Thermomechanical finite element modeling of Cu–SiO 2 direct hybrid bonding with a dishing effect on Cu surfaces

Abstract Copper direct bonding technology is considered to be one of the most promising approaches for matching the miniaturization needs in future tridimensional integrated high performance circuits (3D-IC). However, the bonding mechanism of copper surfaces with an initial dishing effect, induced by the polishing step, must be investigated in order to optimize the adhesion process and prevent further reliability issues. In this study, we present thermomechanical finite element simulations of Cu–SiO 2 hybrid bonding with account for the annealing step and various amplitudes of the initial dishing. A cohesive model that mimics nonlinear interactions between Cu/Cu and SiO 2 /SiO 2 interfaces and related bonding mechanism is implemented within a nonlinear contact mechanics strategy. The bonding process along with the influence of the annealing conditions and the copper plastic response on the closure of the Cu/Cu interface are investigated.

[1]  Pierric Gueguen,et al.  Copper direct bonding for 3D integration , 2008, 2008 International Interconnect Technology Conference.

[2]  Cohesive zone model for direct silicon wafer bonding , 2007 .

[3]  Alexis Farcy,et al.  Performances of Wafer-Level UnderFill with 50µm pitch interconnections: Comparison with conventional underfill , 2011, 2011 IEEE 13th Electronics Packaging Technology Conference.

[4]  On the kinetics of crack growth in glass , 2009 .

[5]  Stéphane Moreau,et al.  Chip to wafer copper direct bonding electrical characterization and thermal cycling , 2013, 2013 IEEE International 3D Systems Integration Conference (3DIC).

[6]  Maik Wiemer,et al.  A new approach for handling and transferring of thin semiconductor materials , 2003 .

[7]  F. Fournel,et al.  Measurement of bonding energy in an anhydrous nitrogen atmosphere and its application to silicon direct bonding technology , 2012 .

[8]  Pierric Gueguen,et al.  Full characterization of Cu/Cu direct bonding for 3D integration , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).

[9]  C. Spanos,et al.  Dishing-radius model of copper CMP dishing effects , 2005, IEEE Transactions on Semiconductor Manufacturing.

[10]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[11]  Mitsumasa Koyanagi,et al.  Handbook of 3D Integration , 2008 .

[12]  Chuan Seng Tan,et al.  Wafer-on-Wafer Stacking by Bumpless Cu–Cu Bonding and Its Electrical Characteristics , 2011, IEEE Electron Device Letters.

[13]  Pierric Gueguen,et al.  An Overview of Patterned Metal/Dielectric Surface Bonding: Mechanism, Alignment and Characterization , 2011 .

[14]  D. Lafond,et al.  Mechanism of Thermal Silicon Oxide Direct Wafer Bonding , 2009 .

[15]  M. Zussy,et al.  Copper Direct-Bonding Characterization and Its Interests for 3D Integration , 2009 .

[16]  S. Lefebvre,et al.  Thermal fatigue and failure of electronic power device substrates , 2009 .

[17]  L. Di Cioccio,et al.  Investigation of stress induced voiding and electromigration phenomena on direct copper bonding interconnects for 3D integration , 2011, 2011 International Electron Devices Meeting.