Reduction of crosshatch roughness and threading dislocation density in metamorphic GaInP buffers and GaInAs solar cells

Surface crosshatch roughness typically develops during the growth of lattice-mismatched compositionally graded buffers and can limit misfit dislocation glide. In this study, the crosshatch roughness during growth of a compressive GaInP/GaAs graded buffer is reduced by increasing the phosphine partial pressure throughout the metamorphic growth. Changes in the average misfit dislocation length are qualitatively determined by characterizing the threading defect density and residual strain. The decrease of crosshatch roughness leads to an increase in the average misfit dislocation glide length, indicating that the surface roughness is limiting dislocation glide. Growth rate is also analyzed as a method to reduce surface crosshatch roughness and increase glide length, but has a more complicated relationship with glide kinetics. Using knowledge gained from these experiments, high quality inverted GaInAs 1 eV solar cells are grown on a GaInP compositionally graded buffer with reduced roughness and threading disl...

[1]  E. Fitzgerald,et al.  Surface morphology of related GexSi1−x films , 1992 .

[2]  John E. Ayers,et al.  The measurement of threading dislocation densities in semiconductor crystals by X-ray diffraction , 1994 .

[3]  Richard K. Ahrenkiel,et al.  Optimization of buffer layers for lattice-mismatched epitaxy of GaxIn1−xAs/InAsyP1−y double-heterostructures on InP , 2007 .

[4]  E. Fitzgerald,et al.  Novel dislocation structure and surface morphology effects in relaxed Ge/Si-Ge(graded)/Si structures , 1997 .

[5]  D. C. Law,et al.  Band gap‐voltage offset and energy production in next‐generation multijunction solar cells , 2011 .

[6]  A. Ptak,et al.  Control of asymmetric strain relaxation in InGaAs grown by molecular-beam epitaxy , 2010 .

[7]  D. Law,et al.  40% efficient metamorphic GaInP∕GaInAs∕Ge multijunction solar cells , 2007 .

[8]  Thomas A. Langdo,et al.  Controlling threading dislocation densities in Ge on Si using graded SiGe layers and chemical-mechanical polishing , 1998 .

[9]  Eugene A. Fitzgerald,et al.  Dislocations in strained-layer epitaxy : theory, experiment, and applications , 1991 .

[10]  R. Beanland,et al.  A study of surface cross-hatch and misfit dislocation structure in In0.15Ga0.85As/GaAs grown by chemical beam epitaxy , 1995 .

[11]  Mayank T. Bulsara,et al.  Dislocation dynamics in relaxed graded composition semiconductors , 1999 .

[12]  John F. Geisz,et al.  In situ stress measurement for MOVPE growth of high efficiency lattice-mismatched solar cells , 2008 .

[13]  W. Pompe,et al.  Modeling cross-hatch surface morphology in growing mismatched layers , 2002 .

[14]  G. Stoney.  The Tension of Metallic Films Deposited by Electrolysis , 1909 .

[15]  Eugene A. Fitzgerald,et al.  Relaxed, high-quality InP on GaAs by using InGaAs and InGaP graded buffers to avoid phase separation , 2007 .

[16]  A. Ptak.  Low-misfit epilayer analyses using in situ wafer curvature measurements , 2011 .

[17]  S. Nagata,et al.  Self‐masking selective epitaxy by molecular‐beam method , 1977 .

[18]  P. Haasen,et al.  Creep and dislocation velocities in gallium arsenide , 1978 .

[19]  H. Queisser,et al.  Detailed Balance Limit of Efficiency of p‐n Junction Solar Cells , 1961 .

[20]  Diana L. Huffaker,et al.  Strain relief by periodic misfit arrays for low defect density GaSb on GaAs , 2006 .

[21]  Diana L. Huffaker,et al.  Device Characteristics of GaInSb/AlGaSb Quantum Well Lasers Monolithically Grown on GaAs Substrates by Using an Interfacial Misfit Array , 2008 .

[22]  James S. Harris,et al.  Dilute nitride GaInNAs and GaInNAsSb solar cells by molecular beam epitaxy , 2007 .

[23]  D. Arent,et al.  The Effect of Phosphine Pressure on the Band Gap of Ga 0.5 In 0.5 P , 1994 .

[24]  Ya-Hong Xie,et al.  Influence of strain on semiconductor thin film epitaxy , 1997 .

[25]  J. Boeckl,et al.  Impact of dislocations on minority carrier electron and hole lifetimes in GaAs grown on metamorphic SiGe substrates , 2004 .

[26]  Daniel J. Friedman,et al.  40.8% efficient inverted triple-junction solar cell with two independently metamorphic junctions , 2008 .

[27]  Charles Howard Henry,et al.  Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells , 1980 .

[28]  R. Beanland,et al.  Plastic relaxation and relaxed buffer layers for semiconductor epitaxy , 1996 .

[29]  Cullis,et al.  Misfit dislocation sources at surface ripple Troughs in continuous heteroepitaxial layers. , 1995, Physical review letters.

[30]  Ferreira,et al.  First-principles calculation of temperature-composition phase diagrams of semiconductor alloys. , 1990, Physical review. B, Condensed matter.

[31]  Don Monroe,et al.  Relaxed GexSi1−x structures for III–V integration with Si and high mobility two‐dimensional electron gases in Si , 1992 .

[32]  Steven A. Ringel,et al.  Comparison of mixed anion, InAsyP1−y and mixed cation, InxAl1−xAs metamorphic buffers grown by molecular beam epitaxy on (100) InP substrates , 2004 .

[33]  Sarah R. Kurtz,et al.  High-efficiency GaInP∕GaAs∕InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junction , 2007 .