0.70Mg–0.3Mn–0.17Zr alloy using processing map , 2015 .
[6] Z. Yin,et al. Characterization of hot deformation behavior of as-homogenized Al–Cu–Li–Sc–Zr alloy using processing maps , 2014 .
[7] X. Chen,et al. Effect of vanadium on hot deformation and microstructural evolution of 7150 aluminum alloy , 2014 .
[8] Qing Liu,et al. Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature , 2014 .
[9] M. Fu,et al. Hot deformation behavior and hot working characteristic of Nickel-base electron beam weldments , 2014 .
[10] W. Mao,et al. Evolution of activation energy during hot deformation of AA7150 aluminum alloy , 2013 .
[11] Y. C. Lin,et al. Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .
[12] S. Suwas,et al. The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B , 2013 .
[13] V. Senthilkumar,et al. Analysis of hot deformation behavior of Al 5083–TiC nanocomposite using constitutive and dynamic material models , 2012 .
[14] Xiaopeng Liang,et al. Hot deformation and processing map of 2519A aluminum alloy , 2011 .
[15] Yu Sun,et al. Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing map , 2011 .
[16] Z. Yin,et al. Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature , 2011 .
[17] Mehrdad Aghaie-Khafri,et al. Hot deformation of 15-5 PH stainless steel , 2010 .
[18] Z. Nie,et al. Hot deformation and processing maps of an Al–5.7 wt.%Mg alloy with erbium , 2009 .
[19] Y. Prasad,et al. Hot deformation behaviour of as-cast Mg–2Zn–1Mn alloy in compression: a study with processing map , 2003 .
[20] E. A. Starke,et al. Progress in structural materials for aerospace systems , 2003 .
[21] J. T. Staley,et al. Application of modern aluminum alloys to aircraft , 1996 .