Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

The additive‐manufacturing (AM) technique, known as three‐dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D‐printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO‐based materials, have been extensively reported for energy‐related applications. In these circumstances, understanding the very recent developments of 3D‐printed carbon materials and their extended applications to address energy‐related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy‐related applications are reviewed, including energy‐storage applications, electronic circuits, and thermal‐energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D‐printing technology based on carbon materials for energy‐related applications and beyond.

[1]  Feiyu Kang,et al.  Ultra-thick graphene bulk supercapacitor electrodes for compact energy storage , 2016 .

[2]  Yonggang Yao,et al.  Ultra-fast self-assembly and stabilization of reactive nanoparticles in reduced graphene oxide films , 2016, Nature Communications.

[3]  Linsen Li,et al.  High-performance battery electrodes via magnetic templating , 2016, Nature Energy.

[4]  Florian Bouville,et al.  Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries , 2016, Nature Energy.

[5]  Jinbao Guo,et al.  Fabrication of highly conductive graphene flexible circuits by 3D printing , 2016 .

[6]  Yanwu Zhu,et al.  A Hierarchical Carbon Derived from Sponge‐Templated Activation of Graphene Oxide for High‐Performance Supercapacitor Electrodes , 2016, Advanced materials.

[7]  Jinyun Liu,et al.  High Volumetric Capacity Three-Dimensionally Sphere-Caged Secondary Battery Anodes. , 2016, Nano letters.

[8]  Jiangtao Hu,et al.  3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery , 2016 .

[9]  Kun Fu,et al.  Flexible, High Temperature, Planar Lighting with Large Scale Printable Nanocarbon Paper , 2016, Advanced materials.

[10]  Bruce Dunn,et al.  Efficient storage mechanisms for building better supercapacitors , 2016, Nature Energy.

[11]  Liangbing Hu,et al.  Three-Dimensional Printable High-Temperature and High-Rate Heaters. , 2016, ACS nano.

[12]  Tian Li,et al.  Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries , 2016, Advanced materials.

[13]  Feng Zhang,et al.  3D Printing of Graphene Aerogels. , 2016, Small.

[14]  James F Rusling,et al.  3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray. , 2016, Biosensors & bioelectronics.

[15]  Fang Qian,et al.  Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores. , 2016, Nano letters.

[16]  J. Goodenough.  Energy storage materials: A perspective , 2015 .

[17]  J. Lewis,et al.  Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics , 2015, Advanced materials.

[18]  Lei Zhang,et al.  A review of electrolyte materials and compositions for electrochemical supercapacitors. , 2015, Chemical Society reviews.

[19]  C. Highley,et al.  Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.

[20]  Seiji Kumagai,et al.  Cycle performance of lithium-ion capacitors using graphite negative electrodes at different pre-lithiation levels , 2015 .

[21]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[22]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[23]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[24]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[25]  Yan Yao,et al.  Interlayer-expanded molybdenum disulfide nanocomposites for electrochemical magnesium storage. , 2015, Nano letters.

[26]  Eduardo Saiz,et al.  Printing in Three Dimensions with Graphene , 2015, Advanced materials.

[27]  Matthew D. Goodman,et al.  Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes. , 2015, ACS nano.

[28]  Wei Lv,et al.  Self-Assembled 3D Graphene Monolith from Solution. , 2015, The journal of physical chemistry letters.

[29]  M. Hersam,et al.  Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics. , 2015, The journal of physical chemistry letters.

[30]  Chee Kai Chua,et al.  Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors , 2015 .

[31]  Joong Tark Han,et al.  3D Printing of Reduced Graphene Oxide Nanowires , 2015, Advanced materials.

[32]  Michael C. McAlpine,et al.  3D printed quantum dot light-emitting diodes. , 2014, Nano letters.

[33]  Xingjiu Huang,et al.  Hydrothermal Fabrication of Three‐Dimensional Secondary Battery Anodes , 2014, Advanced materials.

[34]  S. Magdassi,et al.  Conductive nanomaterials for printed electronics. , 2014, Small.

[35]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[36]  Leroy Cronin,et al.  3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture , 2014 .

[37]  R. Mülhaupt,et al.  3D Micro‐Extrusion of Graphene‐based Active Electrodes: Towards High‐Rate AC Line Filtering Performance Electrochemical Capacitors , 2014 .

[38]  Quan-hong Yang,et al.  Self‐Assembly of Graphene Oxide at Interfaces , 2014, Advanced materials.

[39]  Robert C. Maher,et al.  Mesoscale assembly of chemically modified graphene into complex cellular networks , 2014, Nature Communications.

[40]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[41]  Bethany C Gross,et al.  3D printed microfluidic devices with integrated versatile and reusable electrodes. , 2014, Lab on a chip.

[42]  P. Poulin,et al.  Graphene oxide dispersions: tuning rheology to enable fabrication , 2014 .

[43]  K. Jiang,et al.  Heating graphene to incandescence and the measurement of its work function by the thermionic emission method , 2014, Nano Research.

[44]  Stephen Beirne,et al.  Three dimensional (3D) printed electrodes for interdigitated supercapacitors , 2014 .

[45]  Stefan Hengsbach,et al.  High-strength cellular ceramic composites with 3D microarchitecture , 2014, Proceedings of the National Academy of Sciences.

[46]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[47]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[48]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[49]  Paul V Braun,et al.  High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes , 2013, Nature Communications.

[50]  M. El‐Kady,et al.  Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage , 2013, Nature Communications.

[51]  M. Armstrong,et al.  Evaluating the performance of nanostructured materials as lithium-ion battery electrodes , 2013, Nano Research.

[52]  Brian Derby,et al.  Printing and Prototyping of Tissues and Scaffolds , 2012, Science.

[53]  M. Beidaghi,et al.  Micro‐Supercapacitors Based on Interdigital Electrodes of Reduced Graphene Oxide and Carbon Nanotube Composites with Ultrahigh Power Handling Performance , 2012 .

[54]  K. Novoselov,et al.  A roadmap for graphene , 2012, Nature.

[55]  Philip J. Kitson,et al.  Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.

[56]  Hui‐Ming Cheng,et al.  The reduction of graphene oxide , 2012 .

[57]  P. Serp,et al.  Graphene-based materials for catalysis , 2012 .

[58]  A. Ferrari,et al.  Inkjet-printed graphene electronics. , 2011, ACS nano.

[59]  L. Valdevit,et al.  Ultralight Metallic Microlattices , 2011, Science.

[60]  Paul V. Braun,et al.  Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. , 2011, Nature nanotechnology.

[61]  C. Doillon,et al.  Directional migration of endothelial cells towards angiogenesis using polymer fibres in a 3D co‐culture system , 2010, Journal of tissue engineering and regenerative medicine.

[62]  R. Ruoff,et al.  Graphene and Graphene Oxide: Synthesis, Properties, and Applications , 2010, Advanced materials.

[63]  W. Lu,et al.  Improved synthesis of graphene oxide. , 2010, ACS nano.

[64]  P. Avouris,et al.  Thermal infrared emission from biased graphene. , 2010, Nature nanotechnology.

[65]  Franklin Kim,et al.  Graphene Oxide: Surface Activity and Two‐Dimensional Assembly , 2010, Advanced materials.

[66]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[67]  Yuyan Shao,et al.  Graphene Based Electrochemical Sensors and Biosensors: A Review , 2010 .

[68]  R. Ruoff,et al.  The chemistry of graphene oxide. , 2010, Chemical Society reviews.

[69]  Xiaosong Huang,et al.  Fabrication and Properties of Carbon Fibers , 2009, Materials.

[70]  Daniel A. Steingart,et al.  A super ink jet printed zinc–silver 3D microbattery , 2009 .

[71]  Stephen Mann,et al.  Fabrication of Graphene–Polymer Nanocomposites With Higher‐Order Three‐Dimensional Architectures , 2009 .

[72]  G. Eda,et al.  Graphene-based composite thin films for electronics. , 2009, Nano letters.

[73]  Justin C. Lytle,et al.  Multifunctional 3D nanoarchitectures for energy storage and conversion. , 2009, Chemical Society reviews.

[74]  Y. Gogotsi,et al.  Materials for electrochemical capacitors. , 2008, Nature materials.

[75]  E. Yoo,et al.  Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. , 2008, Nano letters.

[76]  L. Brinson,et al.  Functionalized graphene sheets for polymer nanocomposites. , 2008, Nature nanotechnology.

[77]  G. Eda,et al.  Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material. , 2008, Nature nanotechnology.

[78]  J. Flege,et al.  Epitaxial graphene on ruthenium. , 2008, Nature materials.

[79]  M. Armand,et al.  Building better batteries , 2008, Nature.

[80]  K. Müllen,et al.  Transparent, conductive graphene electrodes for dye-sensitized solar cells. , 2008, Nano letters.

[81]  H. Dai,et al.  Electrically driven thermal light emission from individual single-walled carbon nanotubes. , 2007, Nature nanotechnology.

[82]  K. Novoselov,et al.  Detection of individual gas molecules adsorbed on graphene. , 2006, Nature materials.

[83]  A. Savvatimskiy,et al.  Measurements of the melting point of graphite and the properties of liquid carbon (a review for 1963–2003) , 2005 .

[84]  Bruce Dunn,et al.  Three-dimensional battery architectures. , 2004, Chemical reviews.

[85]  B. Wei,et al.  Carbon nanotube filaments in household light bulbs , 2004 .

[86]  J. Ellis,et al.  Cosmology: Synchrotron radiation and quantum gravity , 2003, Nature.

[87]  G. Neuer,et al.  Spectral and total emissivity measurements of highly emitting materials , 1995 .